FINNOVATE H2O Audio TRI Bone Conduction Headphone User Manual
- June 4, 2024
- FINNOVATE
Table of Contents
H2O Audio TRI Bone Conduction Headphone
**User Manual
**
Bone-conduction Headphone
User Manual
Schematic diagram and accessories
- Indicator light
- Type-C charging port
- Microphones
- + ”multi-function button
- “-” button Key
- Memory metal back hang
Parts list
- Bone conduction earphone
- Type-C charging cable
- Instruction Manual
Instructions
Power on
Long press the multi-function button for 3-5 seconds. When a prompt” power on”
is heard, the red and blue light alternately flashes, it means the headphone
has been powered on.
Bluetooth connection
For first time use, after turns on, the headphone will enter Bluetooth pairing
state, Search and click “X14” on the device, there is a prompt “connected” and
the indicator will light blue every 5 seconds
Change Bluetooth devices and Re-connection
Disconnect the current paired device from Bluetooth, the headphone indicator
flashes red and blue alternately, Search and click “X14” on the new device.
The X14 headphone supports automatically re-connectionthe to last paired
Bluetooth device.
Power off
Long press the multi-function button for about 3-5 seconds, the headphone
will shut down. Indicator light goes out.
How to Charge
In connected state, the phone will display the headphone battery. If the
battery icon displays red, it means the headphone is out of battery, please
connect with the original USB-charging cable (included in the package box) to
charge.
Note: 5V power supply, such as mobile phone adapters, can be used to charge.
Controls
Power on/off -Long press “+” for 3-5 seconds
Pause/Play
Double click “+” for Pause/Play
Volume +/-
- Click “+” once to Increase volume
- Click “-” once to Reduce volume
Next/Last Track
- Long press “+” for 2 seconds for Next track
- Long press “-” for 2 seconds for Last track
Answer/End/Reject Phone Call
- Double click “+” to Accept the incoming call
- Double click “+” to End the on-going call
- Long press “+” for 2 seconds to Reject the incoming call
Sin Activation
- Triple click “+” to Activate Siri
Indicator light description
- Alternating red and blue light: Pairing state
- Blue light breathing: Connected successfully
- Red light is always on: Charging
- Blue light is always on:
- Full charged Chinese and English tone switching: Bluetooth is not connected, four keystrokes to switch
Specifications
- Model: H2O Audio TRI
- Bluetooth Version: 5.0
- Support Profile: HFP/HSP/A2DP/AVRCP/ GAVDP
- Weight: 30g
- Battery: 3.7V/230mAh
- Charging Time: About 2 hours
- Play /Call Time: About 6-8 hours
- Transmittance Distance: 10m
- Waterproof Level: IPX5
- Input Voltage: 5V
Troubleshooting
Unable to Power on
Check whether the headphone is fully charged, whether the button is
misoperated, and then charge to activate.
Unable to Pair
Make sure the headphone indicator is in the alternately flashing stage of red
and blue. If it is in the breathing state of blue light, it means that the
headphone has been connected to other devices and needs to disconnect from the
currently connected device.
Can’t Re-connect to the last device
Make sure the Bluetooth has already been turned on properly.
Headphone volume is low
Check and adjust the volume of the phone. If the volume settings of both the
phone and headphones are high enough, please check whether the wearing is in
the right place. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in
conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements in
portable exposure conditions without restriction.