QRP Labs Rev 1 PCB Multi Mode Transceiver Installation Guide
- June 5, 2024
- QRP Labs
Table of Contents
QRP Labs Rev 1 PCB Multi-Mode Transceiver
Product Information
Specifications
- Product Name: QMX+ PCB Rev 1 Schematics
- Component Numbering: Indicates the page number of the schematics
- Sections:
- Connectors
- SMS Power Supplies
- Microcontroller and Digital Sections
- Front Panel Board
- Receiver
- Transmitter
Product Usage Instructions
1. Connectors
Follow the schematics to identify and connect components numbered under the 0 section.
2. SMS Power Supplies
Refer to the schematics to locate and understand the power supply connections for SMS.
3. Microcontroller and Digital Sections
For the microcontroller and digital sections, ensure components under section 2 are correctly placed and connected as per the schematics.
4. Front Panel Board
Install and connect components related to the front panel board by referencing the schematics under section 3.
5. Receiver and Transmitter
Assemble and connect the receiver and transmitter components as per the schematics provided under sections 4 and 5 respectively.
Frequently Asked Questions
- Q: Can I use components from different sections interchangeably?
- A: It is recommended to use components as specified in their respective sections to ensure proper functionality and compatibility.
- Q: How do I identify the location of a specific component onthe PCB?
- A: Refer to the component numbering scheme where components numbered with the same digits indicate they are on the same page of the schematics.
QMX+ PCB Rev 1 Schematics
Note, component numbering indicates the page number of the schematics; e.g. all components numbered 1xx are on page 1 etc. R106, for example, is on schematics
Connectors
SMS power supplies
Microcontroller and digital sections
Front panel board
Receiver
Transmitter
