WELTER 48089 Weight Light Duty Scooter Lift Instruction Manual
- June 4, 2024
- WELTER
Table of Contents
WELTER 48089 Weight Light Duty Scooter Lift
INTRODUCTION
The Welter Weight Lift is a perfect lift for lightweight folding mobility devices. The Welter Weight can be installed onto the hitch of any vehicle allowing it to be set inside the vehicle when not in use & attached to the hitch when needed. Also, the Welter Weight can be installed inside the vehicle with no need for tools in some cases. The Hitch Adaptor is height adjustable and allows for a full range of motion (swivels)–so you can use it with your Car, Truck or SUV with a Hitch setup. The Welterweight Lift Plug directly into your Scooter or Power Wheelchair.
FEATURE
CAPACITY
- Maximumloadcapacity88lbs
- AutomaticUPandDown
- ExteriorMount(hitch mounted)/InteriorMount(SnapIn)
- Swing boom
- Foldingandremover-ableboom
- Welter can be fixed or removed
- Multiple power option
- Remote Control option
- Parcel Shelf can be used
- Easy Vehicle transfer
KEYSAFTYPOINTS
- WARNING! Welter must never be operated by a child or a person not deemed appropriate! To operate the equipment.
- WARNING! Welter should always be fully secured before operating.
- WARNING! Never use a system that shows signs of damage.
- WARNING! Do not exceed maximum loading capacity.
- WARNING! Misuse of the Welter may result in serious injury.
SPECIFICATIONS
Exterior Mount (Hitch mounted)
Component Description
Assembly
Before Installation: MakesurevourvehicleshaveaClass|lorll|Hitch.
Interior Mount (SnapIn)
Component Description
Assembly
- Connect and secure the power cable to the boom to the wheelchair or mobility scooter battery.
- Press & hold the down button to lower the hoist
- Connect the lifting hook securely to the scooter.
- Press and hold the up button to raise the scooter above the floor of the vehicle. , steadying the scooter to ensure it does not contact the vehicle.
- Carefully swing the boom inwards.
- Press & hold the down button to lower the lift until the scooter is firmly placed on the vehicle floor.
- Remove the lifting hook from the scooter.
- Press and hold the up button to retract the lifting strap and hook. Always stop retracting leaving 3 inches of strap out from the end of the boom.
- Disconnect the power supply.
- Lower the power boom arm and remove it from the boom base by lifting on the release leaver and lifting the boom straight up.
- Stowaway the boom arm securely and close the boot.
Discover Your Mobility Inc.
11055 E Nine Mile Rd
Warren Mi. 48089
866-868-9694