Brilliant 22163 Smart WiFi Video Doorbell-Chime User Manual
- October 27, 2023
- brilliant
Table of Contents
22163 Smart WiFi
Video Doorbell-Chime
User Manual
Box Content
Smart Doorbell x 1
User Manual x 1
Rechargeable Battery 18650 X 2
Installation Screw x 4
Screw Driver x 1| Hexagon socket head screw x 2
Allen Key x 1
Hardwiring cable x 2
USB Charger Cable x 1
Hardware Terminal Screws x 2
Doorbell chime x 1
---|---
Technical Specifications
DOORBELL
Model : 22163SP001/06
Protection : Class II
Input Voltage : 220V-240V AC 50Hz
Working Temperature: +5°C ~ 40°C
Dimensions : 73mm x 43mm x 32mm
Weight : 285g
Security : Mac Encryption; WEP/WAPI/TKIP/AES
WiFi Standard : IEEE802.11b/g/n
System Req’s: iOS 8.0 or higher, Android 4.1 or higher
Camera : 1080P
Memory Card: Max 64GB (not included)
Warranty : 3 Years
CHIME
Model No: 22163SP002/06
Working voltage: AC 14V–24V or 2 pcs 18650 Rechargeable Batteries
RF Frequency: 433Mhz
Working distance: up to 20m (depending on local conditions
Ringtone levels: 0–110dB 5 levels – 4 plus Silent Mode
Rating : IP20
Weight : 54g Warranty: 3 years
Installation
FOR YOUR SAFETY:
- If you are in any doubt as to the installation of this product, please consult a qualified electrical contractor before proceeding.
- Do not install in a position where the fitting can be easily accessed by children or the infirm.
- Unpack the fixture carefully and dispose of the packaging material thoughtfully.
- Ensure power outlet is switched OFF.
- Carefully plug the doorbell chime into the power outlet. Ensure the distance between the doorbell chime and doorbell are within working range. Suggested working range up to 20m.
- Before turning on the power, ensure you have installed a Brilliant Smart Doorbell Model No. 20761 and it is fully functioning.
Pairing Chime with Brilliant Smart WIFI Doorbell
-
Turn on the power and your doorbell chime will ready for pairing with the Smart WIFI Doorbell. Once the power is turned on, the doorbell chime will sound ‘Ding-Dong’ twice with the blue LED light blinking, and then stop.
-
Press the volume control button ‘3’ to select the desired volume. Level 1 is mute function (when activated only the LED indicator light comes on). Level 2 to 5 increases the sound gradually.
-
Select your desired ringtone by pressingthe next ringtone button ‘4’. After you have selected your desired ringtone, you can start to pair the doorbell chime with your
Brilliant Smart WIFI Doorbell. -
Press and hold the volume control button ‘3’ for 5 seconds or more until you heard a ‘Ding’ sound from the doorbell chime.
-
Now your doorbell chime is in pairing mode which lasts for about 8 to 10 seconds.
Press the BrilliantSmart WiFi Doorbell call button within the pairing time frame. If you miss the time frame please turn off the power and repeat from step 1 above. -
After the doorbell chime pairing is successful, it will give a ‘Ding Ding’ sound.
-
Press the Brilliant Smart WiFi Doorbell call button again to confirm the doorbell chime pairing is successful. The doorbell chime will play the ringtone you selected previously and the LED indicator will blink.
-
The pairing process is completed.
NOTE:
- To change the ringtone, you will have to reset the doorbell chime by pressing and holding the next ringtone button ‘4’ for 5 seconds or more. This will reset the doorbell chime to factory default mode and disconnect the doorbell chime from the Brilliant Smart Wi-Fi Doorbell.
- Repeat steps 3 to 7 to select your desired ringtone and pair again with the Brilliant Smart WIFI Doorbell.
Installation
BEFORE INSTALLATION, PLEASE CHECK THAT THE LOCATION OF THE SMART DEVICE IS
WITHIN RANGE OF YOUR HOME WIFI AND SIGNAL IS STRONG.
Step 1: Install the back plate on the wall
Step 2: Using a screw driver remove battery cover. remove batteries B and peel away contact A protection tabs. replace batteries and battery cover. charge doorbell via USB port at least 6 hours before use.
Step 2: For hard wiring installation, please make sure your existing
transformer is AC 14V—24V.
Use 2 x hard wire screws to fix 2 x hardwire cables to the power terminals on
mounting bracket.
Connect to your existing AC 14V–24V transformer.
Step 3: To fix the doorbell on the wall, align doorbell with bracket, push against wall. Then push downwards to lock. Finally insert 2 x hexagon head screws to secure.
Connect to your WIFI
Ensure your mobile phone is connected to your 2.4GHz WiFi network.
Your mobile phone and your smart device needs to be within good signal
strength range of your WiFi router. (Refer to your router specifications for
max range.)
Download the Brilliant Smart App
Please download the free Brilliant Smart app from the App store or Google Play store, or scan the QR code below.
http://www.brilliantsmart.com.au/downloadapp.html
Register the BrilliantSmart App
Open the BrilliantSmart app.
For new users, register a new account or if existing user, login with your
user name and password.
Configure your Brilliant Smart App
Setting up your Home You can setup multiple homes or locations. Click ‘Add Home’ button. Or click on ‘Home’ top left if you are adding or modifying details then ‘Home Management’ to setup your home(s), add or rename rooms and share devices.
Add your Smart Device to your App
-
On initial power-on, the doorbell button will start blink slowly in blue Color and be ready to pair (1 times per second).
(If smart device does not automatically start blinking, press the reset button for 5 seconds until you hear voice instruction, then release pressing.) -
Open the Brilliant Smart App, tap ‘Add Device’ (if empty room) or ‘+’ to add your smart device.
-
Select ‘Smart Camera’ in the list of devices then press ‘next step’.
-
Turn on power adapter at power outlet.
-
After approximately 15 seconds your Smart doorbell will now say ‘Camera Start’ then ‘Please Config Network’.
-
Power indicator on camera will now start to blink. If smart doorbells blinking then press ‘Confirm light blinks rapidly’.
Continue following connection guide. -
Enter your WIFI password
-
Once connected to your home WIFI, scan the ‘QR Code’ with smart camera. Hold ‘QR Code’ approx. 20 cm in front, facing the smart doorbell camera lens.
-
Wait for ‘Camera Configured’ then select ‘Heard the Beep’ Smart doorbell will now start connecting to app.Your smart doorbell is connecting.
Wait until 100% complete. -
Once connected you’ll get a menu ‘Device added successfully’. Select the room your device is to be located.
You can click on the pen to change the device name, then press ‘Completed’. -
The smart device can now be controlled by the Brilliant Smart app.
-
If smart doorbell setup is unsuccessful click ‘How to set the indicator to flash quickly or with a prompt tone’ and follow the steps to reset smart camera.
-
Select ‘Otherwise’ in top right corner.
-
Select ‘Smartronix’ then go to ‘Brilliant Smart App Assistance’.
Go to www.brilliantsmart.com.au for full instructions and features.
Warning
- BrilliantSmart app screens may differ due to application updates & improvements.
- Please use the device as per instructions.
- To prevent injury DO NOT open or tamper with internals of this device
- Power surge/power loss could possibly reset smart device. If this happens follow setup instructions.
NB : BrilliantSmart app screens may differ due to application updates & improvements.
Disposal
Please dispose of this packaging and product thoughtfully once it has passed
its useful life. When your smart device comes to the end of its life or you
choose to update or upgrade it, please do not dispose of it with your normal
household waste.
Please recycle where facilities exist.
When disposing of this fitting, check with your local authority for suitable
options.
Warranty
Brilliant Lighting warrants this product against defects in manufacture and
workmanship for a period of 3 years from date of purchase. Warranty does not
include damage or loss arising from incorrect installation, operation or
maintenance of this product, damage caused through modification, or incorrect
installation.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Any claim under this warranty must be made within 3 years of the date of
purchase of the product.
Refer to our website brilliantlighting.com.au for terms and conditions and
warranty claims.
This warranty is given by:
Brilliant Lighting (Aust) Pty. Ltd.
ABN 37 006 203 694
956 Stud Road Rowville, VIC 3178
Phone: 03 9765 2555
Email:
warranty@brilliantlighting.com.au
MADE IN CHINA
Troubleshooting
Problem:
Smart device does not switch ON
Possible Cause | Suggested Solution |
---|---|
No Mains Power | Check connections, fuses and switches |
Problem:
Cannot link smart device with Brilliant Smart app
Possible Cause | Suggested Solution |
---|---|
1. Modem signal weak | Place device and modem closer together |
2. Router/modem/smart phone firewall is enabled | Disable firewalls on all |
devices
3. Internet connection is down| Contact your provider
4. Brilliant Smart app uninstalled correctly| Remove app and re-install
For any other problems connecting your smart device to Brilliant Smart app please visit: www.brilliantsmart.com.au/faqs
Brilliant Lighting
956 Stud Road
Rowville Vic 3178 Australia
www.brilliantlighting.com.au
Australian Sales
T 03 9765 2555
T 1800 817 754 (interstate only)
F 03 9763 0277
Ewarranty@brilliantlighting.com.au
New Zealand Sales
T 09 974 9618
E sales@brilliantlighting.co.nz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>