SIIG CE-H27911-S1 1×2 HDMI 2.0 Splitter Over Cat6 Extender User Manual
- June 5, 2024
- SIIG
Table of Contents
SIIG CE-H27911-S1 1×2 HDMI 2.0 Splitter Over Cat6 Extender
Features
- Extends HDMI 4K@60 signals up to 230ft (70m) over CAT6/7 cable
- Support 4K@60Hz YUV 4:4:4, HDR, HDCP 2.2
- Supports one HDMI Loop-out on Transmitter
- Support EDID management
- Support audio extraction & ARC via Toslink of Receiver
- HDMI Audio Format: PCM2/5.1/7.1, Dolby & DTS 5.1
- Toslink Audio Format: PCM2, Dolby & DTS 5.1
- Built-in bi-directional IR extend
- Support RS-232 command control
- Lightning Protection, Surge Protection, ESD Protection
Package Contents
- Transmitter
- Receiver x2
- Power adapter DC 12V/2A
- Power adapter DC 5V/2A x2
- IR blaster cable
- IR Receiver cable x2
- Terminal block
- Mount kits
- User Manual
Layout
Transmitter (TX)
- Reset BUTTON: Press to restart the device
- IR in: Connect with IR receiver extension cable, please make sure the remote control used is within the effective range
- IR out: Connect with IR blaster extension cable, please get closer to the source device while using
- RJ-45: Connect to Receiver with Cat6 cable
- HDMI LOP-OUT: Connect to HDMI display
- HDMI INPUT: Connect to HDMI source
- EDID switch: Please refer to the EDID settings table.
- RS-232: for RS-232 command control.
- POWER JACK: DC 12V/2A
Receiver (RX)
- Reset BUTTON: Press to restart the device
- Audio switch: Select extract audio from HDMI Input or ARC from TV, for Toslink use.
- RJ-45: Connect to Transmitter with Cat6 cable
- Power/Signal LED: flashes when no HDMI signal is always on when HDMI signal is transmitted.
- POWER JACK: DC 5V/2A
- Toslink Output: For audio extract or ARC use
- HDMI OUTPUT: Connect to HDMI display
- IR in: Connect with IR receiver extension cable, please make sure the remote control used is within the effective range
- IR out: Connect with IR blaster extension cable, please get closer to the source device while using
EDID settings table
- Switch up for “1”
- Switch down for “0”
Switch Status|
EDID Information
---|---
| 2| 3| 4
0| 0| 0| 0| 4K@60Hz 2CH
| 0| 0| 0| 4K@60Hz 5.1CH
0| | 0| 0| 4K@60Hz 7.1CH
0| 0| | 0| 4K@60Hz HDR 7.1CH
0| 0| 0| | 4K@30Hz 2CH
| | 0| 0| 4K@30Hz 5.1CH
| 0| | 0| 4K@30Hz 7.1CH
| 0| 0| | 4K@30Hz HDR 7.1CH
0| | | 0| 1080p@60Hz 2CH
0| | 0| | 1080p@60Hz 5.1CH
0| 0| | | 1080p@60Hz 7.1CH
| | | 0| 1080i@60Hz 2CH
| | 0| | 1080i@60Hz 5.1CH
| 0| | | 1080i@60Hz 7.1CH
0| | | | 1080p@60Hz HDR 7.1CH
| | | | Auto
Auto: output a resolution compatible with all displays.
RS-232 settings
- Baud rate: 9600
- Data bits: 8
- Stio bits: 1
- Parity: 0
Dear Valued Customer
WE REALLY APPRECIATE YOUR PURCHASE thank you.
Support
- For more info or tech support: http://www.siig.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>