MVMT EB5585 True Wireless Earbuds Instruction Manual
- June 9, 2024
- MVMT
Table of Contents
MVMT EB5585 True Wireless Earbuds
TURN ON
Take the two earbuds out of the charging case. They will automatically turn on. Once the earbuds have powered up, you should hear a sound indicating that they have automatically connected with one another.
TURN OFF
Long press the control button until LED turns red to indicate not in use, this will turn of your device. Earbuds will turn of automatically if away from case for more than 5 mins.
BLUETOOTH CONNECT
- Power the device on. The earbuds will pair with one another automatically when they are turned on.
- Turn on your device’s Bluetooth from the Bluetooth menu and select “MV-EB5585”.
- When paired successfully the device will make a tone to confirm the connection has been made to your device.
- Remember to turn the earbuds of after each use to ensure longest play time.
Note: The earbuds will reconnect automatically if your device has been
paired previously.
Depending on your device’s type and configuration, manual reconnection may be
required each time.
CHARGING
- EARBUDS: Just place the earbuds into the charging case. The earbuds will automatically enter charging mode if the cradle is charged or connected to the power supply. The earbuds will display a red LED light while they are charging, and turn of when they are fully charged.
- CASE: Use the cable provided to connect the charging case to the power supply.
VOICE ASSISTANT
To activate the voice assistant (e.g., Siri), triple press the right earbud’s control button.
FUNCTION KEYS
-
PLAY/STOP MUSIC : When playing music, quickly press either earbud’s control button.
-
VOLUME CONTROL : Double press right earbud to increase volume, and left to decrease.
-
ANSWERING CALL : When a call is received, briefly press either earbud’s control button.
To hang up, briefly press once again. -
DECLINING CALL : When playing music, press and hold control button for 2 seconds*.
Note: If you hold control button for 3 seconds earbuds will power down.
PARAMETERS
- Bluetooth version : v5.1
- Bluetooth range : Up to 30 ft (10 m)
- Frequency range : 24 0 2 – 2480 MHz
- Battery capacity : 30 mAh each
- Speaker driver : 13 mm 32 Ω
- Speaker sensitivity : 105 dB ± 3 dB
- **Total playtime*** : 3 hours (15 hours with case)
- Total standby time : 80 hours
CHARGING CASE
- Battery capacity : 250 mAh
- Charging time : 2 hours
- USB Type-C charging
FCC Disclaimer
This device Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including Interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or on experienced radio/TV technician for help or assistance.
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RS5 standard(s). Operation is subject to the following two conditions;
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic device is to be collected separately.
- This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
- If the device use batteries, they must be removed from the device and disposed in a appropriate collection center.
- If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
- Separate collection and recycling helps conserve natural resources and prevent negative consequence for human health and the environment that might result from incorrect disposal.
©2023 Argento SC, All Rights Reserved.
Distributed by Argento SC, New York, NY 10018. Designed in New York. Made in
China.
MVMT and MVMT logo are registered trademarks of Argento SC. The Bluetooth®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Argento SC is under license.
www.argentosc.com
support@argentosc.com
WARNING: The artwork and design of this package are protected by United States Copyright law and may not be reproduced, distributed, displayed, published, or used for any purpose without prior written permission. You may not alter or remove any trademark or copyright notice from this package. Because of continuous improvements, images and product specifications on packaging may differ slightly from actual product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>