WINN A03 Manual Filling Machine User Manual

: June 5, 2024
: WINN

Table of Contents

use
technical parameters
instructions
Fault and elimination method
schemes
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MODEL： A03
manual filling machine
Operational Manual
Before operation, please read this Operational manual carefully

use

Using piston structure can be in liquid materials such as paste, 5-50g quantitative filling machine, compact structure, convenient operation, precise and body parts contacting materials adopt 304 stainless steel and ptfe through, abrasion resistance, corrosion resistance, etc. Especially suitable for small and medium-sized enterprises or the chemical industry department of the pharmaceutical preparation in hospitals, laboratory of small doses of filling.

technical parameters

Filling range：5-50g
Filling accuracy：±1%
Working way: manual
Hopper volume：10KG
Shape dimension：270×270×710mm
weight：13KG

instructions

Users must according to the need for filling capacity Settings, the first “handle” up to the highest level, loosen “adjust on the screw solid nut” later, turn the “raised the amount screw”, clockwise rotation to be filling the quantity increases, counter-clockwise decreases, when adjustment after the capacity, will “adjust on the screw solid nut”
tighten.
Operation method：
Every time under pressure “handle”, and the material will be from “the material mouth” out, loosen “handle” waiting for the next again after filling, each time the pressure must be close to the lowest point, and low pressure to loosen up “handle”, also want to return to the highest level, so every time filling quantity will not have the error. Such as press “handle” no pressure to low or the handle when up to the highest level did not return can appear every time filling quantity to different situations, users in the operation should be paid attention to the method of operation.
The machine maintenance and maintenance：
When the material is used alternately or for long-term work, we should take the hopper even material cylinder, cone cover, four fluorine pistons, discharging mouth, spring, discharging valve core of mouth out clean reload after the good. As the piston rod bottom appears discharge, cream, to replace the cylinder an oil seal.
note：
(1) the machine doesn’t fit to take particles and illiquid materials filling.
(2) the machine shell by the casting of aluminum alloy, the body needs to keep clean, to prevent corrosion.
(3) in the process of operation to bushings, bevel gears, and rack appropriate add lubricating oil.
(4) long-term when not working for the material to contact parts of the overall unpick and wash, in case the material solidified inside the machine.
(5) the machine when acceptance for inspection, in normal transportation and packing sound, such as the discovery of the parts of the products and the packing list should be prompt to the factory not contact.
(6) the equipment transportation and storage and use in can’t hit, the stress and spur of damp.

Fault and elimination method

Fault phenomena| Fault reason|

Elimination method

---|---|---
Measuring forbids, In less time.| Cover and the four fluorine cone piston materials stuck between the sealing ring, lead to the material flow back, affecting measurement accuracy.| Unpick and wash
Four fluorine pistons wear excessive and lose tension and friction.| Replace four fluorine piston
The filling speed is quick and slow, causing the uneven absorb charge.| Keep the speed of work uniform.
Cream product’s viscosity is too large, leading to poor material flow.| Will lift the handle action slowed
Cut and cap on the amount is loose.| Lock the quantity and cap
The material mouth had drops liquid phenomenon| The core of the o-rings was melted material or damage| Replacement o-rings
Materials glued to the o-rings, but make the material suction excessive, and destroy the material mouth surface tension.| Unpick and wash
After filling materials mixed in the bubble| Filling too fast| Reduce the filling speed,
Cylinder of oil seal failure within cities| Replacement cylinder an oil seal