DAKOTA MICRO DMAC-JD2COC AgCam High Definition Quad Monitor Two Camera System User Manual

User Manual DMAC-JD2COC
User Manual
AgCam®/EnduraCam®/RazerCam™ Camera to John Deere CommandView II Cab
Adapter Cable 

Cable Specifications

Description| This adapter cable allows for the input of two (2) AgCam®/EnduraCam®/RazerCam™ cameras into the John Deere CommandView II Cab.
---|---
Part Number| DMAC-JD2COC
Cable Length| 79 Inches
Compatible Monitors| CommandView II Cab
Compatible Cameras| AgCam®, EnduraCam®, RazerCam™
Monitor Inputs| 1
Camera Inputs| 2
CVBS or AHD Compatible| CVBS
NTSC or PAL Compatible| NTSC or PAL
Warranty Period| 1 Year

*Check the equipment’s user manual for the video capabilities (CVBS/AHD or NTSC/PAL) with the display
Cable Connectors
A. 6-Pin Male Deutsch Connector for pre-wired JD CommandView II Cabs (to Monitor)
B. (2) 5-Pin Female Switchcraft Connectors (to Camera)

Installation Instructions

1. Locate the Video Input Port. In the pre-wired cabs, the port is labeled “Video Camera Only.” **
2. Plug Part A into the Video Input Port.
3. Plug Part B into the Camera Cables.

See your equipment’s user manual for the exact location of camera connection ports.
Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions.
**

Consumer Limited Warranty

Subject to the disclaimer, limitations and other directions stated hereafter, Dakota Micro, Inc. warrants that the Product will be free from defects in material and workmanship for periods as stated hereafter from the date of original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS. THE EXCLUSIVE REMEDY OF THE BUYER IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT. EXCEPT AS STATED IN THIS WARRANTY, DAKOTA MICRO, INC. SHALL NOT BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY OF ANY OTHER LEGAL THEORY. Any oral statements or representations made by anyone which are contrary to or at variance with the terms stated in this LIMITED WARRANTY are void.

Dakota Micro, Inc. will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period of three (3) years for AgCam® /EnduraCam® and InnoPro® cameras; two (2) years for  AgCam®/ EnduraCam® monitors, and Wireless components; Twelve (12) Months for all Overview® and RazerCam™ Cameras & Monitors, cables and all other accessories. The Dakota Micro, Inc. limited warranty periods outlined above apply throughout the United States and Canada only. A one (1) year maximum limited warranty for all Products applies to all other geographic locations unless otherwise stated in writing by Dakota Micro, Inc.

This limited warranty does not apply to any issues connected with an appearance that has no relation to the performance of the Product nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or another misuse, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the process set forth in the Product Warranty/Repair Process, and provide proof of purchase to Dakota Micro, Inc.

Neither the sales personnel of Dakota Micro, Inc. nor any dealer or any other person is authorized to make any warranties other than those described herein or to extend the duration of any warranties beyond the time periods described herein.

The warranties described herein shall be the sole and exclusive warranties and remedies provided by Dakota Micro, Inc. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Dakota Micro, Inc. to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims. In no event shall Dakota Micro, Inc. be liable or in any way responsible for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than Dakota Micro, Inc.
Some states do not allow the limitation or exclusion of incidental or consequential damages, so said limitation may not apply to you.
Any action at law, suit in equity, or another judicial proceeding for the enforcement of any right provided for herein or otherwise, or with respect to any claim that a purchaser may have against Dakota Micro, Inc. shall be instituted only in the Courts of the State of North Dakota, either in the state district court located in Wahpeton, North Dakota or in Federal District Court located in Fargo, North Dakota. Without regard to conflicts of law principles, the laws of the state of North Dakota shall govern the interpretation and enforcement of the terms of this Limited Warranty and all aspects of the relationship between Dakota Micro, Inc., and the purchaser.
This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state.

8659 148½ Ave. SE.
Cayuga, ND 58013
www.dakotamicro.com
Home of CAN WE BREAK IT®
Management System Registered to ISO 9001
Author: CNR Revised by: SJE Revision Date: 06/02/22 Page 2 of 2

Documents / Resources

| DAKOTA MICRO DMAC-JD2COC AgCam High Definition Quad Monitor Two Camera System [pdf] User Manual
DMAC-JD2COC, AgCam High Definition Quad Monitor Two Camera System, DMAC-JD2COC AgCam High Definition Quad Monitor Two Camera System, High Definition Quad Monitor Two Camera System, Definition Quad Monitor Two Camera System, Quad Monitor Two Camera System, Monitor Two Camera System, Two Camera System, Camera System
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>