Rosenbauer F10 Emergency Gloves Instruction Manual

Rosenbauer F10 Emergency Gloves

Product Information

• Specifications:
  • Brand: GLOROS
  • Model: F10
  • Standards: EN 388:2016, EN 407:2020, ISO 16073-4:2019
  • Materials: Modacrylic fibers, cowhide leather, nylon fiberglass

Product Usage Instructions

• Storage:
  • The gloves should be stored in a dry and clean place away from direct sunlight and moisture to prevent damage.
• Cleaning and Care:
  • Handwashing is recommended, and machine washing is possible. Avoid using solvents, bleaches, or oxidizing agents.
• Material Composition:
  • Outer Layer:
  • Backhand of flame retardant modacrylic fibers
  • Inner hand made of resistant cowhide leather with additional reinforcement between thumb and index finger
  • Elastic cuff for protection against cut glass and debris
  • Inner Lining:
  • Comfort fleece lining on the backhand
  • Cut-resistant lining made of nylon fiber glass on the back and inner hand
  • Sizes Available:
  • XXXS, XXS, XS, S, M, L, XL, XXL, XXXL
  • Conformity Declaration:
  • The GLOROS F10 gloves conform to Regulation (EU) 2016/425 on personal protective equipment (PPE) and comply with the relevant standards.

FAQs

• Q: Can the gloves be machine-washed?
  • A: Yes, machine washing is possible. However, avoid using solvents, bleaches, or oxidizing agents.
• Q: How should I store the gloves?
  • A: Store the gloves in a dry and clean place away from direct sunlight and moisture to prevent damage.
• Q: What are the materials used in the gloves?
  • A: The gloves are made of modacrylic fibers, cowhide leather, and nylon fiberglass for cut resistance.

USER INFORMATION WILDFIRE

USER INFORMATION WILDFIRE GLOVE GLOROS F10

• Approved in accordance with EN 388:2016 + EN 407:2020 + ISO 16073-4:2019

You have made an excellent choice!

• Congratulations on your purchase of quality gloves from Rosenbauer.
• Premium quality, hand-picked materials combined with state-of-the-art design, crafted with the utmost of care, guarantee protection and perfect wearing comfort for professional fire fighters.

USE

• The contractually guaranteed scope of protection of the respective personal protective equipment results from the relevant provisions of the PPE Regulation (EU) 2016/425 and the standards derived from it by the declaration of conformity.
• Any further protection does not exist. Additional dangers such as chemical, biological, electrical or radioactive hazards must be covered by another and/or additional protective equipment.
• At this point, we would like to point out that the user of this PPE must carry out a risk assessment before use.
• The user determines through this risk assessment what risk he will have to expect in his operations. The real risk arises from the extent to which various hazards are likely about the severity of the consequences for the user in such an exposure.
• The resulting risk assessment is the basis for the selection and application of adequate protective equipment (with the appropriate protection level if applicable).
• Please make sure that your Rosenbauer PPE meets the requirements of your risk assessment about the contractually guaranteed protective effect.
• The wildfire gloves are part of the protective clothing. They can be used for fire fighting in the open field.

Pictograms and performance levels

• Abrasion resistance – EN 388 3
• Cut resistance – EN 388 4
• Tear resistance – EN 388 3
• Puncture resistance – EN 388 3
• Cut resistance (ISO) – EN 388 C
• Dexterity – EN 420 4
• Limited flame spread EN 407 4
• Contact heat resistance – EN 407 1

The performance levels were confirmed after 5 washing cycles (40 °C).

Testing and certification body

• Institute for Ecology, Technology and Innovation GmbH (ID-No.: 0534); Certificate no.: VN620 227461

LIMITATIONS TO USE

• The glove should be checked for damage following subjection to high mechanical, chemical, or thermal loads.
• Penetrative abrasion or surface damage due to heat, chemicals, etc. can hurt protection levels.
• Protective gloves showing such, or similar, damage must be discarded.
• These gloves do not offer protection against chemical, bacteriological, electrical, or thermal hazards (except contact heat up to 100 °C over 15 seconds according to EN407).
• Do not use it when working with rotating parts. Damaged gloves reduce the protective properties of the gloves and must be replaced.

STORAGE

• The gloves should be stored in a dry and clean environment.
• Direct sunlight and humidity should be avoided.

CLEANING/CARE

• Hand washing is recommended/ Mashinewasching is possible!
• Attention! Do not use solvents, bleaches, or oxidizing agents!

MATERIAL COMPOSITION

OUTER LAYER

• Backhand of flame retardent modacrylic fibers.
• The inner hand is made of resistant cowhide leather with an additional reinforcement between the thumb and the index finger.
• Elastic cuff keeps out the cut glass and general debris.

INNER LINING

• Comfort fleece lining on the backhand.
• Cut resistant lining out of nylon fiber glass on the back and inner hand.

SIZES

• The wildfire gloves are available in the following sizes:

CONFORMITY DECLARATION

The subject of the declaration is the following personal protective equipment (PPE):

• GLOROS F10 Art. No.: 142610
• The manufacturer: Rosenbauer International AG Paschingerstraße 90 4060 Leonding / AUSTRIA

This statement is issued under the sole responsibility of the manufacturer. The subject of the declaration (PPE described above) complies with the relevant Union harmonisation legislation: Regulation (EU) 2016/425 personal protective equipment

Conformity is achieved by complying with the applicable requirements of the following documents:

• EN 388:2016 Protective gloves against mechanical risks
• EN 407:2020 Protective gloves against thermal risks (contact heat)
• ISO 16073-4:2019 Wildland firefighting personal protective equipment

The notified body ÖTI – Institute for Ecology, Technology and Innovation GmbH (ID-No.: 0534) A-1230 Wien, Siebenhirtenstrasse 12A, Objekt 8 has carried out the EU type-examination (module B) and issued the EU type examination certificate no. VN620 227461. The PPE is subject to the following conformity assessment procedure: For category III: Conformity with the model based on internal production control with supervised product checks at irregular intervals (module C2) under the surveillance of the notified body ÖTI – Institute for Ecology, Technology, and Innovation, ID-No: 0534

Signed for the manufacturer / Place and date of issue

Leonding, 1.10.2023

CONTACT

• Rosenbauer International AG
• Paschinger Straße 90
• 4060 Leonding, Austria
• Tel.: +43 732 6794-0
• Fax: +43 732 6794 -77
• office@rosenbauer.com.
• www.rosenbauer.com.

Text and illustrations are not binding. The illustrations may show optional extras only available at an extra charge. ROSENBAUER retains the right to alter specifications and dimensions given herein without prior notice.
VI1415/GLOROS F10_DE_EN_2024_01_231347 Rosenbauer – GLOROS F10

References

• Feuerwehrfahrzeuge | Feuerwehrfahrzeughersteller - Rosenbauer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>