USBBluetoothConnect Bluetooth Adaptor Box 3 Instruction Manual
- June 12, 2024
- USBBluetoothConnect
Table of Contents
USB-Connect Bluetooth Adaptor Box 3 Instruction Manual
Before making any setting changes, installing or servicing this boiler, follow all instructions including DANGER, WARNING, CAUTION, and NOTICE hazard notifications found in boiler Installation, Operating and Service Instructions provided with boiler and available through USB Connect app.
NOTICE: Only use the Bluetooth Adaptor while on site. Never leave the Bluetooth Adaptor on site and connected to boiler.
Need help or have a question?
Contact Customer Support at
717-397-4705
111679-03 – 6/23
Introduction
USB-Connect is a commissioning, diagnostic and service tool consisting of a Bluetooth Adaptor and mobile device app. The app communicates with any U.S. Boiler condensing boiler. USB-Connect is a local service tool with portal data collection and live streaming to enable remote support.
Included with the Bluetooth Adaptor:
Compatible Devices:
Apple device, an iPhone or iPad, running iOS version 13 or newer.
Android device, mobile phone or tablet, running Android version 10 or newer.
Compatible Boilers:
Alpine, Alta, AltaC, Aspen, AspenC, K2WT, K2WTC, K2FT, XC.
USB-Connect Features:
- Bluetooth Adaptor connects boiler to USB-Connect App.
- English and Spanish Language.
- Start-up, Troubleshoot and Service Wizards.
- Data logs, Service & status reports sent to cloud.
- Alta Boiler Control firmware updates.
Portal Features:
- Stores reports, data logs, site photos and alarm history.
- Real-time remote monitoring when signal available.
Getting Started
Step 1: Install App
Step 2: Create User Account
Step 3: Connect Bluetooth Adaptor
Step 4: Using App
Launch App
Before opening the App, connect Bluetooth Adaptor and wait for LED light to
turn solid green.
Demo Mode
When not near a boiler or Bluetooth Adaptor a user may view an Alta Boiler
Demonstrator Mode to review available options, manuals, and alarm
descriptions.
If having trouble connecting, see Appendix , Specification for Bluetooth Adaptor LED blink codes and Troubleshooting Tips.
Step 5: Sign into USB-Connect Web Portal
After you have completed your profile using the USB-Connect App, U.S. Boiler customer service will send you an invitation to sign into the web portal where you can view status, service reports and live data when a cell signal is available.
If you do not receive an invitation email, call customer service at 717-397-4701.
Monitoring
On Site
Home screen provides water temperatures supplied to and returning from heating elements and faucets. At a glance the user is aware of the current demands and burner status. Additional information is available from Main Data, Controller Status, Input/Output Status, as well as Zone Panel Status and Sequencer Status when used.
Remote Support
App offers reports, site photos and data logging to document boiler performance and aid remote support. Reports, site photos, and logs may be email and/or stored on devices as pdf or csv files. All files are archived at portal.
Commissioning/Setup
Start Up Wizard is provided to walk users through most common setup
tasks.
Start-up Wizard collects instructions, status, and key parameter adjustment
together to allow required actions to be as easy and successful as possible.
Adjust menus provide opportunity to adjust advanced settings. Each setting is provided with adjustable range and detailed explanation.
Troubleshooting
Troubleshooting Wizard is provided to walk users through solving common
issues.
Troubleshooting Wizard collects instructions, status, and key parameter
adjustment together to allow contractors to investigate efficiently, step by
step.
Active Alarm provide detailed explanation, possible cause and solution to every alarm.
Service
Service Wizard is provided to walk users through most common service
tasks.
Service Wizard provides instructions to allow required actions to be as easy
and successful completed.
Resources
Manuals are provided to ensure the user always has complete and the
latest information.
Note: Download the manual to ensure it is available when there is no cell
service and to enable zooming.
Bluetooth Adaptor Update
When new Bluetooth Adaptor firmware versions are available, the user will be alerted with an option to download the new firmware. Select “Ok” and allow the firmware download to complete. After download is complete disconnect and then reconnect Bluetooth Adaptor power and close App and reopen once Bluetooth Adaptor LED is solid green.
New Bluetooth Adaptor Firmware Update Indication
Alta Control Updates
The latest Alta Controller firmware and default parameters are made available to the App. When necessary Alta Controller Firmware or default parameters may be downloaded in the field.
Appendix
Specifications
Power
24 VDC via DC Barrel Jack:
- Power supply: AC 100-240V, 50/60Hz input, DC 24V 0.3A output
24 VDC via RJ12:
- Power supply: DC 24V 0.04A input
24 VAC via RJ45:
- Power supply: AC TBD input
Environmental and Regulatory:
- Model: USB-Connect
- Hardware Version: E2
- Environmental protection: IP10 (Nema 1)
- Flammability: UL94-V0
- Working humidity range: 0-95% (non-condensing)
- Working temperature range: -50oF – 104oF (10oC to 40oC)
Bluetooth Adaptor Blink Codes – Initial Power Up
For example: “Green-Blue” Modbus and Bluetooth communicating.
FCC Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
IC Statement
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Repair Parts
- USB-Connect Bluetooth Adaptor Kit—————————————————US Boiler P/N: 111667-01 US-Connect Bluetooth Adaptor (Portable Tool, Connects USB-Connect App and Portal to: Alpine, Alta, AltaC, Aspen, AspenC, K2WT, K2WTC, K2FT, XC.); Carry case, information card; CST Sage Controller J3 Terminals to RJ45 Interface Board (111640-01); Cable 1, RJ12 Straight Cable; Cable 2, RJ45 Split Cable; Cable 3, RJ45 Straight Cable.
- Connected Service Tool Sage J3 Terminals to RJ45 Interface Board——–US Boiler P/N: 111640-01 Connected Service Tool Interface Board, used to connect Sage Controller J3 screw terminals to Bluetooth Adaptor or Remote Monitoring System using an ethernet cable.
- Cable 1, RJ12 Straight Cable———————————————————–Show Me Cables P/N: 15-302-003S Standard RJ12 Line Cord, 24AWG, stranded copper conductors, 6 conductors, straight through, PVC jacket, Silver, Standard Boot, 36-inch length.
- Cable 2, RJ45 Split Cable—————————————————————-US Boiler P/N: 111662-01 Custom cable has two RJ45 connections on one end and single RJ45 on opposite end. Used to connect Bluetooth Adaptor to Sage equipped boiler’s Boiler to Boiler and Enviracom RJ45 connections, Black, Standard Boots, 24-inch length.
- Cable 3, RJ45 Straight Cable————————————————————Show Me Cables P/N: 530-03 BL Standard Cat5e Ethernet Patch Cable, 24AWG, stranded copper conductors, 8 conductors, straight through, PVC jacket, Blue, Standard Boot, 36-inch length.
Troubleshooting Tips
Documents / Resources
|
USBBluetoothConnect Bluetooth Adaptor Box
3
[pdf] Instruction Manual
CST111639, 2A9E3-CST111639, 2A9E3CST111639, Bluetooth Adaptor Box 3, Bluetooth
Adaptor, Box 3
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>