Black 4-Tier Heavy Duty Metal Freestanding Storage
User Manual

Note

Please dispose of loose, round plastic pieces. These are used to separate the shelves for shipping purposes.

Caution Warnings

1. Two adults are recommended for ease of assembly. Use care when handling.
2. Do not allow children to climb or play in or around the shelves.
3. Assembly is recommended on a soft surface, such as carpet, to avoid scratching flooring finish.
4. Each shelf holds up to 350 lbs. evenly distributed.

Specifications

Helpful Hints

1. Carefully read all instructions and caution warnings before beginning assembly.
2. Determine shelving heights prior to assembly to avoid dismantling for adjustment.
3. When placing the plastic tapered sleeves onto the posts (step 2-ii), slide the tapered sleeves up or down on the post until you feel it “snap” into the lines or grooves of the post.

Accessory Parts List

| (32) plastic tapered sleeves (2) replacements| | (8) posts (with 4 threaded post jointers pre-installed in posts,
4-foot levelers pre- installed at the bottom of posts)|
---|---|---|---|---

Assembly

Step 1: Post Assembly
i. The top post section has a plastic endcap on one end and the bottom post has a foot leveler attached. Threaded post jointers are pre-installed for your convenience. Screw the posts (1 long & short) tightly together. (See Diagram

1)

Step 2: Bottom Shelf Assembly
i. Locate the desired position of the bottom shelf.
ii. Insert four plastic tapered sleeves into the appropriate post groove, one in each post. Ensure the tapered end is up. See arrow on lock. (See Diagram

2)

iii. Place the shelf on its side and slide each post with tapered sleeves through the bottom of the shelf until snug. (See Diagram #3)
iv. After all posts are in place, position the unit in the upright position.
v. Push down on each corner of the shelf, ensuring that the shelf is in a fully locked position.

Step 3: Additional Shelves Assembly (See Diagram #4)
i. Locate the desired position of the next lowest shelf and insert the tapered sleeves into the posts.
ii. Slide the shelf down from the top of the posts and onto the tapered sleeves. Push down on each shelf corner, ensuring that the shelf is in a fully locked position.
iii. Repeat for the remaining shelves.

Step 4: Adjust the foot levelers in or out at the bottom of the posts to attain proper leveling. (See Diagram #5)

NOTE: The tapered sleeves must be at the same height for each pole to ensure the shelf sits on the sleeves levelly.
NOTE: The post has a groove with a double-line marking. It can help to identify the height of the tapered sleeve in each post.

HOMEDEPOT.COM
Please contact 888-449-5520 for further assistance

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>