LA CROSSE TECHNOLOGY 616A-56647 Travel Projection Alarm Clock User Guide

June 5, 2024
LA CROSSE TECHNOLOGY

LA CROSSE TECHNOLOGY 616A-56647 Travel Projection Alarm Clock

LA-CROSSE-TECHNOLOGY-616A-56647-Travel-Projection-Alarm-Clock-
Product

POWER UP

  1. With the cover/stand closed, insert two AAA batteries (not included) into the back of the projection alarm. Observe correct polarity.
  2. Firmly pull the cover/stand open from the top to view the clock.
  3. Optional Micro-USB power cable (included) for constant, adjustable backlight and projection. Insert the Micro-USB end of the cable into the clock and the USB end into your computer USB port or a USB outlet.
    LA-CROSSE-TECHNOLOGY-616A-56647-Travel-Projection-Alarm-Clock-
fig-1

Restart:
Unplug the Micro-USB cable and remove batteries from the projection alarm, press any button 20 times. After 15 minutes, return to Step 1 above.

BUTTONS

LA-CROSSE-TECHNOLOGY-616A-56647-Travel-Projection-Alarm-Clock-
fig-2

SETTINGS MENU

Important: Only press or hold one button at a time to adjust settings.

  1. Hold the MODE/SET button to enter the Settings Menu.
  2. Press and release the ▲UP or ▼ DOWN buttons to adjust values. Hold to adjust quickly.
  3. Press the MODE/SET button to confirm adjustments and move to the next item.

Settings Menu Order:

  • 12/24 Hour Time Format
  • Hour
  • Minutes
  • Year
  • Month
  • Date

Weekday: Weekday will set automatically when Year, Month and Date are set.

TIME ALARM

Set Alarm:

  1. Press the ALARM button to view alarm time. While viewing, hold the ALARM button to enter the Alarm Settings.
  2. Press and release the ▲UP or ▼ DOWN buttons to adjust values.
  3. Press the ALARM button to confirm and move to the next item.

Alarm Settings Order:

  • Hour
  • Minutes

Silence a sounding alarm: Press any button except SNOOZE/LIGHT to silence the alarm for 24 hours.
Activate/Deactivate Alarm:

  1. Press the ALARM button to view alarm time. While viewing, hold the ALARM button to activate or deactivate the alarm.
  2. The Alarm Icon will show when an alarm is active.

Snooze:

  • When the alarm sounds, press the SNOOZE/LIGHT button to silence the alarm for 10 minutes. Zz will show.

Note: The alarm will sound with increasing frequency for two minutes, then shut off automatically if not silenced.

CUSTOM DISPLAY MODES

Press the MODE/SET button to switch between the Alarm Time and Calen-dar displays. LA-CROSSE-TECHNOLOGY-616A-56647-Travel-Projection-Alarm-Clock-
fig-4

ADJUSTABLE BACKLIGHT

When using Micro-USB Power:

  • Press the SNOOZE/LIGHT button to adjust the backlight intensity.
  • There are 2 brightness levels, plus an off option.

When using Battery Power:

  • Press the SNOOZE/LIGHT button to view the Backlight and Projection Image for 10 seconds.
  • Constant backlight requires the use of the included Micro-USB power cable.

PROJECTION

Tilt Image: The Projection Arm can tilt forward and backward helping to find the perfect location on your wall or ceiling.
Rotate Image: Press the ▲UP button to rotate the projected image in 90° increments.
Battery Power: Press the SNOOZE/LIGHT button to view the projection image and backlight for 10 seconds.
IMPORTANT: The clock needs to be powered with the included Micro-USB cable for a constant projection.

USB CHARGING PORT

Important: The Clock must be connected to Micro-USB Power to charge a mobile device.

  • Connect your external device’s USB charging cable (not included) to the USB Charging Port.
  • Charging times will vary.
  • USB Power Output: 1 Amp maximum current.
  • Charge 1A devices or devices that are self-regulating.

Note: This clock was not designed to charge tablets or other devices requiring more than a 1A current. LA-CROSSE-TECHNOLOGY-616A-56647-Travel-
Projection-Alarm-Clock-fig-5

SPECIFICATIONS

  • Power Requirements: 2 “AAA” batteries (not included)
  • Optional: Micro-USB Power Cord (included)
  • Battery Life: Over 6 months
  • Dimensions:
  • Open: 4.5” L x 3” W x 3” H (114.3 x 76.2 x 76.2 mm)
  • Closed: 4.5”L x 0.94” W x 3” H (114.3 x 24 x 76.2 mm)

WE’RE HERE TO HELP
If you require additional support, get in touch with our friendly customer support team based in La Crosse, WI. Our Associates are available
Mon-Fri: 8am-6pm CST
Phone: 1.608.782.1610
Email: bit.ly/contact_techsupport
Self-Help: bit.ly/616a-56647

Scan for Self-Help

CA WARNING

This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to: www.P65Warnings.ca.gov

BATTERY INSTRUCTIONS

Battery replacement instruction:
When batteries of different brands or types are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference in voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.

  • Always purchase the correct size and grade of battery most suitable for the intended use.
  • Always replace the whole set of batteries at one time, taking care not to mix old and new ones or batteries of different types.
  • Clean the battery contacts and those of the device prior to battery installation.
  • Ensure the batteries are installed correctly with regard to polarity (+ and -).
  • Remove batteries from the product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
  • Remove used batteries promptly.
  • For recycling and disposal of batteries, and to protect the environment please check the internet or your local phone directory for local recycling centers and/ or follow local government regulations.

STAY IN TOUCH

Ask questions, watch setup videos, and provide feedback on our social media outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook, and Instagram.

WARRANTY

La Crosse Technology, Ltd. provides a 1-year limited-time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. La Crosse Technology, Ltd, 2830 S. 26th St. La Crosse, WI 54601 For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty

Patents:
www.lacrossetechnology.com/patents

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using an electronic, mechanical, or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error or their consequences. All trademarks and patents are recognized.

CANADA STATEMENT

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

LA CROSSE TECHNOLOGY User Manuals

Related Manuals