nave LISO 1287323 LED Instruction Manual
- June 3, 2024
- nave
Table of Contents
LISO 1287323 LED
Instruction Manual
LISO 1287323 LED
This product contains light sources of energy efficiency class “G”
900 lm / 3000 K / 19 W
220-240 V~ / 50 Hz
20.000h
IP20 / SKll
Safety instructions
Electrical connections may only be carried out by expert staff.
The manufacturers do not accept responsibility for injuries or defects caused
by improper use of a luminaire. The lamp is only for indoor use.
Attention!
Before beginning any work on the lamp, disconnect it from the mains power line
by removing the fuse or unplugging the power plug. This also applies to
cleaning and maintenance. Prior to starting installation work, de-energies the
power line –remove the fuse and/or set the switch to “OFF. Lamps with
transformers may be operated only with the original transformer.
Lamps are not toys!
Children frequently do not recognize the dangers associated with electric
appliances or their packaging. Therefore, you should keep them away from
children. If you give this lamp to someone else, always include these
instructions. If the lamp is damaged, in particular the cord or lamp socket,
discontinue the use of the lamp immediately. In the event of a malfunction,
always have the lamp repaired by a qualified electrician. Never attempt to
repair the lamp yourself. Improper repairs can endanger the safety of the
user.
Protection class II 
. This luminaire is particularly
isolated and must not be connected to a protective earth terminal.
Pay attention to the fact that electric lines are not damaged during
installation.
Risk of eye injury! Look never directly into the LED diodes of this light. The
LED cannot be replaced in the luminaire. The given mains voltage may not be
exceeded.
Plug and connection elements must be free of train and trick strengths.
Environmental protection
Dispose of the lamp at the collection points designated for electronic waste.
Nave Leuchten GmbH
Austra~e 5
D- 74670 Forchtenberg
www.naeve-leuchten.de