SANISPEED 0026P SFA Compact Lifting Stations Instruction Manual
- June 5, 2024
- SANISPEED
Table of Contents
SANISPEED 0026P SFA Compact Lifting Stations
INSTALLATION INSTRUCTIONS
TOOLS
ASSEMBLY
DIMENSION
PARTS
DESCRIPTION
This pump is (manufactured in a factory which is quality) certified to ISO 9001, ISO 14001. Installed and used correctly, the unit will give consistent and reliable service. This device is not designed for persons (including children) with limited physical, sensory or mental abilities, or those with minimal experience and knowledge, unless they are monitored and are given the necessary instructions for using the device, with the help of a person responsible for their safety. Monitor children and make sure they do not play with the device.
APPLICATIONS
This device is a pump designed to evacuate waste water from private dwellings
(except for water coming from WC’s).
SANIVITE®, SANISPEED® and SANIPUMP 2® are designed to handle the waste
evacuation from a bath, kitchen sink, dishwasher and washing machine. Its
powerful pump will deal with every day normal usage.
SANISHOWER® FLAT/ SANIDOUCHE® FLAT is designed to handle the waste from a
shower and handbasin. Sanispeed will take the above at a heavier duty rate of
usage.
SANISHOWER®/SANIPUMP 1® is designed to take the waste from a shower and
handbasin. This appliance conforms to EN 12050-2 and the European standards
concerning electrical safety and electromagnetic compatibility. To view the
DoP (Declaration of performance) please click on the ‘Illustrations and
Datasheet’ tab on each product page on our website.
INSTALLATION
The unit should be installed in the same space as the connected facilities and should be accessible for possible service. The fitting and working of your appliance must meet local regulations and the EN 12056-4 standard. To optimise the latest technical developments concerning soundproofing incorporated into this unit, it is important to:
- fix the discharge pipe correctly, with distances of not more than one metre between the fastenings.
CONNECTION TO THE ELECTRICAL SUPPLY
The electrical installation should be carried out by a qualified person. The unit should be connected to a fully earthed electrical supply. All wiring must conform to BS7671, 1992 requirements for electrical installations. The unit requires a 220/240V single phase AC 50 Hz supply (UK specification). Do not connect the unit to a conventional plug and socket. It must be wired into a fused, unswitched, fixed wiring connector fitted with a 5 amp fuse. The wires in the mains lead are coloured in accordance with the following code:
- Brown – Live
- Blue – Neutral
- Green/Yellow – Earth
Warning: Ensure the electricity is turned OFF at the main switch board before wiring to connector. All work on cable, pressure chamber and motor should only be carried out by a qualified Saniflo servicing agent, as special tools are required.
COMMISSIONING THE UNIT
Once electrical and plumbing connections have been made, check that all seals, and connections are watertight. Check both the discharge pipework from the unit and the other sanitary appliances connections.
MAINTENANCE
WARNING !!!
If away for a long period, we recommend that you turn off the water supply to
the WC served by the unit.
CARE OF YOUR UNIT
In order to remove scale and clean the pump, use a household descalent (like
SANIFLO Cleanser/descalent).
FAULT FINDING / REMEDIES
IN ALL CASES, YOU MUST DISCONNECT THE PUMP FROM THE POWER SUPPLY
GUARANTEE
2 years guarantee as from its date of purchase subject to correct installation
and correct use.
Warning: Do not dispose of solvents, paints (do not wash paint brushes in
sink), caustic, acid or other chemicals into these products