nave FUMOSO Pendant Lamp Instructions
- June 1, 2024
- nave
Table of Contents
nave FUMOSO Pendant Lamp
Product Specifications
- Input Voltage : 220-240V~
- Frequency : 50Hz
- Dimensions: 78cm x 10cm x 100-160cm
- Socket Type: 4x E14
- Maximum Wattage : 40W per bulb
Product Usage Instructions
Intended Use
The product is approved for use in all EU countries and is intended for indoor use in private households only. Do not connect the product to the mains when it is in its packaging. Before using the product, ensure it is suitable for your intended use.
Qualifications
Only qualified, skilled personnel should assemble and disassemble the product. Skilled personnel have the necessary training, knowledge, and experience to recognize and avoid electrical hazards
Safety
Complete the installation of the product before connecting to the mains. Use the mounting material provided for concrete ceilings or plastered masonry. For other mounting surfaces, use appropriate mounting material not supplied.
Warranty/Guarantee
Refer to the General Terms and Conditions on the manufacturer’s website for warranty information.
Scope of Delivery
- Operating instructions
- Lights
- Mounting material (screws/wall plugs)
- Tool
Installation
DANGER: Before starting any work, disconnect the mains voltage or mains plug. Ensure no hazards are present from conductive objects or media. Check that the electrical installation meets safety standards.
Cleaning and Care
DANGER: Disconnect the mains voltage or mains plug before cleaning. Avoid moisture entering connection compartments or live parts to prevent electric shock.
NOTE: Use a soft, dry cloth for cleaning. For tough stains, use a slightly damp cloth. Do not use solvents as they can damage the product.
FAQ
- Q : Can I use this product commercially?
- A: No, the product is intended for use in private households only and not for commercial purposes.
- Q : What should I do in case of optical defects?
- A : Contact customer support for assistance with optical defects.
OVERVIEW
FEATURED
Power
ON/OFF
Intended use
Other uses or modifications of the product are considered improper and can
lead to risks such as injury and damage. The manufacturer accepts no liability
for damage resulting from improper use.▪ The product is approved for use in
all EU countries.
- The product is intended for use indoors.
- The product is intended for use in private households only and not for commercial use.
- Do not connect the product to the mains when it is in its packaging.
- Before using the product, make sure that it is suitable for your intended use.
Qualifications
Only qualified, skilled personnel are allowed to assemble and disassemble this product.
- Skilled personnel have the appropriate professional training, knowledge and experience to recognise and avoid hazards that may be caused by electricity.
Safety
- Fully complete the installation of the product, before connecting to the mains.
- The mounting material supplied with various luminaires is intended for installation on a concrete ceiling or plastered masonry. For installation on a different mounting surface, choose different mounting materials accordingly (not supplied).
Warranty/Guarantee
Information on the warranty can be found in our General Terms and Conditions on the Internet at www.naeve.de.
Scope of delivery
- Operating instructions
- Lights
- Mounting material (screws/wall plugs)
- Tool
Installation
DANGER
Electric shock
- Disconnect the mains voltage or mains plug before starting work.
- Make sure that no hazards can be caused by electrically conductive objects or media.
- Make sure that the type of electrical installation does not reduce the protection against electric shock (protection class, protective insulation).
- Make sure that the cable is not bent excessively or crushed.
Non-compliance with these instructions will result in serious or fatal injury.
Cleaning and care
DANGER
Electric shock
- Disconnect the mains voltage or mains plug before starting work.
- Make sure that no moisture gets into connection compartments or on live parts.
Non-compliance with these instructions will result in serious or fatal injury.
NOTE
Damage to the product
- o not use any solvents for cleaning.
Non-compliance with this instruction can cause damage to property
- Use a soft, dry cloth for cleaning.
- In case of severe soiling, use a soft and slightly damp cloth to clean the product.
NOTE
Unsuitable parts
- Use original spare parts and accessories from the manufacturer only.
Non-compliance with this instruction can cause damage to property.
In case of complaint, contact your responsible specialist dealer or contact our service hotline directly.
- Telephone number: +49 (0)7947 9100-0
- E-mail : info@naeve.de
For technical questions, please state the seven-digit item number as well as the five-digit order number (for example 1234567 / 16999). The order number can be found on the type plate.
Visual complaints
This luminaire is handmade and made of blown glass and each luminaire is
therefore unique. Small deviations in colour, shape, size and structure may
therefore occur.
Disposal
Do not dispose of old appliances with household waste!
If the product can no longer be used, every consumer is legally obliged to
dispose of old appliances separately from household waste, e.g. at a
collection point in their municipality/district. This ensures that old
appliances are disposed of properly. Dispose of the product in accordance with
the applicable regulations, standards and safety instructions in your country.
- Disconnect the product from the power supply.
- Disassemble the product.
- Dispose of the product.
CONTACT
- Näve Leuchten GmbH
- Austraße 5 • D
- 74670 Forchtenbera
- www.naeve-leuchten.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>