Quest Usa B083TQTSMH Wireless Charging Desktop Stand and Pen Holder User Manual
- June 6, 2024
- Quest Usa
Table of Contents
WIRELESS CHARGING
DESKTOP STAND & PEN HOLDER
WIRELESS CHARGING STAND
USER MANUAL
The Only Desk Accessory You Need.
Eliminate messy cords and keep your desk organized with this multi-function
desktop charging station. Charge your smartphone wireless/y by simply dropping
it on the stand.
Includes 2 US8 ports to charge your other devices and a built-in pen holder to keep your space even more organized.
Compatible with all Qi-enabled smartphones.
- Charges up to 3 devices at once
- Dual US8 Port
- 5wont Qi Certified
WIRELESS CHARGING
DESKTOP STAND & PEN HOLDER
Product Specifications
- Product Standard: Qi Standard V1.2.4
- Qi Registration ID 4422
- 5 Watt Power
- Input 5V/2A
- Output 5V/2A
- Wireless Output 5V/1A
- 2 USB Ports
- USB-C Charging input
Using Your Wireless Charger
Steps on how to charge your devices.
IMPORTANT: Please remove the protective film from the wireless stand before use.
- Wireless Stand is compatible with all Qi-Enabled Smart Phones.
- Connect the supplied USB-C cable to the back of the charging stand into the USB-C input port.
- Connect the USB end into any PC or optional wall head.
- Once the stand is powered on the LED indicator will turn Red.
- Only place a Wireless enabled Smart Phone on the stand, and the LED indicator will turn blue while charging.
- If you do not see a blue light adjust your phones’ position until you see a steady blue
- The charging stand is also equipped with 2 USB ports on the back, this will allow you to charge an additional 2 devices at the same time. To use the USB ports on the back simply use the cable that came with your device and plug the USB end into the USB port and the other end into your smart device, and your device should automatically start charging.
- For a quick charge, a QC 3.0 wall head is required.
Product Diagram
- Important: only use included accessories or certified and tested accessories to charge this Using third-party accessories can influence the product safety.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.