mibro S1 Wireless Earbuds User Manual

**mibro S1 Wireless Earbuds User Manual

**

Thank you for choosing our product, hope the fashionable appearance and high quality stereo can enrich your life.
Note: Please fully charge it with the charging case before the first use when you receive the product.

Identifying Key Parts

1. Charging Pin
2. Touch Multi-function Button(MFB)
3. Main Microphone
4. Noise Reduction Microphone
5. LED Indicator
6. Charging Pin
7. Charging Box Battery Indicator

Charging

When charging, the light on the side of the charging case will flicker in a circle, and the light will stay on constantly after being fully charged.

• Charging when the indicator light flashes.
• When all four indicators are on, the battery is fully charged.

Getting Starts

1. Slide the charging box upwards, and the Earbuds will automatically turn on and into the bluetooth pairing mode.
2. Open the Bluetooth of your phone system, search the Bluetooth name “Mibro Earbuds S1”, click the device name and complete the pairing.
3. Take out the earbuds and wear it. You will hear a “beep” sound, indicating that both ears are connected and music can be played.

Getting Off

The earbuds turn off automatically if:

1. You put earbuds back to the charging case.
2. When earbuds leave the charging case, but haven’t connect to any devices within 5 minutes.
3. When the earphone battery is low (please charge it in time).

For above situation, please press and hold the MFB for 8 seconds to Power ON.

Functions

You can operate MFB to get certain functions as below:

1. Power On/Off
   In the on/off state, long press for 8 seconds to switch off/on.

2. Play / Pause
   When playing music, double-click MFB(R or L) to pause , double-click again to resume.

3. Previous Track /Next Track
   When playing music, Quick triple hit MFB(L) to previous track, Quick triple hit MFB(R) to next track.

4. Volume Increase Or Decrease
   When playing music, Click MFB(L) once to decrease the volume, Click MFB(R) once to increase the volume.

5. Start voice assistant
   In the Bluetooth connection state, Quick triple hit MFB(L or R) to activate the voice assistant.

6. Answer/End a call
   When there’s an incoming call,Click MFB once to answer ,you can end it by double-click MFB again.

7. Reject An Incoming Call
   When there’s an incoming call press and hold the MFB for 3 seconds to reject.

Safety Rules

• Avoid dripping and dropping.
• Use original or certified cables.
• Never disassemble or modify your earbuds for any reasons to avoid any damages and dangers.
• Keep the earbuds dry and do not submerge it in water.
• Keep out of reach of children, small parts included may be a choking hazard,and avoid using the LED indicator close to the eyes of children or animals.
• Do not use this earbuds during a thunderstorm to avoid irregular function and increased risk of the electric shock.
• Clean with a dry, soft lint-free cloth, do not use harsh chemicals or strong detergents to clean.
• The product shall not be exposed to excessive hot or wet

Hearing Safety

• To avoid hearing damage, do not listen for long time at high volume.
• Do not turn the volume so high that you’re unable to hear your surroundings.
• Do not use earbuds while driving.
• You should use with caution or temporarily discontinue using in potentially hazardous situations.

Name and content of hazardous substances

This table is prepared in accordance with GB/T 26572.

O: Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T 26572.
X: It means that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/T 26572.

Performance failure and after sales regulations

party cannot hear the sound. 3. Unable to charge, the charging indicator is not on.

Non warranty regulations

1. Wear and dirt caused by users’ use, such as scratches and color changes; As well as damage caused by contact with chemical reagents, sharp objects, falling, extrusion and deformation;
2. Unauthorized maintenance, collision, misuse, negligence, abuse, water ingress, accidents, and failures caused by the use of non-standard accessories of the product;
3. Tearing, altering labels, forging anti-counterfeiting marks, etc.
4. Damage caused by force majeure;
5. Non compliance with performance faults listed in the performance fault table;

If you need after-sales service, please contact Mibro customer service：
Website： www.mibrofit.com customer service： 400-0908-508

Attention:
The illustrations of products and accessories in the manual are schematic diagrams for users’ reference only. Due to the update and upgrading of this product, the actual product may be different from the schematic diagram. Please take the actual product as the standard!

Mibro brand owns the final right to interpret the goods

FAQ

Q: The earbuds is silent while another is sound.
A:

1. It may be that both earbuds can not be connected normally. In extreme cases, this kind of situation will occur. Please put the earbuds back into the charging box, take it out and reconnect it after 8 seconds of reset;
2. It may be that the silent earbuds is dead. Please put both ebuds back into the charging box and fully charge them before taking them out for reuse.

Q: The earbuds didn’ t responsive when I get them from the charging case, it can’t turn on automatically.
A: Please check the power of charging case, if there is no power the earbuds can’t turn on automatically or you can manually turn it on (long touch MFB for 2 seconds).

Q: I have established connection with my smartphonea, but I am not hearing any sounds?
A: Please make sure that you have turned up the volume of both devices
Smartphone requires you to set up the Bluetooth earbuds as an audio output devices before transimition of sound. Please check the instruction of your smartphone for details. If you are using a music player or other Bluetooth devices, please make sure it supports A2DP stereo music profile.

Q: Why the connection is not stable and cuts out intermittently?
A: Please make sure there are no obstacles between the earbuds and your Bluetooth device; please make sure there is no radio or WiFi interference nearby.

Q: The sound is not very clear or the caller cannot hear my voice clearly.
A: Please adjust the volume on your phone and earbuds. Make sure there is no source of interference nearby. Stay close to your smartphone check if there’s any improvement.

Parking List

Charging Box X1, Earbuds X2, Charging cable X1, User Manual X1

Basic Parameters

Earbuds Basic Parameters:

BT Model: XPEJ003
BT Version: V5.0
BT Range: ≤10m/33ft
Battery Capacity: 35mAh（Per Earbuds）
Charging Time: About 1.5 hours
Play Time: About 5 hours
Stand By: About 60 hours
Input: 5V 100mA
Battery Type: Lithium ion polymer
Weight: About 3.8g（Per Earbuds）
Waterproof: IPX5

Charge Box Basic Parameters:

Battery Capacity: 600mAh
Input: 5V 500mA
Output: 5V  150mA
Charging Time: About 4 hours
Battery Type: Lithium ion polymer
Weight: About 42g

Manufacturer:
Zhenshi Information Technology (Shanghai) Co., Ltd.

Address:
Room 4015, Building 2, No. 588, Zixing Road, Minhang District, Shanghai

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>