Rockford Fosgate M5-800X4 2018 Plus Wrangler 800 Watt 4 Channel IPX6 Element Ready User Guide
- June 1, 2024
- Rockford Fosgate
Table of Contents
Rockford Fosgate M5-800X4 2018 Plus Wrangler 800 Watt 4 Channel IPX6
Element Ready
Product Information
Specifications
- Model: M5-800X4, M5-1000X1
- Default Settings: Front Input at 12:05 for M5-800X4, Input at 01:30, Rear Input at noon, Preset OFF, Punch EQ MIN, Crossover AP (All-Pass) at 50Hz for M5-1000X1
- Base Radio and Premium Radio settings provided
- Supports factory source units with pre-tuned amplifiers
Product Usage Instructions
Amplifiers Pre-Tuned
- The amplifiers in the kit are pre-configured for optimal performance with factory source units.
- No adjustments are necessary unless using an aftermarket source unit.
C.L.E.A.N. Setup Procedure
To match the INPUT LEVEL on both amplifiers to the aftermarket source unit:
- Download the RF Connect App for test tones & instructions.
- Adjust the settings as follows:
- For M5-800X4: Front Input at 12:05.
- For M5-1000X1: Input at 01:30, Rear Input at noon, Preset OFF, Punch EQ MIN, Crossover AP (All-Pass) at 50Hz.
Base Radio Settings
- Start with BALANCE and FADER settings in a centre position, then adjust to your preference.
- For EQUALIZER, set LOW, MID, and BASS to their centred position within -/+2 dB to avoid speaker damage.
- Keep SPEED ADJUSTMENT VOLUME OFF.
Premium Radio Settings
- Follow the same procedure as for Base Radio settings but apply adjustments to the Premium Radio settings.
FAQ
- Q: Will adjusting the default amplifier settings void the warranty?
- A: Yes, adjusting the default amplifier settings will void your warranty. Please use the provided settings for optimal performance.
- Q: How do I prevent potential speaker damage when adjusting radio settings?
- A: Keep the LOW, MID, BASS settings within -/+2 dB and set SPEED ADJUSTMENT VOLUME to OFF position to prevent potential speaker damage.
AMPLIFIERS PRE-TUNED: NO ADJUSTMENT NECESSARY
- The amplifiers included in your kit are already configured for optimum performance with factory source units.
- No adjustment is needed unless using an aftermarket source unit.
- Please use our C.L.E.A.N. setup procedure to match the INPUT LEVEL on both amplifiers to the aftermarket source unit and leave the remaining amp settings as shown below.
- Download the “RF Connect” App for test tones & instructions.
Instructions
BASE RADIO
BALANCE/FADER
- Start with BALANCE and FADER settings to the centre position, then adjust to your personal preference.
EQUALIZER
- Set LOW, MID, and BASS to their centred position. Keep settings within -/+2 dB to prevent potential speaker damage.
SPEED VOLUME
- Set SPEED ADJUSTMENT VOLUME to OFF position to prevent potential speaker damage.
PREMIUM RADIO
BALANCE/FADER
- Start with BALANCE and FADER settings to the centre position, then adjust to your personal preference.
EQUALIZER
- Set LOW, MID, and BASS to their centred position. Keep settings within -/+2 dB to prevent potential speaker damage.
SPEED VOLUME
- Set SPEED ADJUSTMENT VOLUME to OFF position to prevent potential speaker damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>