Dan Clark Audio ART-2-1 Aeon RT Bluetooth Headphones User Guide
- June 5, 2024
- Dan Clark Audio
Table of Contents
Dan Clark Audio ART 2-1 Aeon RT Bluetooth Headphones
Features
- Driver: 62mm x 34mm Dan Clark Audio designed single ended planar magnetic.
- Titanium Memory Metal headband.
- Leather comfort strap.
- Synthetic leather ear pads.
- Matched drivers:+/- O.SdB between 100-?KHz
Safety Instructions
- Keep the headphone, accessories and packaging parts out of reach of pets and children.
- This product contains small parts which may present a choking hazard.
- Use only attachments, accessories, and spare parts supplied or recommended by Dan Clark Audio.
- Protect your hearing from high volume levels.
- Permanent hearing damage can occur when headphones are used at high volume levels for extended periods of time.
- Do not expose headphone or accessories to extreme temperatures.
- Always keep headphone dry.
Headphone Fit Adjustments
Adjust slider up or down on both left and right sides for proper fit.
You can adjust the fit of your heaphone by re-positioning the headband slider. To adjust the headband move the sliders up or down until you achieve your desired fit. It may benecessary to remove thick glasses or hats to achieve a proper seal between your head and ear pad. An improper fit cancause a bad seal resulting in poor bass response.
Tip
Try inserting the arms of your glasses into the top of the ear pad instead of
resting them directly on your ears.
Attaching a Cable
All Dan Clark Audio planar-magnetic products use Hirose-style connectors. To attach your cable, hold the male connector by the boot and rotate it into the female receptacle on the headphone until you feel it click into place. To release the cable, pull down on the top of the connector’s metal jacket.
Product Care
- The synthetic leather ear pads may be cleaned gently with a moistened cloth.
- Do not use cleaners or protectants, this may damage the pad.
- Clean any other surfaces with a clean, dry, and lint-free microfiber cloth.
- For the first 50-100 hours of use the headphone will ‘burn-in; during this time the sounds will stabalize.
Replacing Ear Pads
This headphone is equipped with our peelable ear pad technology so the pads may be easily removed and swapped for other ear pads to achieve different fitment or sound signatures. To remove the pad gently lift the point above the cable jack until it detaches and peel off the baffle. Store unused ear pads on a clean and flat surface or using waxed paper. If the ear pads lose their stick use a microfiber cloth and alcohol to wipe down the black rubber base of the pad and the baffle of the headphone and let dry before reapplying the pad.
Carry Case
Your Dan Clark Audio headphones comes with a custom EVA case for protection. There is a pouch inside the case to store your cable and a small amp, DAC, or DAP.
Warranty
Dan Clark Audio offers a 2-year warranty for headphones. The warranty
commences on the date of purchase and covers the heaphone cable and
accessories. Warranty is transferable provided there is documentation of
original purchase that confirms purchaser bought the headphones in their
country of residence. Warranty is void and is non-transferable for Gray Market
headphones e.g. international customers purchasing from US resellers and
shipping to a friend or freight-forward for export to any country with an
authorized reseller.Warranty does not cover damage by the owner
dismantling the unit, dropping, damage by failure of electronics, etc or
naturally occuring compression or other wear to ear pads. Acts of God and all
the rest of the usual caveats apply which reinforce a warranty issue is
something Dan Clark Audio did wrong or that was instrinsically wrong with the
product we received from our suppliers. We will repair or replace defective
goods at our discretion. Please see http://DanClarkAudio.com for details on
return merchandise authorizations for warranty issues and returns.
Registration
Visit https://DanClarkAudio.com/register to
register your product. 3366 Kurtz St Suite 200 San Diego, CA 92110 + 1 ( 6 1
9) 501 -631 3