ERIA 81848EU Smart plug Lighting Remotes User Manual
- June 5, 2024
- ERIA
Table of Contents
ERIA 81848EU Smart plug Lighting Remotes
- Add your smart plug to the ERIA hub. Open the AduroSmart ERIA app, Press on “Settings” press on “Devices” and on the top in the right corner press on “+” press on “Plugs
- To initiate the pairing mode press the button on fop of the smart plug for 2 sec, the LED indicator will blink slowly for 60 sec to indiciate that the smart plug is in pairing mode.
- After stuffing the smart plug info pairing mode press research once the smart plug is successfully added if will show up in the Adurosmart ERlA app.
- Touch link your smart plug with a ZigBee-enabled touchline remote: Move your touchline remote within 10 cm from the AduroSmart ERIA smart plug and inifiate the touchline procedure according to your touchline-enabled remote instructions.
- Trouble Shooting: When the smart plug does nof enter pairing mode, fhan reset the plug to factory default by pressing the button on top ot tne smart plug tor 10 seconds once the smart plug is set back fo factory detaultIT Will link shortly. The LED will blink tast i0 Times to conhirm he reser.
LED FUNCTION TABLE
Factory reset| Press the button on top of the smart plug for 10 sec untill the
LED indicator blinks fast 10 times.
---|---
lnnitiate pairing mode| Press the button on top of the smart plug for 2 sec,
the LED indicator will blink slowly for 60 sec to indiciate that the smart
plug is in pairing mode.
LED INDICATOR TABLE
Connection mode| LED will blink once per second for approximately 1 min.(After
1 min the LED will stop blinking.)
---|---
Connection successfully| LED will stop blink.(The App will also indicate when
the connection is successful.)
Sensor reset| LED will blinkfast.(For 10 times.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>