J R Brothers SDG10 Starry Sky Projection Lamp User Manual
- June 5, 2024
- J R Brothers
Table of Contents
J R Brothers SDG10 Starry Sky Projection Lamp
PRODUCT SPECIFICATIONS
- Product name: Starry sky projection lamp
- Product model: SDG10
- Voltage: USB Cable
- Power: 3w 2
- Product material: ABS plastic
- Power supply mode: USB DCSV/ 2A(lithium battery)
- Maximum LED power: 4W
- Laser light power: 0.2W
- Operating temperature: 14F104F (-10 c40°c)
- Projection coverage: 161 538 square feet (15 50)
- Product size : 16 16 11 CM( top diameter bottom diameter height)
- Product Net Weight:523g(18ounce)
CHECKLIST AND NOTES
- USB cable x1
- remote control x1
- User’s manual x1
- Starry projector light x1
FEATURES
- Rich lighting colors, colors can be matched freely.
- The laser is clearer and the projection area is larger. The projection distance is 30m, and the projection area is 40m.
- With remote control, more convenient, remote control distance of 3-5m
- Bluetooth 5.0 connection, instantly connects to any iPhone & Android device, also tablets, laptops, or any device that supports Bluetooth.
- Complete certificates, Fcc.UKCA, UL
- Enhance the light protection cover, safe and durable.
- USB powered, can be used everywhere.
- Unique and beautiful appearance, with appearance patent.
- After charging, it can be used for 4-6 hours, with large battery capacity (2000mA).
- High-Quality Audio, Built-in high-quality speakers, will play any music from your device!
HOST INSTRUCTIONS
- Insert U disk can play music
- Remote control receiver position
- USB chargine position, DCSV 1A
- Power switch position
- LED mode change
- Volume down/previous song
- Volume up /next song
- Laser light mode change
- Pause/play
REMOTE CONTROL FOR USE
PRODUCT APPEARANCE
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.