MVMT EBT6-21152 TWS Earbuds with Charging Case Instruction Manual
- June 3, 2024
- MVMT
Table of Contents
EBT6-21152 TWS Earbuds with Charging Case
**Instruction Manual
INSTRUCTION MANUAL:
EBT6-22152
TWS Earbuds with Charging Case
**
EBT6-21152 TWS Earbuds with Charging Case
TURN ON
Take the two earbuds out of the charging case. They will automatically turn
on. Once the earbuds have powered up, you should hear a sound indicating that
they have automatically connected with one another.
TURN OFF
Long press the control button until LED turns red to indicate not in use, this
will turn off your device. Earbuds will turn off automatically if away from
case for more than 5 mins.
BLUETOOTH CONNECT
- Power the device on. The earbuds will pair with one another automatically when they are turned on.
- Turn on your device’s Bluetooth from the Bluetooth menu and select “MV-EB5575”.
- When paired successfully the device will make a tone to confirm the connection has been made to your device.
- Remember to turn the earbuds off after each use to ensure the longest play time.
Note: The earbuds will reconnect automatically if your device has been paired previously. Depending on your device’s type and configuration, manual reconnection may be required each time.
CHARGING
- EARBUDS: Just place the earbuds into the charging case. The earbuds will automatically enter charging mode if the cradle is charged or connected to the power supply. The earbuds will display a red LED light while they are charging, and turn off when they are fully charged.
- CASE: Use the cable provided to connect the charging case to the power supply.
FUNCTION KEYS
- PL AY/STOP MUSIC : When playing music, quickly press either earbud’s control button.
- MUSIC CONTROL: Triple press left earbud to increase volume, and right to decrease. Long press left for the next song, right for the previous song.
- ANSWERING CALL : When a call is received, briefly press either earbud’s control button once. To hang up, briefly press once again.
- REDIAL: Double press either the earbud’s control quickly to dial the last number on your list.
- DECLINING CALL: When playing music, press and hold the control button for 1.5 seconds*.
Note: If you hold the control button for 3 seconds earbuds will power down.
FCC Disclaimer:
This device Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help or assistance.
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RS5 standard(s). Operation is subject to the following two conditions;
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic device is to be collected
separately.
This product is designated for separate collection at an appropriate
collection point. Do not dispose of as household waste.
If the device uses batteries, they must be removed from the device and
disposed of in an appropriate collection center.
If the batteries cannot be removed, do not attempt to do it yourself since it
must be done by a qualified professional.
Separate collection and recycling help conserve natural resources and prevent
negative consequences for human health and the environment that might result
from incorrect disposal.
PARAMETERS
- Bluetooth version: 5.0
- Frequency: 24 0 2 – 24 8 0 M hz
- Battery capacity: 30mAh each
- Total playtime*: 3 hours (16 hours with case)
- Total standby time: 50 hours
- Bluetooth range: Up to 30 ft
CHARGING CASE
- Battery capacity: 300mAh
- Charging time: 2 hours
- USB type-C charging
The device has been evaluated to meet the general RF exposure requirement. The
device can be used in portable exposure conditions without restriction.
*Depends on individual use
Warning: To prevent possible hearing damage, do not listen at high volume
levels for long periods.
©2022 Argento SC, All Rights Reserved. Distributed by Argento SC, New York, NY
10018. Designed in New York. Made in China.
MVMT and MVMT logo are registered trademarks of Argento SC.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Argento SC is under license.
www.argentosc.com
[email protected]
WARNING: The artwork and design of this package are protected by United
States Copyright law and may not be reproduced, distributed, displayed,
published, or used for any purpose without prior written permission. You may
not alter or remove any trademark or copyright notice from this package.
Because of continuous improvements, images and product specifications on
packaging may differ slightly from the actual product.
FCC ID: 2A3ZO-EBT6-21152
Documents / Resources
| MVMT
EBT6-21152 TWS Earbuds with Charging
Case
[pdf] Instruction Manual
EBT6-21152, EBT621152, 2A3ZO-EBT6-21152, 2A3ZOEBT621152, EBT6-21152 TWS
Earbuds with Charging Case, Earbuds with Charging Case, Earbuds
---|---