kitchenware 19109 6-Speed Hand Mixer Instruction Manual

kitchenware 19109 6-Speed Hand Mixer

Safety

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

1. READ ALL INSTRUCTIONS.

2. To protect against risk of electrical shock do not put cord, plugs, or appliance in water or other liquid.

3. The appliance is not intended for use by Children
   or by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge.

4. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.

5. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.

6. Avoid contacting moving parts.

7. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Contact Consumer Service.
   NOTE:
   DO NOT ATTEMPT TO REPAIR THE UNIT YOURSELF.
   THIS WILL VOID THE WARRANTY.

8. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.

9. Do not use outdoors.

10. Do not let cord hang over edge of table or counter.

11. Do not let cord contact hot surface, including the stove.

12. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters, dough hooks or whisk during operation to reduce the risk of injury to persons, and/or damage to the Hand Mixer.

13.  Remove beaters, dough hooks or whisk from the Hand Mixer before washing.

FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
ADDITIONAL IMPORTANT SAFEGUARDS

1.  All users of this appliance must read and understand this Instruction Manual before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 120V AC electrical outlet only.
3. Do not leave this appliance unattended during use.
4.  If this appliance begins to malfunction during use, immediately slide the speed control lever to 0 (OFF) and unplug the cord. Do not use or attempt to repair the malfunctioning appliance.
5. If this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water! Do not use this appliance after it has fallen into or becomes immersed in water.
6. To reduce the risk of injury to persons or property, never use this appliance in an unstable position.
7. Do not use this appliance for other than its intended use.

NOTES ON THE PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way
NOTES ON THE CORD

• a) A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
• b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
• c) If a long detachable power-supply cord or extension cord is used:

1.  The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance;
2.  If the appliance is of the grounded type, the extension cord should be a UL polarized plug 2-wire cord;
3. The longer cord should be arranged so that it will not drape over the countertop or table top where it can be pulled on by children or tripped over.

ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.

Instructions

Getting to Know Your 6-Speed Hand Mixer
Product may vary slightly from illustration

1. Dough Hooks (2)

2. Collar

3.  Beaters (2)

4.  Whisk

5. Storage Case

6.  EJECT Button

7. Handle

8. TURBO Button

9. Speed Control Lever

10.  Motor Housing

11. Cord with Polarized Plug

12.  Beaters: Designed for all-purpose mixing. Cut through thick or thin batters with ease.

13. Whisk: Use the single whisk to whip air into mixtures such as egg whites, egg yolks or cream

14. Dough Hooks: Spiral dough hooks are designed to mix or knead heavier yeast batters or bread dough. Hooks may also be used for gently mixing pastry dough.

15. Storage Case: Your Beautiful Hand Mixer sits and locks on top of the storage case for compact storage.

Before Using for the First Time
Carefully unpack the 6-Speed Hand Mixer. Wash beaters, dough hooks and whisk in warm, soapy water. Rinse well and dry thoroughly. Wipe motor housing with a soft, clean cloth or sponge. Never immerse the Hand Mixer motor housing in water or any other liquid.
Attaching Beaters

1.  Make sure the Hand Mixer is unplugged and the speed control lever is set to 0 (OFF).
2. Align notches on beaters with holes/slots on the bottom of the motor housing, and push until each clicks and locks into place.
   

NOTE:
Beaters are identical and may be inserted into either hole.
CAUTION:
Always unplug Hand Mixer before attaching or ejecting beaters.
Attaching Dough Hooks

1.  Make sure the Hand Mixer is unplugged and the speed control lever is set to 0 (OFF).
2.  Align notches on the collared dough hook and insert into the larger hole on the bottom of the motor housing. Push until it clicks and locks into place.
3. Align notches on the second dough hook and insert into the smaller hole. Push until it clicks and locks into place.

CAUTION:
Always unplug the Hand Mixer before attaching or ejecting dough hooks.
NOTE:
The collared dough hook will ONLY fit into the larger hole. Do not try to force it into the incorrect hole. This could damage the Hand Mixer.
CAUTION:
Use either both beaters or both dough hooks. Do not attempt to use one dough hook with one beater. This could damage the Hand Mixer.
Attaching the Whisk

1. Make sure the Hand Mixer is unplugged and the speed control lever is set to 0 (OFF).
2.  Align notches on the single whisk and insert into the larger hole on the bottom of the motor housing. Push until it clicks and locks into place.
   

CAUTION:
Always unplug the Hand Mixer before attaching or ejecting the single whisk.
NOTE:
The collared whisk will fit and lock properly into the larger hole ONLY. Do not try to force it into the smaller hole. This could damage the Hand Mixer.
CAUTION:
The whisk is designed to be used on its own. When using the whisk, never use any other beater or dough hook. This could damage the Hand Mixer.

Operation

1. Be sure to unplug the power cord when the Hand Mixer is not in use. Make sure the speed control lever is set to 0 (OFF).

2.  Attach 2 beaters, 2 dough hooks or 1 single whisk following
   the procedures previously described.

3.  Plug the cord into a 120V AC electrical outlet.

4.  Place beaters, dough hooks, or whisk directly into container holding ingredients to be mixed.

5.  Slide the speed control lever from Speed 1 to 6 to adjust speed to match the mixing task. (See Beautiful Mixing Chart.)

6. Mix ingredients to desired consistency.
   CAUTION:
   When kneading yeast dough, set the speed to the lowest setting, increase speed gradually until the highest speed is achieved.

7. Press the TURBO button from any speed setting to give the Hand Mixer a short boost of power.
   CAUTION:
   To avoid damage to the Hand Mixer, DO NOT use the TURBO boost feature for more than 2 minutes at a time.

   • To avoid damage to the Hand Mixer, DO NOT use the Hand Mixer for more than 5 minutes continuously.

8.  After mixing is complete, slide the speed control lever to 0 (OFF), and unplug the appliance.

9. Press down firmly on the EJECT button to release beaters, dough hooks or whisk. (Figure 4)

10.  Scrape excess batter off the beaters using a rubber or plastic spatula. CAUTION: DO NOT strike beaters, dough hooks or whisk on the rim
    of the bowl. This could damage the attachments.

6 Speed Settings plus TURBO!

1.  Slide the speed control lever to begin mixing from Speed 1 (LOW) to Speed 6 (HIGH).
   

2. Press the TURBO button for a burst of power at any speed setting. Resume the previously selected speed by releasing TURBO button. CAUTION: DO NOT use the TURBO boost feature for more than 2 minutes at a time as the motor may overheat and cause damage to the unit.

Beautiful Mixing Chart: Choosing Mixing Speeds & Attachments
These are general guidelines for selecting the best speed to stir, blend, mix, beat, whip or knead ingredients with your 6-Speed Hand Mixer and the best attachments to use. Refer to recipes for suggested Hand Mixer speeds and times. If your Hand Mixer slows down, switch speed control to a higher speed, press the TURBO feature for a brief surge of mixing power or divide the quantity of ingredients being mixed.

Beaters/Whisk
3| MIX| Mix cake batters, mixes and frosting. Mash potatoes, mix cream cheese spreads. Mix yeast pastry dough.|

Beaters/Whisk

Dough Hooks

4| BEAT/ CREAM| Beat whole eggs and frosting. Cream butter and sugar.| Beaters
5 – 6| FINISH/ WHIP/ KNEAD| Finish cookie dough or other heavy batters. Whip/beat potatoes. Prepare light and fluffy mixtures. Whisk dressings, sauces, egg whites.

Knead yeast doughs and breads.

|

Beaters
Beaters/Whisk

Dough Hooks

Beautiful Mixing Hints

1.  Climatic conditions, seasonal temperature changes, temperature of ingredients are factors that may cause food textures to vary from area to area and all play a part in the required mixing time and the results achieved.
2.  Measure ingredients and set aside before blending.
3. Always begin mixing at lower speeds, then gradually increase to the recommended speed called for in the recipe.
4. To avoid mixing messes, use low speeds when adding dry ingredients.
5. Refrigerated ingredients, such as cream cheese, butter and eggs, should be at room temperature before beating or whipping.
6. When whipping cream, chill clean bowl and whisk in the freezer and use cold, heavy cream.
7. To eliminate the possibility of egg shells in the mixture, always break eggs into a separate container before adding to the mixing container.
8. When whipping egg whites, use a copper mixing bowl, if available. A spotlessly clean stainless steel or glass mixing bowl can be used. NOTE: Plastic mixing bowls are not recommended.
9.  Do not over-beat. Follow recipe instructions.

Removing Attachments: Beaters, Dough Hooks or Whisk

1. Make sure Hand Mixer is unplugged.
2. Slide the speed control lever to 0 (OFF).
3. Press down firmly on the EJECT button to release beaters, dough hooks or whisk.
   

CAUTION:

Always unplug Hand Mixer before attaching or ejecting beaters, dough hooks or whisk.

User Maintenance Instructions

This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Any servicing that requires disassembly other than cleaning must be performed by a qualified appliance repair technician.

Care & Cleaning Instructions

CAUTION:
NEVER IMMERSE MOTOR HOUSING IN WATER.

• Always unplug Hand Mixer before removing attachments and before cleaning. Severe injury can result if the Hand Mixer is accidentally turned ON.

1. Press down firmly on the EJECT button to release beaters, dough hooks or whisk.
   

2. Wash in warm, soapy water. Rinse well and dry thoroughly.
   NOTE:
   All attachments: 2 beaters, 2 dough hooks, and 1 whisk are dishwasher-safe.

3. 3. Wipe motor housing with a damp cloth or sponge.

Storing Instructions

1. Make sure the Hand Mixer is unplugged and the speed control lever is set to 0 (OFF).

2. Cord may be loosely wrapped around motor housing. Never wrap cord tightly around the appliance. Do not put any stress on the cord where it enters the unit, as it could cause the cord to fray and break.

3. Store Hand Mixer and attachments into the storage case. Your Beautiful Hand Mixer sits and locks on top of the storage case for compact storage.(Figure 5)

4. Store in a clean, dry place.

Limited Two-Year Warranty
Sensio Inc. dba Made by Gather™ hereby warrants that for a period of TWO YEARS from the date of purchase, this product will be free from mechanical defects in material and workmanship, and for 90 days in respect to non-mechanical parts. At its sole discretion, Sensio Inc. dba Made by Gather™ will either repair or replace the product found to be defective, or issue a refund on the product during the warranty period. The warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt, as proof of purchase is required to obtain warranty validation. Retail stores selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the warranty.
Exclusions:
The warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use of the product, use of improper voltage or current, improper routine maintenance, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than qualified Sensio Inc. dba Made by Gather™ personnel. Also, the warranty does not cover Acts of God such as fire, floods, hurricanes, or tornadoes. Sensio Inc. dba Made by Gather™ shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Apart from the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in time to the duration of the warranty. Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, and therefore, the above exclusions or limitations may not apply to you. The warranty covers specific legal rights which may vary by state, province and/or jurisdiction.
How To Obtain Warranty Service:
You must contact Customer Service at our toll-free number: 1-877-775-3564. A Customer Service Representative will attempt to resolve warranty issues over the phone. If the Customer Service Representative is unable to resolve the problem, you will be provided with a case number and asked to return the product to Made by Gather Attach a tag to the product that includes: your name, address, daytime contact telephone number, case number, and description of the problem. Also, include a copy of the original sales receipt. Carefully package the tagged product with the sales receipt, and send it (with shipping and insurance prepaid) to SENSIO Inc.’s address. Made by Gather shall bear no responsibility or liability for the returned product while in transit to SENSIO Inc.’s Customer Service Center.

References

• Beautiful – Beautiful™

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>