ergotron 98-548-251 CareFit Combo CPU Tray User Guide
- June 4, 2024
- ERGOTRON
Table of Contents
ergotron 98-548-251 CareFit Combo CPU Tray User Guide
Tools Needed
What Is In The Box
| A | B | C | D | |
|---|---|---|---|---|
| 1 |  |  | ||||
| 2 | 
content/uploads/2022/08/Screenshot_10-357.png)
Weight Capacity:
CAUTION:
DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
Assembly Instruction
Adjustment Step
Important:
You will need to adjust this product after installation is complete. Make
sure all your equipment is properly installed on the product before attempting
adjustments. This product should move smoothly and easily through the full
range of motion and stay where you set it. If movements are too easy or
difficult or if product does not stay in desired positions, follow the
adjustment instructions to create smooth and easy movements. Depending on your
product and the adjustment, it may take many turns to notice a difference. Any
time equipment is added or removed from this product, resulting in a change in
the weight of the mounted load, you should repeat these adjustment steps to
ensure safe and optimum operation.
**Lift – Up and down
**
-
Increase Lift Strength If the mounted weight is too heavy or this product does not stay up when raised, then you’ll need to increase Lift Strength:
-
Decrease Lift Strength If the mounted weight is too light or this product does not stay down when lowered, then you’ll need to decrease Lift Strength:
Safety
Caution: Leave enough slack in cable to allow full range of motion.
To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury
For the latest User Installation Guide please visit:
www.ergotron.com
For Warranty visit:
www.ergotron.com/warranty
For local customer care phone numbers visit: http://contact.ergotron.com
NOTE: When contacting customer service, reference the serial number.
