minbie Hospital Grade Double Breast Pump User Manual
- June 4, 2024
- minbie
Table of Contents
- CHARGE PUMP BATTERY FOR 4.5 HOURS
- PREPARATION FOR USE
- WASH THESE ITEMS THAT COME INTO CONTACT WITH YOUR BREAST MILK
- HOW TO ASSEMBLE THE SHIELDS
- ASSEMBLE THE DIAPHRAGM AND WHITE CAP
- ATTACH THE BOTTLE FIRMLY TO THE SHIELD BODY
- INSERT WHITE TUBE ENDS
- SINGLE PUMPING
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Double Pump Illustrative Guide
The Pump Instruction Manual must be read before
using the Pump.
CHARGE PUMP BATTERY FOR 4.5 HOURS
To assist the battery life: recharge the battery when possible, even after
each use. Never let the battery run flat.
Turn the pump off when not in use.
PREPARATION FOR USE
Gently peel-off the thin protective layer of film that’s on the face of the
pump.
DO NOT WASH THESE ITEMS only wipe down with sterile wipes or clean damp
cloths.
WASH THESE ITEMS THAT COME INTO CONTACT WITH YOUR BREAST MILK
-
WASH IN WARM SOAPY WATER
-
RINSE IN FRESH WATER
-
STERILISE & AIR DRY
We recommend the Minbie steam Steriliser or Minbie UV Steriliser. All pump items must be sterile and completely dry before use.
HOW TO ASSEMBLE THE SHIELDS
Push the silicone shield into the shield body.
Hold the thicker part of the silicone shield above the valve and connect it
inside the shield body and then connect the silicone shield around the rim.
ASSEMBLE THE DIAPHRAGM AND WHITE CAP
ATTACH THE BOTTLE FIRMLY TO THE SHIELD BODY
INSERT WHITE TUBE ENDS
Make sure the tube connectors are attached firmly