Rockford Fosgate P152-S Component Speakers Instruction Manual
- June 4, 2024
- Rockford Fosgate
Table of Contents
Rockford Fosgate P152-S Component Speakers
Introduction
Dear Customer,
Congratulations on your purchase of the world’s finest brand of audio
products. At Rockford Fosgate we are fanatics about musical reproduction at
its best, and we are pleased you chose our product. Through years of
engineering expertise, hand craftsmanship and critical testing procedures, we
have created a wide range of products that reproduce music with all the
clarity and richness you deserve.
For maximum performance we recommend you have your new Rockford Fosgate
product installed by an Authorized Rockford Fosgate Dealer,
as we provide specialized training through Rockford Technical Training
Institute (RTTI). Please read your warranty and retain your receipt and
original carton for possible future use.
Great product and competent installations are only a piece of the puzzle when
it comes to your system. Make sure that your installer is using 100% authentic
installation accessories from Rockford Fosgate in your installation. Rockford
Fosgate has everything from RCA cables and speaker wire to power wire and
battery connectors. Insist on it! After all, your new system deserves nothing
but the best.
To add the finishing touch to your new Rockford Fosgate image, order your
Rockford accessories, which include everything from T-shirts to hats.
Visit our web site for the latest information on all Rockford products;
www.rockfordfosgate.com
or, in the U.S. call 1-800-669-9899 or
FAX 1-800-398-3985. For all other
countries, call +001-480-967-3565 or
FAX +001-480-966-3983
If, after reading your manual, you still have questions regarding this
product, we recommend that you see your Rockford Fosgate dealer. If you need
further assistance, you can call us direct at
1-800-669-9899. Be sure to have your
serial number, model number and date of purchase available when you cal I.
Safety
Warning:
This symbol with “WARNING” is intended to alert the user to the presence of
important instructions. Failure to heed the instructions L.ll 4 WARNING will
result in severe injury or death.
Caution:
This symbol with “CAUTION” is intended to alert the user to the presence of
important instructions. Failure to heed the instructions can result in injury
or unit damage.
- To prevent injury and damage to the unit, please read and follow the instructions in this manual. We want you to enjoy this system, not get a headache.
- If you feel unsure about installing this system yourself, have it installed by a quaIified Rockford Fosgate technician.
- Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.
Specifications
-
P152-S
-
P16-S
-
P165-SE/P1 SS-SI
-
P1675-S
-
P1T-S
-
Tweeter Crossover P165-SE
-
Tweeter Crossover P1T-S
Installation
Contents
- (1) Pair Punch Series Full Range Component Speakers
- (1) Pair of grilles/trim rings
- Mounting Hardware
Installation Considerations
Before beginning any installation, follow these simple rules:
- Be sure to carefully read and understand the instructions before attempting to install these speakers.
- For safety, disconnect the negative lead from the battery prior to beginning the installation.
- For easier assembly, we suggest you run all wires prior to mounting your speakers in place.
- Use high quality connectors for a reliable installation and to minimize signal or power loss.
- Think before you drill Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle. If installation in a boat. take care not to cut or drill through the main hull.
- Never run wires underneath the vehicle. Running the wires inside the vehicle or hull area provides the best protection.
- Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.
Mounting
Mid-Bass
- Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure that the mounting location is deep enough for the speaker to fit; if mounting in a door, operate all functions (windows, locks, etc.) through their entire operating range to ensure there is no obstruction.
- Refer to the specification chart to determine the proper diameter hole to cut for your speaker model. Cutting and mounting templates can be found at www.rockfordfosgate.com.
- Mark the locations for the mounting screws. Drill the holes with a 1/8″ bit.
- Feed the speaker wires through the cutout and connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires. The speaker’s positive terminal is indicated with a”+”.
- Fit the trim ring over the speaker and mount into place using four (4) screws.
- Tighten the screws until the speaker is snug in place to prevent rattling. Do not over tighten the screws.
Mounting tab removal for some installations
-
Use pliers to break off plastic tab.
-
Break off mounting tab.
Tweeter – Discreet Dual Clamp (DOC™)
- Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure that the mounting location is deep enough for the speaker to fit; if mounting in a door, operate all functions (windows, locks, etc.) through their entire operating range to ensure there is no obstruction.
- Mark the location for the mounting hole. Drill the hole with a standard 1.75 inch (45mm) hole saw.
- With a single center screw secure the inner cup from the front of the door panel to the outer cup from back of the door panel. Tighten the screw until balanced pressure is applied to both faces of the mounting surface.
- Feed the speaker wires through the cutout and connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires. The speaker’s lead wires are indicated with a RED wire”+” and a BLACK wire “-“
- Simply snap the tweeter into place and secure with a snap on trim ring. Removal is easy if needed. The protective grille on the tweeter is non-removable and an integral part of the design.
Wiring
Standard – Integrated Concealed Crossover (ICC™)
NOTE: For the P152-S, P165-SI and P1675-S the crossover is integrated
into the basket of the mid-bass driver. This component grade crossover allows
for easy connection of the full component system without the need for an
external crossover.
- Use illustration for proper connection.
- Be sure to maintain speaker polarity.
- Connect primary tabs on Mid-Range/Woofer to Amplifier.
- Connect secondary tabs on Mid-Range/Woofer to Tweeter.
P1 T-S & P165-SE Tweeter Crossover
- Use illustration for proper connection.
- Be sure to maintain speaker polarity.
-
Adapter Plate Template -6.75″ Hole Mounting
-
Adapter Plate Template -6″x9″ Hole Mounting
-
Mounting Template
Warranty
Rockford Corporation offers a limited warranty on Rockford Fosgate products
on the following terms:
Length of Warranty
- POWER Amplifiers-2 Years
- BMW® Direct Fit Speakers – 2 Years
- All other products -1 Year
- Any Factory Refurbished Product – 90 days (receipt required)
What is Covered
- This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its possessions.
- Product purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s Distributor and not by Rockford Corporation.
Who is Covered
- This warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate Dealer in the United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of purchase.
- Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Rockford’s discretion.
What is Not Covered
- Damage caused by accident, abuse, improper operations. water, theft, shipping.
- Any cost or expense related to the removal or reinstallation of product.
- Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center.
- Any product which has had the serial number defaced, altered, or removed.
- Subsequent damage to other components.
- Any product purchased outside the U.S.
- Any product not purchased from an Authorized Rockford Fosgate Dealer.
Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and
merchantability are limited in duration to the period of the express warranty
set forth
above. Some states do not allow limitations on the length of an implied
warranty, so this limitation may not apply. No person is authorized to assume
for
Rockford Fosgate any other liability in connection with the sale of the
product.
How to Obtain Service
Contact the Authorized Rockford Fosgate Dealer you purchased this product
from. If you need further assistance, call
1-800-669-9899 lor Rockford Customer
Service. You must obtain an RA# (Return Authorization number) to return any
product to Rockford Fosgate. You are responsible for shipment of product to
Rockford.
EU Warranty
This product meets the current EU warranty requirements, see your Authorized
dealer for details.
References
- Car Stereos | Amplifiers | Mobile Sound Systems | Rockford Fosgate ®
- Car Stereos | Amplifiers | Mobile Sound Systems | Rockford Fosgate ®
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>