ZEBRONICS ZEB BT7500RUCF Tower Speaker User Manual

: June 5, 2024
: ZEBRONICS

Table of Contents

ZEBRONICS ZEB BT7500RUCF Tower Speaker
Features
Utility Description
Package contents
How to use the BT
Front Panel Description
Remote Control Description
Speakers Connectivity Diagram
Side Panel & Microphone Description
Features
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZEBRONICS ZEB BT7500RUCF Tower Speaker

Features

With a built-in amplifier design, the speaker reflects the purity of Sound and creates a powerful sound effect.
Ideal for PC and audio sources such as CD, DVD, Bluray, TV, etc.
Magnetically shielded for use with PC monitor and TV without any interference.
Dedicated volume, treble, bass controls, plug-and-play microphone ports

Note:

Don’t put the speakers in a high temperature or humid environment, avoiding water and preventing electric shock.
Don’t open the speakers to avoid electric shock or other accidents.
In case of any liquid falls into the speakers, cut off the power immediately and contact the nearby authorized service center.
When receiving the high output signal from any audio sources (SD, USB, AUX, FM) don’t turn the volume to maximum to avoid sound distortion.
For indoor use only.
Plug off the power plug in case of no utility for a long period of time.

Utility Description

Connect the one end of the right tower cable to the right output port on the back panel of the left tower. Also, place the cable extended tower to the right side and the other to the left side while listening.
Connect one end of a 3.5mm stereo audio plug to the audio output of a PC or other audio sources.
Make sure all the cables above are connected correctly, then connect the power cord to AC power.
Switch on the power with the red led display showing(—–), then press the power button either on the remote or left speaker front panel.
The SB model in the mic represents the standby mode which works when the mic is to be stopped for a few seconds or minutes without being switched off.

Package contents

Tower speaker: 2 U
Remote control: 1 U
Wireless Mic: 2 U
Input cable: 2 U
Antenna cable: 1 U
QR Code Guide: 1 U

How to use the BT

Select the audio input to BT status
Search BT device with the name “ZEB-BT7500RUCF”
Connect the BT
If your BT device is below the 2.0 version, input the password “0000” when connecting.

Front Panel Description

VOL-/CH
Moves to the previous track for play if in USB or SD or BT mode moves to the previous channel if in the FM mode / decreases the volume level if pressed and held continuously.

AUTO
During FM playback press and hold for 2-3 sec to start an auto scan for FM channels / Play or pause a currently playing track.

VOL+ /CH+l ►
Moves to the next track in USB or SD or BT mode and moves to the next channel in the FM mode/Pressed continuously will increase the volume level.

EQ
When USB/SD input, pressing the button will change the various available equalizer modes.

INPUT
Pressing it enables to switch between different audio sources FM, SD, USB, BT &AUX.

STANDBY
Pressing it will put the speaker’s state to standby (or) during standby mode, Pressing it will enable the speaker to an active state.

SD/M MC CARD
SD/MMC card slot

U DISK
USB socket

Remote Control Description

ZEBRONICS-ZEB-BT7500RUCF-Tower-Speaker-
fig-2

Power switch button(standby) switch On or off for waiting or On condition.
USB USB input
SD SD Input
FM FM Input
AUX AUX Input
BT BT Input
EQ Equalizer preset
Play & pause
Previous track when USB/SD/BT Input;
Rewind
Next track when USB/SD/BT Input
Fast forward
VOL-/+ Master Volume
DISP Lightness Adjust
REPEAT Repeat
TUNE-/+ Previous/Next Channel Keep Pressing to search the channel
CH-/+ Previous /Next Channel When FM Input
AUTO Keep Pressing For FM Channel
S AVE Save FM Channel
RESET When The Volume Is at The Maximum,Press the “RESET” Button at The Status While Power On
MUTE Mute
Press any key to choose the track