ARG Motion Sensors For Gate Automation User Manual
- June 13, 2024
- ARG
Table of Contents
ARG Motion Sensors For Gate Automation
General information
Adjustments
-
The sensitivity settings determine the size of the sensing field.
vertical angle:mounting hei -141 2,m2rn -
The vertical angle of the planar antenna determines the depth of the sensing field
-
The vertical angle of the planar antenna determines the depth of the sensing field
sensitivity:maximum
Lnstallation tips
-
Avoid Vibrations
-
DO not cover the sensor
-
Moving objects
-
Avoid proximity to nanoamps
-
Do not touch electronical parts”
-
Sensitivity adjustment potentiometer please gently, slowly rotating
Troubleshooting
| SYMPTOMS | PROBABLE CAUSES | CORRECTIVE ACTION |
|---|---|---|
| The door will not open and no red LED lights up | The sensor power is off |
Check the wiring and the power supply
The door opens and closes constantly| The sensor–5000hr door moving. when the
door creates vibrations pickup by the sensor| Increase the lilt angle and/or
reduce the sensitivity. Make sure that the sensor is correctly fixed Switch to
unidirectional mode(dip switch 1.0N) Increase the immunity(dip switch 4:014).
Reduce the sensitivity.
The door will notclose Red LED is OFF| ON-OFF switch at door control is in
wrong position or faulty.
Improper output configuration| Make suns that the ON-OFF switch for door
is in the ON or AUTOMATIC position Check the output configuration setting on
each sensor connected to the door operator.
It rains and the sensor detects for no apparent mason.| The
sensor detects the motion of the rain drops.| Use the ARB
accessory Switch to unidirectional mode and Increase the immunity(dip
switches 1114:ON).
Technical specifications
| Technology | microwave and microprocessor |
|---|---|
| Transmitter frequency | 24.125GHz |
| Transmitter radiated power | <20 dBm EIRP |
| Transmitter power density | <5mW/cm |
| Maximum mounting height | 3m |
| Tilt angles | 0 |
| Detection field(mounting height=2 2m) | 4m(W)x 2m (D) |
| Detection mode | motion |
| Minimum speed | 5cm/s(measured in the sensor axis) |
| Supply voltage | 12V to 24V AC/DC +30 10% |
| Mains frequency | 50 to 60 |
| Power consumption | <2W(VA) |
| Output relay(free of potential change-over contact) | |
| Max contact voltage | 42V AC-60VA(AC) |
| Max. contact current | 1A(resistive) |
| Max_switching power | 30W(DC)/60VA(AC) |
| Hold time | 0.5s |
| Temperature range | -20 ( to ‘ 55 |
| Degree of protection | 11)54 |
| Norm Conformity | R&TTE 1999/5/EC EMC 89/336/EEC |
| Material | ABS |
| Color of housing | black smoked, aluminium finish |
| Dimensions | 120mm(W)•80mm(H) 50mm(D) |
| Weight | 0215kg |
| Length of cable | 25m |
Accessories(sold individually)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>