Insignia NS-RMT8D21 Eight-device Universal Remote User Guide

Insignia NS-RMT8D21 Eight-device Universal Remote

Introduction

Thank you for purchasing the Insignia Eight-device Universal Remote Control. This remote can be used to control a TV, a streaming device, a set top box, a Blu-ray or DVD player, a sound bar or audio receiver, and an auxiliary device, and boasts several extra features to make the most of your living room experience.
This manual will help you to set up your Insignia universal remote control to control eight of your devices and take advantage of its features.

IMPORTANT SAFEGUARDS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Refer all servicing to qualified service personnel.
6. Remote control batteries should not be exposed to excessive heat such as sunshine, fire, or the like.

Features

•  Controls up to eight devices – your TV, Streaming device, Blu-ray Player, sound bar, cable box/satellite receiver (STB), and Auxiliary device
• Easy pre-programing connects to your major brand devices without needing a code
• A long 30 ft. (9.1 m) range helps you to minimize remote switching
• Learn-ability feature enables this remote to learn additional functions from your original remote
• Shortcuts let you program specific keys for quick access to your favorite channels and streaming apps
• Fully backlit keys help you operate this remote in dim lighting
•  Audio lock feature adjusts the volume of your sound bar without changing devices
•  Premiere design blends ergonomics and key layout for easy, enjoyable use
•  2 AA batteries required (not included)

Package contents

• Eight-device universal remote control
• User Guide
•  Device Codes

Remote control buttons

STREAMING, or BLURAY devices. See Understanding and using Activities on page 16.
3| (Watch TV)| Combines control of your TV with your STB, and AUDIO devices. See Understanding and  using Activities on page 16.
4| STREAM| Control your STREAMING device.
5| TV| Control your TV.
6| BLU| Control your Blu-ray player.
7| AUDIO| Control your Audio device.
8| (fast reverse)| Fast reverse device playback.
9| (stop)| Stop device playback.
10| **(play/pause)| Play or pause device playback.
11| LIVE| Return to live TV from time shift or recording.
12| GUIDE| Display the program guide.
13| INFO| Display information about current shows or channel.
14| Menu navigation| Navigate onscreen menus.
15| BACK| Go back one step in an onscreen menu.
16| VOL + / VOL –| Increase or decrease the volume.
17| Green| Access news channels.
18| Red| Access sports channels.
19| A, B, and C| Access programmable app shortcuts
20| Number buttons| Select channels on the current device. On audio devices, press to select inputs.
21| Dash| Select sub-channels or select extra functions in the Menu mode of your set top box.
22| SETUP| Enter the setup menu for your Insignia universal remote control.
23| (power)| Turn on the selected device.
24| (Watch Movies)| Combines control of your TV, streaming device, and audio. See Understanding and  using Activities on page 16.
25| STB| Control your set top box.
26| AUX| Control your auxiliary device (such as a second TV)
27| DISC| Control your DVD player.
28| SOUND| Control your sound devices, including sound bars, AV receivers and Hi-Fi
29| (fast forward)| Fast forward device playback.
30| REC| Record content.
31| REPLAY| Repeat the last 30 seconds.
32| LIST| Show a list of recordings.
33| MENU| Show the setup menu for the selected device.
34| OK| Select items on the menu.
35| HOME| Go to the home menu.
36| EXIT| Exit the menu.
37| LAST| Go to the last channel viewed.
38| CH +/ CH –| Go to the next or last channel.
39| MUTE| Mute the volume of the current device.
40| Blue| Access kids channels.
41| Yellow| Access movie channels.
42| ENTER| Enter the channel selected on the numeric buttons.
43| Backlight**| Turn the button backlight on or off.

Setting up your universal remote control

Installing the batteries

Your remote control requires two AA batteries (not included).

1. Remove the battery compartment cover from the back of your remote control.

2. Insert two AA batteries (not included) into the battery compartment, making sure that the + and – symbols on the batteries match the + and – symbols inside the battery compartment.

3. Replace the battery compartment cover.

CAUTIONS:

• Do not spill water or any liquid on your remote control.
• Do not place your remote control on a wet surface.
•  Do not place your remote control in direct sunlight or near sources of excessive heat.
• If your remote control is not going to be used for a long time, remove the batteries to avoid any damage that may be caused by leakage and corrosion.

Programming and using your remote control

Your Insignia universal remote control is
pre-programmed to control eight of the most popular devices, right out of the box. If you have one of the following devices, try putting the batteries in and pressing the corresponding device button (for example TV or STB), and then press a few function buttons to see if your remote controls your device.

If your device is not one of those listed above, or you have extra devices to set up, there are three ways to do this. The easiest is SimpleSet which is used for the most common brands and devices.

Setup method 1 – SimpleSet

If the brand of your device is shown in the SimpleSet tables below, you can use the SimpleSet system. Locate the brand of your device and note the numeric button associated with it.

TV + AUX

STREAM

STB (set top box)

AUDIO + SOUND

BLURAY and DVD

1. Turn on your device and point your Insignia universal remote control at it (if you are setting up a streaming device, make sure a movie or TV program is playing).
2. Press the device button you want to set up (for example TV).
3. Press and hold the SETUP button until the LED on your remote button blinks twice.
4. Press and hold the number button for your brand and device, as listed in the tables above (for example, 3 for a Phillips TV). Your remote will send the power signal every three seconds.
5.  Release the button as soon as your device turns off. The LED blinks twice and your remote will now operate your device.
   Note: If one or more buttons do not work as expected, start again at step
6. Your remote will start with the next code in memory.

Setup method 2 – device codes

If your device brand is not listed in the SimpleSet tables, you can set up your device by using device codes.

1. Turn on your device and point your Insignia universal remote control at it.
2. Press the device button you wish to set up (for example – TV).
3. Press and hold the SETUP button until the LED on your remote button blinks twice.
4.  Enter the first four-number code listed for your brand (for example, 1840 for LG). The LED blinks twice when the last number of the code is entered.
5. Point your remote towards your device and press the (power) button. If the device turns off, your remote is ready to use. If not, repeat steps 2-5 with the next code in the list.
   Note: If your original remote did not have a Power button, try testing with a different button at step 5. For example, try pressing Play or Pause when setting up your streaming device, then see if the device responds.

Setup method 3 – function learning

Your Insignia universal remote control can learn any function from any other working remote control. This is a one-time setup that lets you control any infrared controlled device you have. It also lets you add a button function that may be missing to a spare button on your Insignia universal remote control.
To do this, make sure that you have all of your original remote controls handy, and that they have fresh batteries.

1. Point the original remote control at your Insignia universal remote control from approximately two inches away.

2. Press the button on the original remote control for the device you want to learn functions.

3. Press and hold the SETUP button on your Insignia universal remote control until the LED under the device button blinks twice.

4. Press 975. The LED blinks twice.

5. Press the button you want to learn (for example the
   TV Power button). The LED begins to blink rapidly. 6 Press the corresponding button on the original remote (for example the [power] button). The LED blinks twice to indicate the button has learned correctly.

6.  Repeat steps 5 and 6 for each button you want to learn.
   Notes:
   

   •  Your Insignia universal remote can learn from multiple remotes, but there can only be one function per button.
   • Some remotes send commands differently. If you find that a function cannot be learned, try holding down the button on the original remote instead of pressing and releasing.

7. When your remote has learned all the functions you want, press and hold the SETUP button until the LED under the device button blinks twice.

Hints

• If the LED shows one long blink at step 6, the function was not learned. Try again, beginning at step 5.
• If you find one or more buttons don’t work properly after set up, you can re-enter the learning mode at any time by repeating the procedure from step 1.
•  If one or more of your original remotes aren’t working, you can still set up your Insignia universal remote control by using SimpleSet or the device code setup.

Deleting a learned function

You can delete a learned function and return that button to its original state.

1. Press the button for the device for which you want to delete the function.
2. Press and hold the SETUP button until the LED under the device button blinks twice.
3.  Enter 976. The LED blinks twice.
4.  Press the button you want to reset twice. The LED blinks twice and the learned function has been deleted.

Locking the volume control

If you primarily use one device for controlling volume, for example the TV, it’s possible to program your Insignia universal remote control to only control that device when you use the VOL +, VOL -, or MUTE buttons.

1. Press and hold the SETUP button until the LED on your remote button blinks twice.
2.  Enter 993. The LED blinks twice.
3.  Press the device button for the device to always control the volume (for example TV). The LED blinks twice.

Now, pressing the VOL +, VOL -, or MUTE buttons controls the audio device, no matter what device you are controlling.

Unlocking the volume control

You can unlock the volume control and return your Insignia universal remote control to controlling each device’s volume individually.

1. Press and hold the SETUP button until the LED under the device button blinks twice.
2. Enter 993. The LED blinks twice. The volume control is now connected.

Using channel shortcut macros

In addition to their normal functionality, the red, green, yellow, and blue buttons can be reprogrammed to select your favorite channels by genre. Initially, if you press each of these buttons, they have the same function as your original remote. However, you can reprogram them so that when the buttons are held down for three seconds they send a channel number, then when held down again for three seconds, they will send another channel number. You can group these channels by genre, such as sports, news, movies, and kids.

Adding channel shortcut macros

For example, if the first three sports channels are 200, 201, and 239, you can assign shortcuts to these channels on the red (Sports) button.

1. Select the device you normally use to watch live TV. For example, the STB button to select your set top box.
2. Hold down the SETUP button and the red (Sports) button until the LED blinks twice.
3. Enter the first channel number. In this case, 200.
4. Press and release the red (Sports) button.
5. Enter the next channel number. In this example 201.
6. Press and release the red (Sports) button again.
7. Repeat steps 3 and 4 for each channel shortcut you want to add.
8. After entering the last channel number you want, press and hold the SETUP button. The LED blinks twice and the shortcuts are now programmed.

When watching live TV, hold down the red (Sports) button for three seconds and the first programmed channel is selected (in this example channel 200). Hold down the red (Sports) button again for three seconds and the next programmed channel is selected (in this example channel 201). Using the same procedure, you can program each of the colored buttons with different groups of channel numbers. Each colored button has a different icon
(sports, news, movies, and kids) to help you remember the types of channels that you have programmed there. You can program up to 10 different channel numbers per button.

Canceling channel shortcut macros

You can also reset the colored buttons to default.

1. Press the device button you have programmed (for example STB).
2. Press and hold the SETUP button and the colored button you want to reset (for example the green [News] button) until the LED blinks twice.
3.  Press the green (News) button again.
4.  Press and hold the SETUP button until the LED blinks twice. The button is now reset.

Using app shortcut macros

Your Insignia universal remote control features three app shortcut buttons that can be used to open apps on your smart devices. If your original remote control has a Netflix, Amazon Prime Video, and/or YouTube button, the app shortcut buttons can be programmed to perform the same function. Even if your original remote control did not have buttons like this, but still had the ability to connect to a streaming service, you can use these buttons as shortcuts by programming a macro to them.
Most AV devices which are connected to the internet, such as smart TVs, have one or more applications they can run to access TV viewing via the internet. Examples of these would be Netflix, YouTube, Amazon Prime, or Hulu.

Adding app shortcut macros

To program the macro, you need to know the device you normally use to access the service, and the sequence of buttons you need to press to bring up the service you want. For example, some Panasonic TVs can start Netflix by pressing the Apps button, then Menu Down twice, and finally the OK button.

1. Determine the sequence required for your device, then turn the device on.
2.  Hold down the app shortcut button (A, B, or C) until the LED blinks twice and stays lit.
3. Press the device button for the device you want to use for the macro (for example Stream).
4.  Press the appropriate buttons in the normal sequence. Your remote will operate your device and the macro is recorded in real time.
5.  After you have finished the sequence and the streaming service has started on your device, hold down the app shortcut button (A, B, or C) until the LED blinks twice and turns off. The macro is now stored.

Tips

• Make sure that your Insignia universal remote control is operating the device you want to use to access the streaming service before programming.
•  If the macro doesn’t work as expected, repeat the same sequence to try to program it again.
•  When programming, wait for your device to respond. Your remote will remember the timing.
• The app shortcut macro is tied to one device. Make sure you are watching the correct device.

Understanding and using Activities

Using a standard universal remote control, if you want to control several different devices you need to press different device buttons in order to control each device individually. Using your Insignia universal remote control, you can create an Activity, with which you can group a combination of devices and not have to switch control between them.
For example, if want to control the input of your TV, the channels and guide of your DirecTV STB, and the volume of your sound bar, you would need to swap between these devices by pressing the TV and STB buttons. On your Insignia universal remote control, these devices can be grouped into a single Activity. So by pressing the button for the Watch TV Activity ( ), the input button will control the TV, the VOL +, VOL -, and MUTE buttons will control the sound bar, and all of the other buttons will control the set top box.
Your Insignia universal remote control has three Activity modes, specifically Watch TV ( ), Listen to Music , and Watch Movie ( ). Each of these modes has several devices you can combine.

Watch TV Activity

•  Combination 1 – TV + STB + AUDIO (default)
•  Combination 2 – TV + STB
• Combination 3 – TV + AUDIO
• Combination 4 – TV + SOUND
•  Combination 5 – TV + STB + SOUND

Listen to Music Activity

•  Combination 1 – TV + BLU + AUDIO (default)
• Combination 2 – TV + BLU + SOUND
•  Combination 3 – TV + STREAM + AUDIO
• Combination 4 – TV + STREAM + SOUND
•  Combination 5 – AUDIO only

Watch Movie Activity

• Combination 1 – TV + STREAM + AUDIO (default)
• Combination 2 – TV + STREAM
•  Combination 3 – TV + BLURAY
•  Combination 4 – TV + BLURAY + AUDIO
•  Combination 5 – TV + STREAM + SOUND
•  Combination 6 – TV + BLU + SOUND

If you set the default devices for any Activity on your Insignia universal remote control (for example TV, STB, and Audio for the Watch TV Activity), that Activity will be set up automatically on your remote.
You can also program Activities yourself.

1. Press and hold the SETUP button until the LED under the device button blinks twice. The LED under the current device button stays lit.
2. Press the Activity button you want to set up (for example, Watch TV ( )).
3. Press the number of the combination you want to set (for example 3, for TV + audio in the Watch TV Activity). The LED blinks twice.
4. Press the Activity button ( ). You can return to  controlling by device by using any device button.

Setting up by Activity

As well as selecting your device combinations, Activities can be used to set up a combination of devices. If you have a combination of devices of the below brands, you can use this to easily set up your Insignia universal remote control to control all three devices with just one step using three digits.
The combination of devices for each Activity is:

• Watch TV
  • TV + STB + AUDIO
• Listen To Music
  • TV + BL U+ AUDIO
• Watch Movie
  • TV + STREAM + AUDIO

If you want to use one of those combinations for your Activity, the next step is to check if you have the devices below:

DEVICE BRAND DIGITS

| TV| STB| STREAM| BLURAY| AUDIO
DIGIT| BRAND| BRAND| BRAND| BRAND| BRAND
1| Samsung| DirectTV| Apple| Samsung| Samsung
2| Sony| Dish Network| Xbox One| Sony| Vizio
3| LG| Verizon Frontier FiOS| Roku| LG| Yamaha
4| Panasonic| AT&T| | Vizio| Onkyo
5| Vizio| | | | Pioneer
6| TCL Roku| | | | LG
7| Insignia| | | |

If you have the right combination, just note the digit for each device.
For example, if you have a Sony TV, a DirecTV receiver, and an Onkyo Audio device like a sound bar, you can use the buttons 2, 1, and 4 to represent your combination and set up a Watch TV Activity for that combination.

1. Hold down the Activity key you want to set up until the LED blinks twice.
2. Enter the three digit code for your three devices (for example, 2, 1, and 4).
3.  The LED blinks twice and all three of your devices and the Watch TV Activity are now set up. From now on, the TV Device button will control a Sony TV, the STB Device button controls a DirecTV receiver and the Audio device button controls an Onkyo sound bar, and your Watch TV Activity combines all three of these.

You can repeat this for the Listen to Music and Watch Movie Activities, replacing the second digit with the brand of Blu-ray player or Streaming box, as long as they are listed above. If not, you should use the SimpleSet or Code Setup methods listed earlier.

Using the AV shift

The INPUT button selects the input on your TV (most TVs use a menu to select from a list of inputs). When the INPUT button is pressed in an Activity, the MENU
, , , , and OK buttons temporarily (for 10 seconds) control the TV. If the OK button is pressed, or no button is pressed for 10 seconds, these buttons revert to controlling the relevant device for the Activity (for example STB in the Watch TV Activity).

Using the power macro

If you press and hold the (power) button for two seconds in any Activity, your remote sends the power signal to each device within that Activity. For example, pressing the (power) button in the default setting for the Watch TV Activity turns both the TV and set top box on or off.

Troubleshooting

CAUTION: Do not try to repair your remote yourself. Doing so invalidates the warranty.

that your remote is programmed to your device.

•   Make sure that your remote is set to the correct mode (TV, STB, STREAM, AUDIO, AUX, or BLURAY).

I have tried all of the codes for my device’s brand, but none of them work.| See Setup method 2 – device codes on page 11.
After| If you still have your original (working)
programming,| remote, you can teach your new remote
some of my| its functions. See Setup method 3 –
remote’s functions don’t work| function learning on page 11.

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>