Brilliant 21723-05 5 Blades Ceiling Fan White Instruction Manual

INSTALLATION MANUAL

21723-05 5 Blades Ceiling Fan White

THIS CEILING FAN MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN, AND AN ELECTRICAL SAFETY CERTIFICATE MUST BE ISSUED ON COMPLETION OF THE INSTALLATION

Congratulations on the purchase of your new quality Brilliant Ceiling Fan. Before first using, it is most important that you read and follow the instructions in this Installation Manual, even if you feel you are quite familiar with this type of product.
Find a place and keep this manual handy for future reference.

AMARI 56” 5 BLADE DC CEILING FAN Series 2

Code| Colour| Size
21723/05| Matt White| 56” (1420mm)
21723/06| Matt Black| 56” (1420mm)
AMARI 56” 5 BLADE DC CEILING FAN WITH DIMMABLE LED CCT LIGHT Series 2

Code| Colour| Size
21725/05| Matt White| 56” (1420mm)
21725/06| Matt Black| 56” (1420mm)

Note:
A wall controller & WiFi receiver option for this fan is available and is sold separately. Enquire model DCWALLCONTROL & 21725SMART for more details.

IMPORTANT SAFEGUARDS

Read all instructions carefully, even if you feel you are quite familiar with this type of appliance.
When using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injury, these basic safety precautions should always be followed:

1. This appliance MUST be installed by a Qualified Electrical Contractor in accordance with the local regulations, and all local, state and national electrical codes. Any alterations or additions to building wiring must be completed by a licensed electrical contractor, or person authorised by legislation to work on the fixed wiring of any electrical installation.
2. The ceiling fan must be connected to a 220-240V AC 50Hz power supply.
3. All electrical work must only be undertaken after disconnection of the power by removing fuses or turning off the circuit breaker, to ensure all pole isolation of the electrical supply.
4. The fan must be earthed.
5. The fan must be installed so that the blades are more than 2.1 metres above the floor.
6. The structure that the ceiling fan is connected to must be capable of supporting a weight of at least 45kg. The fixing must be able to support the moving weight of the fan and must not twist or work loose.
7. Make sure that the installation site will not allow the rotating fan blades to come into contact with any object and that there is a minimum clearance of 150mm (6”) from the blade tip to the wall or ceiling. Please note that the bigger this clearance is the better the airflow from your fan will be.
8. DO NOT use outdoors unless covered. Refer to Warranty terms for Alfresco use.
9. DO NOT connect the fan motor to a dimmer switch. This may damage the motor. Use ONLY the provided wall controller (If applicable).
10. This appliance is not intended for use by young children or infirm persons without supervision.
11. Young children should be supervised to ensure they DO NOT play with the appliance.
12. It is not recommended that ceiling fans and gas appliances be operated in the same room at the same time.
13. Suggest turn the fan speed to lower rate (eg. #1 or #2) before reversing the fan direction. This will prevent any damage to the motor of the fan or controller.
14. Do not insert anything into the fan blades whilst they are spinning. This will damage the blades and upset the balance of the fan causing the unit to wobble.
15. After the fan is completely installed make sure that all base and fan blade fixations are secured and tightened to prevent any problems.
16. Because of the fan’s natural movement, some connections may loosen. Check the support connections, brackets and blade attachments twice a year to make sure they remain secured. If any are loose, tighten.
17. DO NOT use a solid-state dimmer type fan controller. Use ONLY the provided switch controller for fan speed control (If applicable).
18. An all-pole disconnection incorporated in the fixed wiring is to be provided, such as a n all-pole switch or a supply cord fitted with a plug.
19. If a remote control is installed, remove the wall controller.
20. Beware of height installation closure.
21. A blade balancing kit is included. Ensure blades are balanced immediately after installation to reduce wobble and noise

IMPORTANT NOTE:
The important safeguards and instructions given in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care are factors which cannot be built into any product. The persons caring for and using the unit must supply these factors.

SUGGESTED TOOLS NEEDED

WARNING

1. To avoid fire or electric shock, follow all wiring instructions carefully.
2. Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turn off at the main fuse box before wiring.
3. Do not install or use fan if any part is damaged or missing.
4. This product is only designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Brilliant Lighting. Substitutions of parts or accessories not designated for use with this product by Brilliant Lighting could result in personal injury or property damage.

MUST BE INSTALLED BY A LICENSED ELECTRICIAN

UNPACKING

PREPARATION:

• Unpack your ceiling fan carefully, and dispose of the packaging materials thoughtfully. Place all parts and components, on a cloth or soft surface to avoid damage. DO NOT lay the motor housing on its side, the housing may get damaged.
• Before commencing installation, check that all parts are included. NB: You may need to remove all foam packaging material to ensure there are no missing components.

PART LISTS:

|
---|---
| |
---|---|---
Hanging Bracket| Receiver| Remote Control

For Blade Balance:
Balancing Slide × 1
Weight block (3G × 3)

PARTS INCLUDED:

1. Blade mounting screws x10 attached on the blade mounting plate.
2. Remote control holder mounting screws x2 and plug x2.
3. Bracket mounting screws x4.
4. Cross pin with cotter pin preassembled at downrod.
5. Blades balance kits.
6. Canopy screw cover.

INSTALLATION

CHOOSING A SUITABLE LOCATION:

• Ceiling fans should be installed in the middle of the room, with a safe distance of at least 2.1m from floor, and 150mm from wall.
• An extension rod may be required for rake ceiling installation.
• When installed the ceiling fan on a raked ceiling, ensure the open side of the mounting bracket is facing toward the higher side of the ceiling.

CAUTION: Before installing the fan, make sure you have turned OFF the electricity supply.

MOUNTING THE HANGING BRACKET

• Secure the hanging bracket to the ceiling joist or suitable structure that is capable of carrying a load of at least 45kg, with the two long fixing screws provided. Ensure that at least 30mm of the screw is threaded into the support.
  NB: The fixing screws included are designed for use when ceiling fan is secured onto timber joists. For all other surfaces, additional and suitable fixing screws for that surface will need to be purchased. NOTE: Ensure building cable will enter the canopy close to terminal block. DO NOT enter the building cable direct on top of the hanging ball area.

• Make sure that the position of installation will not allow the blades to come into contact with any object. The fan must be mounted so that the tips of the blades are at least 2.1 metres above the floor.

ELECTRICAL CONNECTIONS

• The building cable should enter the canopy about 10-15mm from the terminal block.
• Connect the mains supply L-Active, N–Neutral & Earth cable to the terminal at mounting bracket as per marking on it. Ensure connections are firm. For your convenience, and to assist in easy installation & cleaning, your ceiling fan is connected with Brilliant’s easy connect system. Simply connect the male and female couplings, and then ensure remote control receiver and all excess wiring is retained inside the ceiling canopy. Ensure that a wall isolation switch is installed (Not Supplied)

ATTACH BLADE

• Before attach the blades remove the blade mounting screws from the screw bag. (Fig 1)
• To attach the blades on to the fan motor, place the blade align with the mounting holes on the blade mounting bracket (Fig 2). With ‘THIS SIDE UP’ (Fig 2a) marking on the blade and attach to the fan motor then securing it in place using the screws removed previously.
• Repeat above steps to attached the rest of the blades and tighten firmly. DO NOT OVER TIGHTEN the screw, this will damage the blades, but ensure it is secure.
• Attach the motor upper cover and using the screws provided. Ensure screws are tighten firmly. (Fig 3)

ATTACH MOTOR HOUSING BOTTOM COVER

• Attach the cover by rotating it clockwise on the screw track at the shaft until it tighten and secure.
• Ensure the cover not touching the fan blade.

ATTACH LIGHT KIT (Apply for Fan come with light kit)

• Before attach the light kit loosen and remove the light kit fixed screws on the light kit mounting plate. (Fig 4)
• To attach the light kit place the light kit on the mounting plate and attach the plug to the light kit connector. (Fig 5) Then align the light kit with the mounting holes and replace the screws previously removed to secure the light kit. (Fig 6) Ensure the screw are tighten firmly.
• Attached the diffuser by twisted until it lock and secure. (Fig 6a)

ATTACH DOWNROD AND YOKE COVER

• After detach the hanging ball from the downrod, route the motor wires through the downrod. (Fig 7)
• Align the cross pin holes in the downrod with the holes in the downrod coupling. (Fig 8)
• Install the cross pin and secure with the cotter pin. The cross pin must go through the holes in the downrod coupling and the holes in the downrod. (Fig 8)
• Tighten the 2x downrod jam screws to make sure the downrod is secured. (Fig 9)
• Insert yoke cover, canopy screw cover and canopy. Then insert hanging ball through downrod and insert the cross pin back into the downrod removed previously. (Fig 8)
• Tighten the jam screws back to hanging ball and ensure it is tight and secure. (Fig 9)

HANGING THE FAN

• Carefully lift the fan, and place the downrod ball assembly into the mounting bracket ensuring that the ball correctly locks into place.
• Refer to the following section detailing ‘Electrical Connection’ on page 6 for details on how to wire this product correctly.
• After the fan has been wired to the power supply, carefully position all excess cable inside the boundaries of the hanging bracket.

ATTACH CANOPY

• Carefully slide the canopy up to cover the hanging bracket and ball joint, taking care not to damage any wires. Once in position, secure the canopy with the screws provided (Fig. 10).
• Suggest to keep the Common mode noise filters at the opposite side of the terminal block.
• Move the canopy screw cover up to cover the screws at the canopy (Fig. 11).

BALANCING

• This fan includes a blade balancing kit. Upon initial installation, the balance kit should be used on the fan blades to reduce wobble.
• The balance kit includes instructions on how to perform the balancing procedure.
• Balancing the fan and reducing wobble will result in quieter operation and optimum performance.

REMOTE CONTROL OPERATIONS

1. Fan OFF.

2. Windbreeze
   • Speed randomly change

3. Fan ON & Speed button:
   • Speed 1 (Slow est)
   • Speed 2
   • Speed 3
   • Speed 4
   • Speed 5
   • Speed 6 (Fastest)

4. Forw ard/Reverse button

5. Timer (f an only)

6. LED dimming:
   • LED- = dim low
   • LED+ = dim high

7. LED light ON/OFF

WALL INSTALLATION

• Choose a suitable location and install the wall mount remote control holder

• Drill two holes in the wall using the holes in the wall mount remote control holder as a template.
  Note: exercise caution to avoid drilling into existing electrical wiring!

• Use screws and suitable fixture system to attach the bracket to the wall securely.
  NOTE: Ensure wall mount holder is level.

• Remove the battery cover and insert 2x AAA battery into the remote control transmitter and ensure the battery orientation is correct. Replace the battery cover removed previously.

SETUP
The remote control transmitter and receiver have been f actory pre-set/paired and ready to be used immediate ly. If
require to re-pairing the transmitter and receiver, f ollow below instruction:

1. Turn the ceiling fan main switch pow er Off for 10 seconds.
2. Turn the ceiling fan main switch pow er on, and will hear a Beep sound then w ithin 3 seconds press and hold the ‘FAN OFF’ button.
3. Wait until the receiver emitted a long Beep sound then let go the button and the pairing process is completed.
4. If the pairing process un-successf ully, then repeat step 1 to step 3. ( Note: Ensure the batteries have enough power)

SETUP FOR MULTIPLE FANS
The remote control transmitter can be used to control multiple receivers.

1. On the ceiling fan you w ant to pair, turn the main switch power OFF for at least 10 seconds.
2. Turn the ceiling fan main switch pow er on, and will hear a Beep sound then with in 3 seconds press and hold the ‘FAN OFF’ button.
3. Wait until the receiver emitted a long Beep sound then let go the button and the pairing process is completed.
4. If the pairing process un-successf ully, then repeat step 1 to step 3.

SETUP FOR SMART WIFI RECEIVER (OPTIONAL – SOLD SEPARATELY)

If you bought the Amari Smart Wifi receiver, follow below steps for setup into pairing mode.

1. On the ceiling fan you w ant to pair, turn the main switch pow er OFF for at least 10 seconds.
2. Turn the ceiling fan main sw itch power on, and will hear a Beep sound then within 3 seconds press and hold the ‘FORWARD REVERSE’ button on the remote.
3. Wait until the receiver emitted 3x Beep sound then let go the button and the Smart receiver is now in pairing mode.
4. Download BrilliantSmart App and follow the instructions to add the ceiling fan.

SELECT LED CCT LIGHT

The sw itch to select your desire color temperature are located on the LED array.

1. WW (WARM WHITE) – 3000K
2. CW (COOL WHITE) – 4200K
3. NW (NATURAL WHITE) – 6000K

WARNING!
MAKE SURE THE LIGHT IS TURN OFF BEFORE SELECTING THE CCT SWITCH

WALL CONTROLLER (OPTIONAL – SOLD SEPARATELY)

1. Fan Speed Indication light.

2. Fan OFF button

3. Fan ON & Speed Change button:
   • Up (change to higher)
   • Down (change to lower)

4. Forward/Reverse button

5. Windbreeze button

6. LED light dimming down

7. LED light dimming up

8. Light ON/OFF button

INSTALLATION & SETUP

1. Choose a suitable location to install the wall controller (optimal working distance is 5-8m from fan)
2. Drill/Cut holes in the wall using the standard C-Clip plaster wall bracket as a template (not included).
3. Perform wiring according to L-Active, N–Neutral & Earth (Ground) cable to the terminal hole.
4. Screws the wall controller housing to the C-Clip bracket, and attached the cover back to the housing.

Note: Exercise caution to avoid drilling/cutting into existing electrical wiring!
This wall controller needs to be re-paired with the fan receiver. Follow below instruction to setup:

1. Turn the ceiling fan main switch power Off for 30 seconds.
2. Turn the ceiling fan main switch power ON, and you will hear a Beep sound then within 3 seconds press and hold the FAN OFF button.
3. Wait until the receiver emitted a long Beep sound then let go the button and the pairing process is completed.
4. If the pairing process un-successfully, then repeat step 1 to step 3. (Note: Ensure the wiring is correct)

MAINTENANCE

CARE & CLEANING

• Periodic cleaning of your ceiling fan is the only maintenance required.
• Use a soft brush or lint free cloth to avoid scratching the finish. Please turn off electricity when you do so.
• Do not use water when cleaning your ceiling fan. It could damage the motor and create the possibility of an electrical shock.
• The motor has a permanently lubricated ball bearing, and as such is maintenance free.

NOISE

• The manufacturer warranty covers actual faults that may develop, but NOT minor complaints, e.g. hearing slight noise from motor in operation – ALL ELECTRIC MOTORS ARE AUDIBLE TO SOME EXTENT, more so, when the fan is operating at low speeds.

WOBBLE

• Ceiling fans are mounted very securely on steel brackets with rubber cushioning or with ball joints to allow free movement.

• Ceiling fans are designed to move during operation because they are not generally rigidly mounted
  – if they were, they could generate excessive ceiling vibration and stress on their mountings.

• Movement of a couple of centimetres is quite OK and does not suggest the fan will fall down.

• Please note that all ceiling fans are not the same, even in the same model – some may move more or less than others.

NORMAL WEAR AND TEAR:

• Threaded components working slighting loose or blade carriers even slightly bent due to vigorous cleaning or bumping can cause extra wobble and noise. THIS IS NOT COVERED UNDER WARRANTY but a little care and maintenance can reduce or prevent this problem.

RIPPLE CONTROL FILTER:

• In parts of Australia (NSW and QLD), the power company superimposes a signal voltage onto the mains household voltage. This signal voltage is used to remotely control consumer’s electric hot water heaters and other devices throughout the surrounding area.
• Unfortunately this signal can appear at the ceiling fan as a loud intermittent “hum”. If this noise is apparent please contact your local Electricity service provider on how they can assist to provide rectification, usually in the form of a mains supply ripple filter to filter out this signal.

ENVIRONMENTAL PROTECTION:
This electrical product should not be disposed as normal waste. Please always recycle! Check with your Local Council about your recycle options.

TROUBLESHOOTING

Check main and branch circuit breakers
B Loose wire connections to the fan.| B Check line wire connections to the fan.
C Speed controller not in the correct position.| C Check speed controller’s position.
Fan wobbles| A Fan blades are not horizontal to the ceiling.| A Re- tighten all screws on blades. Do not make any adjustments by applying pressure up or down on blades.
B Blade screws are loose.| B Make sure all screws are tightened.
Fan sounds noisy| A Loose fan blades.| A Retighten all screws on fan.
B Ceiling fan not secured against ceiling.| B Retighten all screws in the hanging bracket.
C Incorrect speed controller.| C Change speed controller to the one supplied with the unit.
Mechnical noise| A Fan has not settled in fully.| A Allow at least 8 hours settling in period.
Remote Control
Receiver beeping continuously for 10 times| A Remote control not respond
B Battery power low
C Loose wires connections| A Check the batteries orientation is correct.
B Replace with new batteries.
C Check wire at the fan & receier connectors.

TECHNICAL DATA

Model Number| Size| Rated Voltage| Rated Fan Power| Rated Light Power| Rated Current for Light| Rated PF for Light
---|---|---|---|---|---|---
21723| 56 INCH| 220-240V AC 50Hz| 35W| N/A| N/A| N/A
21725| 56 INCH| 220-240V AC 50Hz| 35W| 24W CCT DIMMABLE| 0.2027A| 0.4463

SPARE PARTS & ACCESSORY

Remote Control kit| 24W LED CCT Dimmable Array| Acrylic Light Diffuser| 56” ABS Blade Set| Extension Rod With & Without Light kit
---|---|---|---|---
21723SP002S2
21725SP002S2
21725SMART
(Smart WiFi)| 21721SP001S2| 21721SP002| 21723SP052 (MATT WHITE)
21723SP062 (MATT BLACK)| 21810/05 (MATT WHITE)
21810/06 (MATT BLACK)

WARRANTY

Please note, this warranty voids any other warranties supplied with this product and complies with the new consumer guarantee requirements.
The benefits conferred by this warranty are in addition to all implied warranties, other rights and remedies in respect of the product, which the consumer has under Australian Consumer Law.
The original purchaser of this Brilliant Ceiling Fan is provided with the following warranty subject to the Brilliant Warranty terms and conditions as found on the Brilliant website and the following conditions.
Brilliant Lighting (Aust) Pty Ltd warrants this ceiling fan motor for a period of 6 years from the date of purchase, the first 3 years are covered by an In- home warranty. All parts deemed defective in workmanship or materials will be replaced free of charge. Remote controllers, Wall controllers and Light fittings are subject to Limited warranty status.

*Consumable items suchas Batteries and Light Globes will not be covered by this warranty.
This warranty is in addition to any other rights and remedies of the customer under any law. In applications not intended for household, personal or domestic use, liability is limited to replacement or reimbursement of product only.
The warranted use of fans outdoors are limited to Enclosed Alfresco like areas where conditions are similar to indoor installations.
The warranty conditions for fans installed in Enclosed Alfresco areas are as follows:

• Fan must be shielded from wind and rain (enclosed area, min. 1.5m from edge of eave/roof).
• The warranty will cover open circuit motor faults, and remote control faults if not related to outdoor exposure.
• The Warranty will not cover outdoor-related issues such as rusting, or failure clearly caused by water, moisture or wind.
• The Warranty will not cover the external appearance or finish of any part of the ceiling fan.
• The Warranty will not cover wooden blades. These are recommended only to be used indoors.

The warranty does not cover Ripple Control noise/interference (identified by a periodic or intermittent hum). This must be addressed with your energy service provider.
The warranty does not cover noises or faults due to poor installation or failure to balance fans as per instructions.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure.
Any claim under this warranty must be made within the warranty period of the date of purchase of the product. To make a warranty claim please refer to the Warranty Claim Form on the Brilliant
Website: www.brilliantliahting.com.au

This w arranty is given by:
Brilliant Lighting (Aust) Pty. Ltd.
ABN 37 006 203 694
956 Stud Road Rowville, VIC 3178
Phone: 03 9765 2555
Email: [email protected]

MADE IN CHINA

Documents / Resources

| Brilliant 21723-05 5 Blades Ceiling Fan White [pdf] Instruction Manual
21723-05, 21723-06, 21725-05, 21725-06, 21723-05 5 Blades Ceiling Fan White, 21723-05, 5 Blades Ceiling Fan White, Ceiling Fan White, Fan White
---|---

References

• brilliantlighting.com.au/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>