4K HDMI KVM Over Cat6

Extender -T

User Manual

04-1377A P/N: CE-H27811-51

FEATURES

•  Support HDMI 4K@60 4:4:4 8bits,
•  Support HDCP 2.2 & 1.4
•  Support HDR which is 4K2K@60 4:2:0 10bits
•  Extend 41%601-1z video up to 230ft/70m through a Cat6/6a/7 network cable
•  Support END learning
•  Support HDMI loop-out on Transmitter
•  Support audio extraction via Toslink of Receiver
•  HDMI Audio Format: PCM2/5.1 /7.1, Dolby & DTS 5.1
•  Toslink Audio Format: PCM2, Dolby 5.1& DTS 5.1
•  Support USB 2.0 extend for keyboard & mouse only                                                                    (support Capacitive/Resistive touch screen)
• Lightning Protection, Surge Protection, ESD Protection

PACKAGE CONTENTS

• Transmitter & Receiver
• Power adapter DC 5V/2A x2
• US8 2.0 Type-A to A cable
• Mounting kits
• User Manual

LAYOUT

Transmitter (TX)

1. POWER JACK: DC 5V/2A
2. HDMI OUTPUT: Connect to HDMI display
3. HDMI INTPUT: Connect to HDMI source
4. USB port: Connect to the USB port of PC for receiver’s Keyboard & Mouse use.
5. KVM Light:                                                                                                                             Left LED light on when USE connected to PC.                                                                      Right LED flash when USB transmission.
6. Reset BUTTON: Press to restart the device
7. RJ-45: Connect to Receiver with Cat6 cable
8. Power/Signal LED:                                                                                                                     Flash when no HDMI signal.                                                                                                          Solid blue when HDMI signal connected.

Receiver  (RX)

1. POWER JACK: DC 5V/2A
2. Toslink Output For audio extract
3. HDMI OUTPUT: Connect to HDMI display
4. USB port: For keyboard & mouse only                                                                                                        Support wireless keyboard & mouse                                                                                              Support Capacitive/Resistive touch screen
5. KVM Light: The LED only light on when the keyboard or mouse connected.
6. Reset BUTTON: Press to restart the device
7. RJ-45: Connect to Transmitter with Cat6 cable
8. Power/Signal LED:                                                                                                                 Flash when no HDMI signal.                                                                                                  Solid blue when HDMI signal connected.

EDID Learning

• The extender will auto-learning RX connected display EDID.
• If the TX loop-out connected display also, the device will use the smaller display EDID of two displays.

For example

1. Two displays are 4K@60 & 1080p@60, the extender will use 1080p@60 EDID. Two displays output resolution will be 1080p@60.
2. Two displays are 4K@60, the extender will use 4K@60 EDID. Two displays output resolution will be 41(@60.

• Please press the reset button to re-learning EDID after a display change.

APPLICATION

1. Touch screen connection

2. Mouse and keyboard connection

Blank page

Dear Valued Customer

WE REALLY

APPRECIATE

YOUR PURCHASE
-thank you-

Support

For more info or tech support

http://www.siig.com/support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>