FRANKE VALIA60XS-5605281 600 Cooker Hood Instruction Manual

FRANKE VALIA60XS-5605281 600 Cooker Hood Instruction Manual

SAFETY INSTRUCTIONS

Please read this installation and
user guide carefully before installing
and using the product, paying
special attention to the safety
instructions.
Keep the instructions for reference
or for the next owner.
Disconnect the product from the
power supply prior to cleaning or
maintenance.

• Diversion of exhaust air shall be carried out in accordance with instructions issued by the appropriate authority.
• Exhaust air may not be directed into flues that are used for fumes from items such as gas, wood or oil-burning stoves or fireplaces.
• The distance between the stove and the product must be at least 45 cm. For gas hob, the distance should be increased to 65 cm. Adjust accordingly if the stove manufacturer recommends a higher mounting height.
• For safety reasons, installation and replacement of cables or other types of connectors should only be carried out by a qualified professional.
• You must not flambé food underneath the product.
• If the hood is to be used at the same time as products that use energy sources other than electricity, i.e., gas hobs, gas, wood or oil-burning stoves or fireplaces, etc, the room must have an adequate supply of air.
• The product may be used by children from 8 years of age and persons with mental, sensory or physical impairment, or a lack of experience and knowledge, provided they are given information about how the product is to be used.
• Children should not be allowed to play with the product. Children must not undertake cleaning or maintenance of the product unsupervised.
• Accessible parts of the product may become hot when food is being prepared.
• A fire is more likely to spread if the product is not cleaned as frequently as indicated.

INSTALLATION

The cooker hood is intended for installation under, built into or between cupboards. The cooker hood is equipped with Easy Clean motor package HE (High Efficiency), LED lighting and a metal mesh filter. The cooker hood has three speeds, an intensive mode as well as a ventilation mode. Installation, use, care, maintenance etc., are described in these instructions.

TECHNICAL INFORMATION

INSTALLATION
Fixing parts, screws for mounting, etc. are supplied with the cooker hood.

Electrical installation
The cooker hood is supplied with a cable and earthed plug for connection to an earthed socket. The socket should be accessible after installation is complete.

Assembly
Remove grease filter and motor unit, see Fig. 7 and Fig. 8.

The cooker hood can be placed under, between or built into cupboards. When installed under cupboards, the cooker hood is screwed into place with four 3.8 x 30 screws, Fig. 2. When placed between or built into cupboards, the cooker hood is installed with the aid of brackets. Brackets and cooker hood must be screwed into place with eight 3.5 x 13 screws, Fig. 3. The brackets are screwed into place with the bevelled corners facing out and level with the front edge of the cupboard, Fig. 3A, or with the bracket facing the front section of the hood upper cupboard, Fig. 3B. The cooker hood is then screwed into the brackets. Reinstall motor unit and filter.

Fig. 4

Install and tape the cold draught protection in place, Fig. 4.

If the connection is Ø 125 mm, a reducing coupling sleeve must be used. The reducing coupling sleeve is taped to the cold draught protection.

Connection to exhaust flue
Connect the cooker hood with a pipe or tubing Ø160 mm.

Attention!
When using connecting tubing, the tubing must be stretched and installed directly adjacent to the connection, Fig. 5.

Removal of protective plastic
Remove all protective plastic from the filter and any other parts of the product.

INSTRUCTIONS FOR USE

A. Lighting.
B. Ventilation mode. The extractor fan runs on low speed for 60 minutes.
C. Speed 1 on fan motor.
D. Speed 2 on fan motor.
E. Speed 3 on fan motor. If the button is held in for 2 seconds, the fan switches to intensive mode. After 7 minutes, the fan motor returns to its previously set mode. The fan can be started and stopped with buttons B-E.

It is a good idea to turn on the hood before starting to cook, as this prevents cooking smells spreading into the room. Adjust the speed of the hood depending on the type of food you are preparing. If possible, allow the hood to run at a low speed for a few minutes after you’ve finished cooking. You may also wish to run the hood on the low setting when the oven is in use or after using the dishwasher.

CARE AND MAINTENANCE

Cleaning
The cooker hood should be cleaned with a damp cloth and washing-up liquid. The filter must be cleaned twice a month, with normal usage.

Remove the grease filter by opening the snap, Fig. 7. Handle the filter gently, be careful not to bend them.

Soak the filter in a solution of warm water and washing-up liquid. The filter can also be washed in a dishwasher.

Refit the grease filter after cleaning, make sure they snap firmly into place.

Fig. 8
Motor core and hood interior must be cleaned at least twice a year.

The motor core is removed by first disconnecting the contact on the side of the motor unit, Fig. 8A. Rotate the latches, Fig. 8B, that lock the motor core in place. Pull the unit outwards so that it is freed from the pins, and then downwards.

Attention!
The motor core should not be washed or exposed to moisture! The cooker hood should be cleaned with a slightly damp cloth and washing-up liquid.

One side grille is detached by lifting up the stop lug with a screwdriver and rotating the grill in the direction of FREE, Fig. 9.

REPLACEMENT OF LED LIGHTING AND LED DRIVER

Attention!
The replacement of the LED lighting and LED driver must be carried out by an authorised professional. Contact the service organisation.

If the lighting and driver are damaged, they must be replaced with an equivalent special light fixture and driver from the manufacturer or its service agent.

SERVICE AND WARRANTY

Check that the fuse is intact. Go through all the functions to check what is not working.
Contact Franke Service
Tel. +46 (0)912-40 500
www.franke.se/service

They can help you fix the problem or refer you to the nearest service agent for fast and effective service.

The product is covered by the relevant EHL provisions.

PACKAGING AND PRODUCT RECYCLING

The packaging should be deposited at your nearest recycling point.

The symbol means that the product must not be treated as household waste. It should instead be taken to a collection point for the recycling of electrical and electronic components. By ensuring that the product is dealt with in the correct manner, you are helping to prevent the adverse environmental and health effects that could arise if the product was disposed of as regular waste. For further information on recycling, contact your local authority or waste disposal service, or the store where you purchased your product.

ECO–DESIGN DIRECTIVE
The product meets and is tested in accordance with the eco-design requirements of European Regulation 66/2014.

Read More About This Manual & Download PDF:

References

• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>