Jabra Revo Wireless Headphones User Manual
- June 16, 2024
- Jabra
Table of Contents
Jabra Revo Wireless Headphones
Specifications
-
Bluetooth profiles: Hands-Free (HFP), Headset (HSP), Advanced
Audio Distribution Profile (A2DP) -
Wireless range: Up to 10 meters
-
Battery life: Up to 12 hours of music playback
-
Charging time: Approximately 2 hours
-
Weight: 240 grams
Product Usage Instructions
Pairing with a Mobile Device
- Ensure that your Jabra Revo Wireless headphones are charged.
- Turn on the headphones by pressing and holding the power button until the LED light flashes blue.
- Activate Bluetooth on your mobile device and search for available devices.
- Select “Jabra Revo Wireless” from the list of available devices.
- If prompted, enter the PIN code “0000” to pair the headphones with your mobile device.
Pairing with a Computer or Softphone
A Jabra Bluetooth device is primarily designed for use with mobile devices,
but it is possible to pair it with a computer or softphone client. However,
please note that the full functionality of the Jabra device may not be
available in this case. If you still wish to pair your Jabra Revo Wireless
headphones with a computer or softphone, make sure that the device meets the
following requirements:
- Supports the Hands-Free (HFP) or Headset (HSP) Bluetooth profile
- Supports the Advanced Audio Distribution Profile (A2DP) Bluetooth profile
- Ensure that all devices, including your Jabra device, have the latest firmware/software updates installed.
Pairing Steps
- Ensure that Bluetooth is enabled on your computer.
- Remove any previous pairings between your Jabra device and the computer.
- Reset your Jabra Bluetooth device by following the instructions in the user manual.
- Install the latest version of the softphone client on your computer.
- Select your Jabra device as the audio device on both your computer and the softphone client settings.
Frequently Asked Questions (FAQ)
Can I pair my Jabra Bluetooth device with a computer or softphone?
A Jabra Bluetooth device can be paired with a computer or softphone client,
but please note that the full functionality may not be available. Ensure that
your devices meet the requirements mentioned in the user manual and follow the
pairing steps provided.
What should I do if I face challenges when connected to a computer or
softphone client?
If you experience difficulties when connected to a computer or softphone
client, try the following troubleshooting steps:
- Check that the Bluetooth connection is active on your computer.
- Remove the previous pairing between your Jabra device and the computer, then re-pair them.
- Reset your Jabra Bluetooth device by following the instructions in the user manual.
- Ensure that you have the latest version of the softphone client installed on your computer.
- Make sure that your Jabra device is selected as the audio device both on your computer and the softphone client settings.
Can I pair my Jabra Bluetooth device with a computer or softphone?
A Jabra Bluetooth device is optimised for use with a mobile device such as a
smartphone or tablet. Some users may have success pairing a Jabra Bluetooth
device with a computer and then connecting to a softphone client such as
Microsoft Teams. However, the full functionality of the Jabra device may not
be available. For example, you may be able to send and receive audio, but the
buttons may not work for call controls the way they would with a mobile
device. If you do pair with a computer or unsupported device, note that it
must support the following:
- The Hands Free (HFP) or Headset (HSP) Bluetooth profile.
- The Advanced Audio Distribution Profile (A2DP) Bluetooth profile.
In addition, ensure that all devices, including your Jabra device, are up to date with the latest firmware/software. When pairing your Jabra Bluetooth device, follow the same steps that you would for pairing with a mobile device. To troubleshoot challenges when connected to a computer or softphone client, try the following steps:
- Check that the Bluetooth connection is active on the computer.
- Remove the previous pairing and re-pair.
- Reset your Jabra Bluetooth device.
- Ensure that you have the latest version of the softphone client installed.
- Ensure that your Jabra device is selected as the audio device on your computer and the softphone client.
- https://www.jabra.hk/supportpages/jabra-revo-wireless/100-96700000-37/faq/bOe77e3a-d177-43d4-a4ca-cb07b7582640