SuperSonic Wireless Headphones and Mic Headphone Complete Features

SuperSonic Wireless Headphones and Mic Headphones

Specifications

• BRAND: Supersonic
• EAR PLACEMENT: Over-Ear
• COLOR: Black
• CONNECTIVITY TECHNOLOGY: Wireless
• MODEL NAME: IQ-130BT- BLK
• COMPATIBILITY: iPad, iPhone, iPod, Android tablet, HDTV, laptop, MP3 player & more
• AUX: 3.5mm
• SPECIAL FEATURES: Noise Isolation
• PRODUCT DIMENSIONS: 8.9 x 6.4 x 3.3 inches
• ITEM WEIGHT: 6.7 ounces
• BATTERIES: 1 Lithium Ion battery

Introduction

You can pair your headphones with any Bluetooth device with these Supersonic Bluetooth Over-Ear Headphones with Microphone, Black, for crystal-clear listening. Deep, increased bass, as well as clear mids and highs, are provided by full-range drivers. They work well for listening to all types of music.

HOW TO PAIR

Quantum Sonic can be found by using the Bluetooth® feature on your smartphone. To connect the earphones to your device, press “Quantum Sonic.” After that, an audible “Left/Right Connected” voice will be heard, followed by an audible “Connected” voice. Now that both earphones are attached to your device, they are prepared to receive a Bluetooth® signal.

HOW TO SETUP

• Open the settings first.
• Tap Connections after that.
• Next, tap Bluetooth.
• In the top-right corner of your screen, select Scan.
• Next, hold down the power button on your headphones for a few seconds.
• Find your headphones and tap them at the end.

HOW TO CHECK BATTERY PERCENTAGE

• Activate the “Settings app.”
• Go to “Bluetooth & other devices” after opening the page “Devices”.
• Locate your device in the list under “Mouse, keyboard, & pen” on the right.
• The battery level indicator will be visible next to the device name.

HOW TO AMPLIFY

Place two amplifiers close to one another, with each one connected to a different pair of headphones. Press and hold the MF button on both devices at the same time for three to five seconds. Release when the ORANGE LED on both devices begins to flash. Now that both amplification devices are in sync, pairing is possible.

HOW TO TURN OFF

The Bluetooth headset’s primary button should be pressed and held for a few seconds. Your Bluetooth headset will suddenly turn off after a brief period of an LED light blinking on and off.

HOW TO CONNECT TO PHONE

• From the top of the screen, swipe downward.
• Touch Bluetooth and hold it.
• To pair a new device, tap. If Pair new device isn’t there, go under “Available devices” or hit More. Refresh.
• Select the Bluetooth device you want to associate with your device by tapping its name.
• Observe any directions displayed on the screen.

Frequently Asked Questions

How can I tell whether my wireless headphone battery is full?

It often has a red charging indicator light. The battery is fully charged when the light goes off, indicating. You must learn how to charge a Bluetooth headset properly, that is, just when the battery is running low, if you want to get the most life out of it.

Why won’t my phone and Bluetooth headphones pair?

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

How can I find out how much battery life my Bluetooth headset has left?

Simply pair and connect the Bluetooth gadget to your phone is all that is required. After doing so, launch the Settings app and select Connect Devices. Click Bluetooth (not the switch next to it). With certain exclusions, you will receive a complete list of all connected devices along with their current battery levels.

How long does the initial charging of a Bluetooth headset take?

While the headset is on, avoid charging it. Before using the headset for the first time, it must be charged for at least 30 minutes. Once the headset has received a full charge, it can be left in the charger without risk of damage.

How can I check the battery’s charge?

By going to Settings > Battery > Battery Usage, you can check your Android phone’s battery level.

Can I use a mobile charger to charge my Bluetooth headphones?

Yes, you may charge your Bluetooth headphones with a mobile charger. The USB cables will meet your charging needs and are constructed in accordance with the USB standard.

How can I get my phone’s battery level to show?

Open the Battery menu in the Settings app. An option for Battery Percentage will be available. Toggle it, and the percentage will always be visible in the top-right corner of the Home screen.

What distinguishes wireless headphones from Bluetooth headphones?

The method of connecting the headphones to a media player is the main distinction. Wireless headphones can communicate audio signals via radio waves, infrared, internal memory, or KleerNet, as opposed to Bluetooth headphones, which do so using short-range radio waves.

Do Bluetooth headphones have an automatic off function?

Furthermore, Bluetooth headphones are inefficient energy users. So as to help with energy conservation, they will turn themselves off when not in use. The device might also shut off on its own when the battery runs out. When not in use, the Bluetooth headphones are set to shut off.

How long does it take a wireless headset to charge?

Expect it to take between two and three hours for over-ear Bluetooth headphones to charge from empty to full. To fully charge the earphones and the case for Bluetooth headphones, allow one to one and a half hours.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>