Lenco HPB-110 Foldable Kids Bluetooth Headphone User Manual
- June 5, 2024
- Lenco
Table of Contents
Lenco HPB-110 Foldable Kids Bluetooth Headphone
Usage of controls or
adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
-
Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2″) free space around the whole device.
-
lnstall in accordance with the supplied user manual.
-
Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°c.
-
Avoid using the device near strong magnetic fields.
-
Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
-
Warning!
Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product. -
Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
-
The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
-
Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
-
.Although this device is manufactured with the utmost care and checked several times before leaving the factory, ii is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
-
This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
-
Keep away from animals. Some animals enjoy biting on power cords.
-
To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
-
The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
-
Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
-
lf the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.
-
The rating label has been marked on the bottom or back panel of the device.
-
This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
-
This product is intended for non-professional use only and not for commercial or industrial use.
-
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
-
Never remove the casing of this device.
-
Never place this device on other electrical equipment.
-
Do not allow children access to plastic bags.
-
Only use attachments/accessories specified by the manufacturer.
-
Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.
-
lf the product is delivered with power cable or AC power adaptor:
- If any trouble occurs, disconnect the AC power cord and refer servicing to qualified personnel.
- Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
- Unplug this device during lightning storms or when unused for a long period.
- The socket outlet must be installed near the equipment and must be easily accessible.
- Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
- Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
- Devices with class 2 construction do not require an earthed connection.
- Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
- Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
-
lf the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:- “Do not ingest battery, Chemical Bum Hazard” or equivalent working.
- The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
-
Caution about the use of Batteries:
- Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
- Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- Attention should be drawn to the environmental aspects of battery disposal.
- Unpack all parts and remove protective material.
- Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
Accessories Included:
**** Manual| | Sheet with Stickers (HPB-110BU)
|
---|---|---|---
Micro USB Charging Cable| **
Audio Cable| | **
- Charging indicator light
- USB charging port
- 3.5mm Line-in
- Microphone
- Decrease volume/ previous song
- Increase volume /next song
- MFB(Pause /Play/ Answer/ Hamg up / Redail)
Battery Warning:
When your headsets battery is low it will warn you with a beep every 60
seconds. Please charge the battery when hearing this warning. If you don’t,
the device will turn off automatically.
Charging the battery:
Plug the included Micro USB cable into the USB charging port. Plug the other
end of the cable into your computer or other USB charging device. When
charging the device the charging light will be red. Once your headphone is
fully charged the light will turn blue. Charging time is about 3 hours.
Bluetooth:
To connect your Lenco HPB-110 with your Bluetooth device you’ll have to turn
on the device, press and hold the MFB till you hear a prompt tone. Once you
turned on your Lenco HPB-110 it will go into the pairing mode, the indicator
light will now flash red and blue. Now you can search for the “Lenco HPB-11 O”
on your Bluetooth device and connect with it. When properly connected you hear
a prompt sound and the indicator light will now flash blue.
NOTE:
If the headset has been paired with another device previously it will
automatically reconnect with it until out of range or if the device has its
Bluetooth disabled.
To disconnect the headset from your device, switch off the headset, or
disconnect it in the Bluetooth menu of your device. To reconnect the headset
to the phone or Bluetooth devices that you have last used with it, switch on
the headset, or make the connection in the Bluetooth menu of your device.
Application:
Your Lenco HPB-110 can make and receive calls hands-free with your compatible
mobile phone and listen to music from a compatible Bluetooth device if in
working Bluetooth range. (10 meters/33 feet)
Calls:
To make a call, use your mobile phone in the normal way when the headset is
connected. You can answer an incoming call by short pressing the MFB, or hold
the MFB in for about 1.5 seconds to reject the call. To end a call, short
press the MFB.
Redial Function
To use redial function, quickly press MFB twice to redial the previous number
you called on your phone.
Music:
- To listen to music, connect the headset to phone or compatible Bluetooth. The available music depends on your Bluetooth devices.
- If you receive or make a call while listening to music, the music is paused until the call ends.
- To start a song use your phone or other Bluetooth device and play the song you want.
- To pause or resume playing a song, press the MFB key.
- To select the next song during playback, short press the “+” key.
- To select the previous song, short press the “.” key.
- To increase the volume, press the “+” button for 2 seconds.
- To decrease the volume, press the”.” button for 2 seconds.
NOTE:
The maximum volume level of the headset is limited to 85dB for hearing
protection.
Line-in:
You can use “Lenco HPB-110” as a wired headphone to save batteries. Simply
connect the included 3.5mm audio cable to the headphone and your audio device.
NOTE:
Inserting an audio cable disable the wireless functionality.
Specification
Bluetooth chipset | JL, Bluetooth V5.0 |
---|---|
Radio Frequency coverage | 2.402GHz ~ 2.480GHz |
Pairing products | Bluetooth computer with HFP, A2DP, AVRCP Bluetooth protocol, |
USB Bluetooth adapter, Bluetooth cell phones, etc.
Transmit Range| about 1Om (barrier free)
Frequency Response| 20HZ-20KHZ
Driver unit| 40mm
Impedance| 320
Driver unit Frequency| 20Hz – 20KHz
Headset max volume| 85dB
Microphone sensitivity| 42dB
Battery| Rechargeable lithium ion battery; 3.7V, 250mAh
Charge| Computer USB interface, output DC 5V/500mA charger
Charging time| 3 hours
Working time| 20 hours with 50% Volume
Guarantee
Lenco offers service and warranty in accordance to European law, which means
that in case of repairs (both during and after the warranty period) you should
contact your local dealer.
Important note:
It is not possible to send products that need repairs to Lenco directly.
- If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore
some of the instruction, specifications and pictures in this documentation may
differ slightly from your particular situation. All items described in this
guide for illustration purposes only and may not apply to particular
situation. No legal right or entitlements may be obtained from the description
made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should
not be disposed of as general household waste in Europe. To ensure the correct
waste treatment of the product and battery, please dispose them in accordance
to any applicable local laws of requirement for disposal of electrical
equipment or batteries. In so doing, you will help to conserve natural
resources and improve standards of environmental protection in treatment and
disposal of electrical waste (Waste Electrical and Electronic Equipment
Directive).
CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands,
declares that this product is in compliance with the essential EU directive
requirements.
The declaration of conformity may be consulted via
techdoc@commaxxgroup.com
Service
For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1 a, 6361 HB Nuth, The
Netherlands.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>