ANKER 735 CHARGER GaNPrime 65W User Manual
- June 5, 2024
- Anker
Table of Contents
ANKER 735 CHARGER GaNPrime 65W
Attention
Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by an AC plug.
- In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
- The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 79733
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC &
2019/1782/EU. The full text of the EU declaration of conformity is available
at the following internet address: https://www.anker.com.
Hereby, Anker Innovations Limited declares that this product is in compliance
with Electrical Equipment
(Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 &
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related
Products Regulations 2010. The full text of the GB declaration of conformity
is available at the following internet address: https://www.anker.com.
Specifications
Input
| 100-240V~1.8A 50-60Hz
---|---
Output
|
Use One Port (1
Use 1 Port Output
USB-C1(Top Port), USB-C2(Middle Port)
USB-C1/USB-C2 :
5V 3A /9V 3A /15V 3A /20V 3.25A (65W Max)
USB-A :
4.5V 5A/5V 4.5A /5V 3A /9V 2A/
12V 1.5A(22.5W Max)
Use Two Ports (2
USB-C1+USB-C2 : 65W Max USB-C1+USB-A :65W Max USB-C2+USB-A: 24W Max
Use Three Ports
USB-C1+USB-C2+USB-A : 65W Max
Total Output 65W Max
Average Active Efficiency
|
84.12%
---|---
Efficiency at Low Load (10%)
|
70.74%
No-Load Power Consumption|
0.23W
Recommended Operating Temperature
| 0℃～ 25℃ /32 ℉ -77 ℉
Customer Service
24-month limited warranty Please note that your rights under applicable law
governing the sale of consumer goods remain unaffected by the warranties given
in this Limited Warranty Lifetime technical support
support@anker.com
support.mea@anker.com (For the Middle East and Africa
Only)
(US) +1 (800)988 7973 Mon-Fri 6:15 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00; Sat-Sun 6:00-14:00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>