HOMCOM 820-200 Heating Cover Instruction Manual
- June 4, 2024
- HOMCOM
Table of Contents
HOMCOM 820-200 Heating Cover
Product Information
Specifications
- Model: DE_I IN231100215V01_GL 820-200
- Languages: EN, FR
- Includes various components with corresponding numbers and sizes
Product Usage Instructions
Assembly Guidelines
- Carefully read and understand all instructions before assembly.
- Identify and organize all components based on the provided numbers and sizes.
- Do not confuse similar screws during assembly.
- Do not tighten bolts fully until all parts are connected.
Wall Mounting Instructions
- Determine the appropriate wall type for mounting.
- For solid walls, use both expansion and self-tapping screws. For wooden walls, use only self-tapping screws.
- Avoid over-tightening the screws to prevent damage.
Usage Flexibility
This product can be fixed to the wall based on your needs. It can be used or not according to your preferences.
FAQ
Q: What should I do if I encounter similar screws during assembly?
A: Take extra care to differentiate between similar screws to ensure proper assembly.
Q: Can I use the product without mounting it on the wall?
A: Yes, the product can be used with or without wall mounting, depending on your requirements.
Q: How should I determine the type of screws to use for wall mounting?
A: For solid walls, use both expansion and self-tapping screws. For wooden walls, use only self-tapping screws.
Tools Recommended
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center.Our contact details are
below:
US
Phone
001-877-644-9366
Email
customerservice@aosom.com
USING CAM LOCK AND QUICKFIT
QUICKFIT:Tighten quickfit until shoulder is flush with panel.Do not overtighten or undertighten.
CAM LOCK:When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.
Quickfit head should be in the centre of the cam lock when the two panels are joined.
Turn cam lock clockwise to tighten.
PARTS
HARDWARE
NOTE
Do not confuse similar screws.Do not tighten bolts fully until all parts are
connected!
INSTALLATION
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>