ERIA BR30 Zigbee Smart LED Lights User Manual
- June 3, 2024
- ERIA
Table of Contents
USER MANUAL
SMART LED LIGHTS
WHITE TUNABLE BULB
BR30 Zigbee Smart LED Lights
The ERIA White Tunable Smart Bulb offers multiple white tones of color
temperature, to let you choose whatever mood you want.
Easily controlled via your smartphone/tablet, or an ERIA Wireless Remote, even
by Voice Assistant as Amazon Alexa and Google Assistant. Simply use an
AduroSmart ERIA hub or a ZigBee-compatible gateway.
http://www.adurosmart.com/manuals/softwhitebulb
-
Unpack your bulb and screw it into your light fitting and turn on the light,
-
Connect with the ERIA hub
2A. Download the Adurosmart App from the Apple App Store or from Google Play or go to http://adurosmort.com/odurosmart-app/
https://itunes.apple.com/us/app/adurosmart-smart-home/id1356891990?
2B. If you have a third-party ZigBee-compatible hub then proceed to step -
Open the AdvroSmort ERR App.
-
On the bottom right corner prey on “Settings”.
-
Select “Devices”.
-
In, the top right corner press on the “+” symbol then press on “Add device-.
-
Press On “Brands” and then select “AnduroSmart ERIA”.
-
Press on “White Tunable Bulb”
-
Switch the power to the light ON/OFF S times to initiate the pairing mode. the bulb will flash once indicating that it has entered pairing mode. The pairing mode will last 60 seconds.
9B.lf you have a third-party hub, then this is the moment to initiate the search from your Smart Home hub app. -
Proceed by pressing on ‘Search’ to allow the ERLA hub to find the bulb. the LED indicator on the hub will flash green this indicates that the hub is searching for devices.
-
When the bulb has been found and paired successfully it will turn green and it will show up in your search results, press on “Done” to complete the process.
This device complies with port 15 of the FCC Rules. Operation is subject lc
the following two conditions: (1) This device may not cause harmful
interference. and (2) this device must accept any interference received.
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limit:
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates. uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However. there is no guarantee Shot interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception. which can be determined by
turning the equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from the Shot to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The distance between the user and the products should be no less than 20cm.
NEED HELP? CALL US
For troubleshoots, Instruction videos,s or more information
please visit us at www.adurosmart.com/faq
Chat with one of our support agents at
www.adurosmart.com
(844)602-3069 Exit.1
Para Usuctios Mexicanos: 018008777777
support@adurosmarl.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>