Lucci decor 011686 Lexicon Coolie Cage Shade Instruction Manual

: June 4, 2024
: Lucci decor

Table of Contents

Lucci decor 011686 Lexicon Coolie Cage Shade
Warranty
Installation Requirements
Safety Tips
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lucci decor 011686 Lexicon Coolie Cage Shade

Lucci-decor-011686
-Lexicon-Coolie-Cage-Shade-PRODUCT

NOTE:
This instruction manual is the installation directions for the shade only. The luminaire is sold separately, refer to the instruction manual included with the luminaire for installation directions. Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of this product. Please keep instructions for future reference.

Warranty

This product is covered by a 12-month warranty. The warranty is from date of purchase, not the date of installation.
Please retain the proof of purchase for any warranty enquiries.
Warranty will be void if there is any damage due to improper usage or modification to the product.
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.

Installation Requirements

This installation instruction is for the shade only. No electrical wiring connection or disconnection is required for installation of the shade. The service of a licensed electrician is not required.
The luminaire (sold separately) must be assembled and installed by a licensed electrician.
Lay out all the components on a smooth surface and make sure no components are missing before assembling. If parts are missing, return the complete product to the place of purchase for inspection or replacement.
Check whether the product has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.

NOTE:
There are 2 different installation directions in this instruction manual:
1st installation method: Shade only – refer to page 2
2nd installation method: Shade with Lexicon decorative ring (sold separately) – refer to page 3

NOTE:
Ensure power to the luminaire (sold separately) you are working on has been switched OFF before commencing the installation.

Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within the packaging material. If assembly is required, place the product on a smooth non-scratch surface.
Remove the decorative ring (N – included with the luminaire) and lamp holder cover (M – included with the luminaire) from the lamp holder (K – included with the luminaire).
Install the shade (L) and decorative cover (P – included with the shade) onto the lamp holder (K – included with the luminaire) and secure with the lamp holder cover (M – included with the luminaire) followed by the decorative ring (N – included with the luminaire).
Install a globe (O – not included) into the lamp holder (K – included with the luminaire). do not exceed the maximum wattage rating of the luminaire (sold separately).
Check and ensure the product is fully assembled, and all parts are secure before turning on the power. Switch the power ON to test and enjoy your new lighting product.

NOTE:
Ensure power to the luminaire (sold separately) you are working on has been switched OFF before commencing the installation.

Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within the packaging material. If assembly is required, place the product on a smooth non-scratch surface
Remove the decorative ring (N – included with the luminaire) and lamp holder cover (M – included with the luminaire) from the lamp holder (K – included with the luminaire).
Install the Lexicon decorative ring (Q – sold separately) onto the lamp holder (K – included with the luminaire) followed by the shade (L) and decorative cover (P – included with the shade) and secure everything with the lamp holder cover (M – included with the luminaire).
NOTE:
The decorative ring (N) is not required when the luminaire has been installed when the Lexicon decorative ring (Q – sold separately).
Install a globe (O – not included) into the lamp holder (K – included with the luminaire). Do not exceed the maximum wattage rating of the luminaire (sold separately).
Check and ensure the product is fully assembled, and all parts are secure before turning on the power. Switch the power ON to test and enjoy your new lighting product.

Safety Tips

Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the luminaire or product.
To avoid injury or damage to the luminaire or product, ensure that power leads and screws are secure before connecting the power.
Select a suitable location away from liquids and hazards.
To clean, wipe with a soft damp cloth. Do NOT soak or immerse the luminaire or product in water or other liquids.
Ensure that the product does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.