SIIG CE-H27611-S1 Full HD Wireless HDMI Extender with Loopout and IR Kit User Guide

SIIG CE-H27611-S1 Full HD Wireless HDMI Extender with Loopout and IR Kit User Guide

Features

• Support HDCP 1.3
• Build-in EDID, resolution up to 1080p@60Hz
• HDMI wireless transmission distance up to 656ft/200m. (In an open environment without Wi-Fi interference.)
• Support one transmitter and multiple receivers, up to 4 receivers.
• Support one-way IR extend
• Support PCM 2ch audio
• 5G Wireless connectivity

Package contents

1. Wireless HDMI Transmitter
2. Wireless HDMI Receiver
3. Power adapter 12V/1A x2
4. 5G WiFi antenna x4
5. IR Emitter Cable (For TX IR out)
6. IR Receiver Cable (For RX IR in)
7. Quick start guide

Layout

Transmitter

1. DC Power jack:
   connect to power adapter DC 12V/1A

2. Power LED:

3. RESET: Restore factory settings after long press for 5s, and require to pair again

4. HDMI In: Connect to HDMI source

5. Loop Out: Connect to HDMI display

6. IR Out: Connect to IR Emitter Cable

Receiver

1. DC Power jack:
   connect to power adapter DC 12V/1A

2. Power LED:

3. RESET: Restore factory settings after long press for 5s, and require to pair again

4. HDMI Out: Connect to HDMI display

5. IR In: Connect to IR Receiver Cable

Pairing Instruction

Pairing Method:

1. Power on the TX & RX
2. Wait for 30 sec
3. Connect HDMI cable to TX input and RX output
4. Wait for 10 sec
5. Remove the HDMI cable, then re-plug the power to restart the TX & RX

Application

Support

For more info or tech support
http://www.siig.com/support

References

• SIIG Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>