car-royal 9800 Drill Template for CRCODE-007 User Manual
- June 5, 2024
- car-royal
Table of Contents
car-royal 9800 Drill Template for CRCODE-007
Drilling template for 9800, 7700 & 6600 Series exit
devices using CRCODE-007 and CRCODE-101
INSTRUCTIONS
- Determine door opening (LHR or RHR)
- On the back of the head assembly mark centerlines using the center hub location as the center point
- Measure and mark 7/8” from the center line as the center of the hole to be drilled
- Drill a 7/32” diameter hole through
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>