Niko PM360 dimmer switch KNX User Manual
- June 5, 2024
- niko
Table of Contents
**Niko dimmer switch, KNX ®
360-31001
User Manual
Installation
A
Option 1
Option 2
Option 3
Dismantling
Configuration
Consult the online Niko manual (www.niko.eu/article/ 360-31001) for more information about the configuration.
Radio planning guide
As a rule of thumb, try to achieve a direct line of sight between the Niko dimmer switch and the KNX ® media coupler. If this is not possible, and there are one or more walls between the devices, the RF signal should penetrate the wall(s) as straight as possible. We recommend using a KNX ® diagnostics tool to determine the optimal indoor mounting position. When the radio coverage is not sufficient, try relocating the Niko dimmer switch or using a KNX ® RF repeater. Consult the online Niko manual (www.niko.eu/article/360-31001) for more information about radio planning.
Specifications
Article number 360-31001
Power supply integrated kinetic energy harvester
The operating force is typically 10 N (at room temperature)
RF protocol KNX ® RF1.R S-Mode
Modulation / Data rate Frequency-Shift Keying (FSK) / up to 16.384 Kbps
Configuration ETS5 software
Mounting method wall mounting
Mounting height of 110 cm
Weight 22 g ±1 g
Temperature (storage / operating) -20 °C – +45 °C*
Dimensions with Niko Original or Niko Pure face plate (HxWxD) 83 x 83 x
15 mm
Dimensions with Niko Intense faceplate (HxWxD) 85 x 85 x 15 mm
Protection degree IP20
Operating frequency 868.3 MHz
Antenna integrated antenna
Maximum range (indoor) up to 30 m
Maximum RF power -2 dBm / 0.63 mW
Mar king** CE
- The maximum temperature difference between the Niko dimmer switch and a receiver should not exceed 40 °C
** Depends on the indoor environment. Consult § Radio planning guide in this manual.
Troubleshooting
Consult the online Niko manual (www.niko.eu/article/360-31001) for troubleshooting.
Warnings regarding installation
The installation of products that will permanently be part of the electrical installation and which include dangerous voltages should be carried out by a qualified installer and in accordance with the applicable regulations. This user manual must be presented to the user. It should be included in the electrical installation file and it should be passed on to any new owners. Additional copies are available on the Niko website or via Niko customer services.
CE marking
This product complies with all of the relevant European guidelines and
regulations. For radio equipment, Niko LLC declares that the radio equipment
in this manual conforms with the 2014/53/EU directive.
The full text of the EU declaration of conformity is available at
www.niko.eu under the product reference, if applicable.
Environment
This product and/or the batteries provided cannot be disposed of in the non- recyclable waste. Take your discarded product to a recognized collection point. Just like producers and importers, you too play an important role in the promotion of sorting, recycling, and reuse of discarded electrical and electronic equipment. To finance rubbish collection and waste treatment, the government levies recycling charges in certain cases (included in the price of this product).
Support & contact
Niko prepares its manuals with the greatest care and strives to make them as
complete, correct and up-to-date as possible.
Nevertheless, some deficiencies may subsist. Niko cannot be held responsible
for this, other than within the legal limits. Please inform us of any
deficiencies in the manuals by contacting Niko customer services at
support@niko.eu.
NV Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80
support@niko.eu
PM360-31001R22042
References
- Niko - home automation, switches, socket outlets and detector
- Niko - home automation, switches, socket outlets and detector
- Niko - home automation, switches, socket outlets and detector
- Products
- Mounting box for 360° presence detector, for surface mounting
- Niko dimmer switch, KNX®
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>