SIIG JU-SW4311-S1 4-Port Roaming KM Switch with USB 2.0 Hub User Manual
- June 5, 2024
- SIIG
Table of Contents
SIIG JU-SW4311-S1 4-Port Roaming KM Switch with USB 2.0 Hub
Features
-
Allow 4 Computers to Share USB Peripherals Seamless Switching among PCs by Moving The Cursor across Screen
-
Border And Circulating among PCs (Roaming Mouse Function)
-
Flexible Preset Screen Layout of 4 x 1 , 2 x 2, 1 + 3 or 1 x 4.
-
Multiple Control Methods Enable Smooth Switch Front Panel Push Button Control
Roaming Mouse Control
Hotkey Control -
Roaming Function Supports Windows, MAC, and Linux, No Software & Driver Required
-
Mouse Absolute Coordinate Technology Enables Seamless Switch among
-
PCs and Adapts to All Kinds of Mouse Sensitivity (DPI Resolution )
-
Allow Usage of Different Versions of Windows Simultaneously
Package Contents
- 4-Port Roaming KM Switch with USB 2.0 Hub
- Power Adapter 12V/1.5A
- User manual
Layout
Front Panel
- Link: PC online LED Blue: connected PC is power on
- Select: port selection LED Red: connected PC is selected
- PC 1,2,3,4 Button: Press to select PC
Rear Panel
- Power Jack: DC 12V/1.5A (support DC 9V -12V, 1.SA)
- Speaker/Earphone port at console connect to Speaker/Earphone
- USB HID console ports (for keyboard & mouse use only)
- USB 2.0 hub ports at console for peripherals 480mbps, SV/S00mA, USB 1.1 & 3.0 compatible
- PC-x input ports: Speaker/Earphone port for PC-x USB 2.0 Type-8 port for PC-x
PC BIOS Notice
The following BIOS setup changes are necessary for PC users and not necessary for Mac users.
- In STANDARD CMOS, set HALT ON ERROR to ALL BUT KEYBOARD.
- In PNP AND PCI SETUP, set PNP OS INSTALLED to YES and set USB IRQ to ENABLED
Limitation
- This unit is compatable with Windows,MAC, & Linux and might require some tweaking while used with other 0.5. (Requires Absolute Coordinate Support from 0.5). MAC bias might have certain problems due to different hardwares solutions.
- Windows Audio Sample Rate Adjustment of 48Khz Requires Windows 7 or Later Version
- USB HID Console Ports’ Total Power Consumption Should Be below 500ma
Hotkey Command
Basic Operation
Mouse Roaming Setting
Support
For more info or tech support
http://www.siig.com/support
Mar, 2022 Copyright© 2022 by SIIG, Inc. All rights reserved.