Lucci 039266 Chrysler Conical Shade Instruction Manual

Lucci 039266 Chrysler Conical Shade

Important Information

CHRYSLER CONICAL GLASS SHADE

NOTE: This instruction manual is the installation directions for the shade only.The luminaire is sold separately, refer to the instruction manual included with the luminaire for installation directions.

To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of this product. Please keep instructions for future reference.

Warranty

• This product is covered by a 12-months warranty valid for in-store replacement or refund only.
• The warranty is from date of purchase, not the date of installation.
• Please retain the proof of purchase for any warranty enquiries.
• Warranty will be void if there is any damage due to improper usage or modification to the product.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.

Installation Requirements

• This installation instruction is for the shade only. No electrical wiring connection or disconnection is required for installation of the shade. The service of a licensed electrician is not required.

• The luminaire (sold separately) must be assembled and installed by a licensed electrician prior to installing this shade.

• The luminaire (sold separately) must not be used if the lamps has been damaged or cracked. Replace the lamp shade before using the luminaire (sold separately).

• Check whether the product has been damaged during transport. Do not operate/install any product which appears
  damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.

• Ensure power to the circuit you are working on has been switched OFF.

Luminaire Compatibility

This shade is compatible with the following luminaires (sold separately):
Chrysler Suspensions – SKU# 039210, 039211, 039212, 039213, 039214, 039215
Chrysler DIY Batten Fix – SKU# 099149, 099150, 099151
Chrysler Wall Brackets – SKU# 039268, 039269, 039270, 039271
Chrysler Luminaires – SKU# 039237, 039238
*NOTE: As this glass shade is open at the base, the above Chrysler Wall Brackets and Luminaires will no longer be IP44 rated when used in conjunction with this shade.

Installation Directions

NOTE: Ensure power to the luminaire (sold separately) you are working on has been switched OFF before commencing the installation.

1. Install the glass shade (E) onto lamp holder cover (A – included with the luminaire, sold separately) and secure by tightening the 3 nuts (B – included with the luminaire, sold separately).
   NOTE : Do not overtighten the nuts (B) as this may crack and damage the glass shade.

2. Instal a globe (D – not included) into the lamp holder (C – included with the luminaire, sold separately). Do not exceed the maximum wattage rating.

3. After the installation, switch on the luminaire to test and enjoy your new lighting product.

Safety Tips

• Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the luminaire or product.
• The luminaire (sold separately) must not be used if the lamps hade has been cracked or damaged. Replace the lamp shade before using the luminaire (sold separately).
• To avoid injury or damage to the luminaire or product, ensure that power leads and screws are secure before connecting the power.
• Select a suitable location away from liquids and hazards.
• To clean, wipe with a soft damp cloth. Do NOT soak or immerse the luminaire or product in water or other liquids.
• Ensure that the product does not come into contact with corrosive chemicals/solvents or abrasive cleaners etc.

Specifications

Specifications

SKU#| 039266| 039267
Glass Finish| Gloss Opal Glass| Clear Glass
Luminaire Compatibility| Chrysler Suspensions – SKU# 039210, 039211, 039212, 039213, 039214, 039215
Chrysler DIY Batten Fix – SKU# 099149, 099150, 099151
Chrysler Wall Bracket s – SKU# 039268, 039269, 039270, 039271
Chrysler Luminaires – SKU# 039237, 039238
Shade Weight| 1.0kg
Shade Dimensions| H:250mm   Dia:275mm

*NOTE: As this glass shade is open at the base, the above Chrysler Wall Brackets and Luminaires will no longer be IP44 rated when used in conjunction with this shade.

Documents / Resources

| Lucci 039266 Chrysler Conical Shade [pdf] Instruction Manual
039266 Chrysler Conical Shade, 039266, Chrysler Conical Shade, Conical Shade, Shade
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>