AUDIO SYSTEM SUBFRAME-R-10-FLAT-EVO2 SERIES User Manual
- June 5, 2024
- AUDIO SYSTEM
Table of Contents
SUBFRAME R10 FLAT ACTIVE EVO 2
SUBFRAME R10 FLAT ACTIVE-2 EVO 2
USER MANUAL
Thank you!
Congratulations on purchasing a high-quality
AUDIO SYSTEM product incl. GERMAN SOUND.
Important: Completely read this operating instruction before installation
and use of the device.
Attention: Pay attention to advise and instructions of the car
manufacturer. Check the polarity when connecting the speakers.
Important: You will need your purchase receipt as proof of purchase for
all warranty repairs and for insurance purposes. Keep your receipt, owner´s
manual, and packing materials in a safe location for possible future use.
Attention: Use of sound components can impair your ability to hear
necessary traffic sounds and may constitute a hazard while driving your
automobile. AUDIO SYSTEM GERMANY accepts no liability for hearing loss,
bodily injury, or property damage because of the use or misuse of our
products.
We recommend installing the equipment by an authorized service center or
dealer. A professional fitting and connection are the requirement for further
warranty and perfect sound.
Mechanical Installation Hints
Warning: First disconnect the negative pole of your car battery. Check
polarity-changing polarity may cause serious damage to your car electric. Best
speaker positions are the original build-in positions. Easy installation and
originality are the reasons.
Please note that the speakers are flat and stable. The quality of the
installation decides the sound very much, therefore, attention should be paid
to insulation and care during installation. Please note that the speakers are
protected from heat, sunlight, mechanical influences, moisture, and wetness by
accessories from AUDIO SYSTEM.
Attention: Lay all cables as straight as possible without squashing or
laying them over sharp edges. Otherwise, this can cause a short circuit or
damage to your whole installation. Attention: Be careful removing original
plastic parts of your car. The fitting parts could be damaged and must be
replaced. Important: The right polarity of all speakers is extremely important
for the sound of your car audio system. We recommend changing the polarity of
the subwoofer to find out the best possible sound. The best is to listen or
measure it.
Safety Tips
WARNING: Fasten the SUBFRAME securely in the vehicle with the SUBFRAME
MOUNTING KIT supplied!
ATTENTION: Please read this manual carefully and follow the instructions.
Specifications
SUBFRAME R10 FLAT-2 EVO 2
Geschlossene/Enclosure Box mit/with 2x R10 FLAT EVO
Leistung/Power: 800/600 Watt
Impedanz/Impedance: 2 Ohm
Maße/Size: 580mm / 135mm
Gewicht/Weight: 19,2 Kg
Gehäuse-Volumen/Volume: 14 Liter
SUBFRAME R10 FLAT-2 ACTIVE EVO 2
Geschlossene/Enclosure Box mit/with 2x R10 FLAT EVO und/and M-400.1 MD
Leistung/Power: 550/400 Watt
Impedanz/Impedance: 2 Ohm
Maße/Size: 580mm / 135mm
Gewicht/Weight: 19,8 Kg
Gehäuse-Volumen/Volume: 14 Liter
Connection (ACTIVE)
Attention: For the ACTIVE version please read the manual of the M400.1 MD or CO-220.1 amplifiers carefully and follow the instructions.
If you are using a separate amplifier, connect it to the existing terminal. Please note the polarity.
Package Content
- SUBFRAME MOUNTING KIT
- ACTIVE: M-400.1 MD or CO-220.1 including cable set
- Manual
Optional Mounting Accessories
- ALUBUTYL 1500, 2000 EVO, 3000 EVO, ALU 250 EVO
- Damping: DOORKIT 1.0 and DOORKIT 2.0
- Z-(T)SC 0.75, 1.5, 2.5, 4.0 OFC-Speaker-Cable
- MBR165 / MBR 200 Splash Protection Rings
www.audio-system.de
audio system germany – falltorstrasse 6 – 76707 hambrücken
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>