Royal Sovereign RAC-1020B 20 Inch High Velocity Air Circulator Instruction Manual
- June 5, 2024
- Royal Sovereign
Table of Contents
Royal Sovereign RAC-1020B 20 Inch High Velocity Air Circulator
PRECAUTIONS FOR USE
Electrical Specifications and Power Cord
Check to ensure that the electrical service being used is adequate for the
model you’ve chosen.
The electrical rating of your new fan is defined on the serial sticker on the
unit. Please refer to the rating when checking electrical requirements to
ensure they meet the electrical codes of your location.
- Unplug or disconnect the fan from the power supply before servicing.
- Warning: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device.
- This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and / or repair.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and / or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
- This fan has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
PRODUCT VIEW
- 3 SPEED CONTROL BUTTON
- CARRYING HANDLE
- TILT-ADJUSTABLE FAN HEAD
- DURABLE MOLDED PLASTIC SAFETY GRILL
- FAN BASE
FAN ASSEMBLY
- Ensure that the fan power cord is disconnected from the electrical power supply Install feet before operating the fan.
- Place the foot over the opening of the base and clip into place over the locking tabs with the arrow marking pointing towards the front of the fan. Repeat with the other foot.
OPERATION
- Place the fan on a dry and firm level surface.
- the power cord and plug the cord into an electrical outlet.
- Turn the fan ON by pressing the desired speed setting (1 – Low, 2 Medium and 3- High).
- To adjust the air directio n, rotate/ tilt the fan head up/down.
- To turn fan OFF, set the speed setting to ‘0’.
WARNING : ALWAYS UNPLUG THE PRODUCT FROM THE ELECTRICAL OUTLET WHEN NOT IN USE.
Maintenance
- Before cleaning, unplug the fan.
- Clean the fan with a soft cloth and a mild dishwashing liquid to wipe down the fan.
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE,DO NOT EXPOSE TO WATER OR RAIN.
General Use
- Do not block air outlets with any obstacles.
- Do not insert any objects into the fan.
- Do not pour water on the housing or control panel.
- Do not place heavy items or sit on the fan.
- Never pull or damage the power cord in any way.
- This fan is not intended for use by persons (including children) with reduced mental capabilities, unless they have been given supervision or instruction concerning the use of appliance by a person responsible for their safe.
Cleaning and maintaining
- Always unplug the fan when cleaning your fan. Wipe the unit with a soft wet cloth. Don’t use solvents or abrasives.
- Allow sufficient drying time before operating again.
- To prevent damage, do not attempt to dismantle the fan with a sharp instrument.
- We recommend that the fan be cleaned and packed in its original packaging and stored in a cool, dry place.
SPECIFICATIONS
| Model | RAC- 1020B |
|---|---|
| Voltage/Frequency | 120v/ 60W |
| Input Power | 95W |
| Tilt | 180° |
| Sound | 68-75dB |
| Dimensions (w x d x h) | 24” x 9.7” x 23.5” |
| Weight | 7.0 lbs |
WARRANTY
Royal Sovereign warrants each fan to be free from defects in material and workmanship. Our obligation under this warranty is limited to the repair or replacement, free of charge, when delivered to an authorized Royal Sovereign service center, of any defective part(s) thereof, other than parts damaged in transit. This warranty is in effect to the original purchaser, for a period of one year from the date of purchase and is not transferable. This warranty shall apply only if the fan is used in accordance with the factory-provided instructions which accompany it.
Exclusions This warranty excludes and does not cover defects, malfunctions or failures of your Royal Sovereign Fan, caused by repairs by unauthorized persons or service centers, mishandling, improper installation, modification or unreasonable use including incorrect voltage, acts of God, or failure to provide reasonable and necessary maintenance. This warranty is in lieu of any and all expressed warranties. In no event shall Royal Sovereign be liable for consequential or incidental damages. This limitation would not apply if you live in a location that does not permit the exclusion of limitation of incidental or consequential damages.
RS INTERNATIONAL CANADA INC.
191 Superior Blvd., Mississauga, ON L5T 2L6 CANADA
TEL: 905-461-1095
e-mail: ca.support@royalsovereign.com
www.royalsovereign.ca
For product support and warranty questions, please visit us at
www.royalsovereign.ca/customer-support.html