equip 351022 Barcode Scanner Installation Guide
- June 20, 2024
- equip
Table of Contents
Quick Installation Guide
Barcode Scanner
351022 USB 1D Laser Barcode Scanner, with Stand
351022 Barcode Scanner
** Please download the detailed User Manual from equip website: https://www .equip-info.net/ for more information.
Specification
| Compatible operating systems | WIN XP/7/8/9/10/11 , Android , IOS , LINUX |
|---|---|
| Scan Distance | 700mm |
| Depth of Field | 0~75mm (13mil EAN13 PCS 90%) |
| Scan Angle | Horizontal: 70°，Vertical : 70° |
| Light Source (color) | Red LED 650nm±10% |
| Protection | IP54 |
| Trigger Mode | Manual, Continuous Scan, Auto-induction Scan |
| Scan Speed | 200 Scans / per sec |
| Connection mode | Wired |
| Decoding Type 1D | Code128、EAN-13、EAN-8、Code39、UPC-A、UPCE、Codabar、Interleaved2 |
of 5、ISBN/ ISSN、Code93、Code11、UCC/EAN-128、GS1 Databar
Operating humidity| 5% RH ~ 95% RH （no-condensing）
Operating temperature| -20°C ~ 60°C
Storage temperature| -30°C ~ 80°C
Dimensions (W x D x H)| 70 x 79 x 173 mm
Cable length| 1.8M
Product weight (kg)| 0.106
Power supply| USB DC 5V / 100mA
Resolution| ≥4mil
Product Diagram
Package Content
- 1 x Barcode Scanner
- 1 x Quick Installation Guide
- 1 x Holder Stand
- 1 x USB-A to RJ45 Cable
- Scan window
- RJ45 connection
- Anti-drop silicone
- Indicator light
The basic setting
- Reset to Defaults
- Firmware Version
- Buzzer
- Auto-sensor
- Interfaces
- Keyboard Language setting
- Trigger Mode
- Suffix/Prefix Function
Notes:
- Do not look directly at or illuminate by means of an instrument (telescope)!
- Do not remove the baffle on the lens guard and avoid exposure to the eyes!
- Please work with professional staff when it needed disassembled, adjusted or repaired!
- Do not disassemble, impact, squeeze, or put into fire or water. If there is a serious bulging, please do not continue to use. Do not put it in high temperature!
Reading Skills
In order to obtain good reading effect, the target beam projected by the
viewfinder should aim at the center of the barcode, but
can be aimed in any direction for reading.
Aim at the barcode and press the trigger to make the target beam in the middle
of the barcode.
The closer to the barcode, The beam becomes smaller farther away from the
barcode, The beam becomes larger. If the bar code is small, the scanner should
be close to the barcode. If the barcode is larger, the scanner should be
further away from the barcode, making it easier to read the barcode correctly.
If the barcode is high in reflectance (for example, coated), you may need to
tilt the scanner at an Angle to successfully scan the barcode.
Cable removal
- Find the cable removal hole which is under the scanner.
- Insert a pin into the hole and press the paper clip to pull the cable from the bar code scanner.
Simple-maintain
- The stains and dust on the scan window will be affect the scanner’s working. When cleaning, you should use good quality facial tissue to wipe gently. Then blow it clean with a blown balloon. If you use poor paper to clean for a long time, it will damage the surface of the scanning window and affect the reading effect of the scanner.
- The casing of the scanner can be wiped with a clean soft cloth. If needed, use a little detergent to add water and rub it with a soft cloth.
DIGITAL DATA
Communications
DECLARATION OF CONFORMITY
THIS DECLARATION OF CONFORMITY IS ISSUED UNDER THE SOLE RESPONSIBILITY OF:
Name and address of
manufacturer:| Digital Data Communications GmbH
Im Defdahl 10F, 44141 Dortmund, Germany
---|---
Product identification:| Barcode Scanner
Product number:| 351022
THE PRODUCTS MENTIONED IN THIS DECLARATION ARE IN CONFORMITY WITH:
EU / UK Legislation| Restriction of Hazardous Substances (RoHS) Directive
2011/65/EU – including (EU) 2015/863
UK Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012
ElectroMagnetic Compatibility (EMC) Directive 2014/30/EU
UK Electromagnetic Compatibility Regulations 2016
1907/2006/EC (REACH)
---|---
Harmonised standards| Electromagnetic Compatibility (EMC)
IEC 62321-3-1:2013
IEC 62321-5:2013
IEC 62321-4:2013+AMD1:2017
IEC 62321-7-1:2015
IEC 62321-7-2:2017
IEC 62321-6:2015
IEC 62321-8:2017
SIGNED FOR AND ON BEHALF OF:
| Place and date of issue: | Dortmund, December 26, 2023 |
|---|---|
| Signature: | |
| Name, function: | Amanda (Shu-Wen) Chen, CEO |
| Company name: | Digital Data Communications GmbH |
WEEE: Dispose of the product at a recycling point. Do not dispose of
together with household waste. Incorrect storage/disposal can harm the
environment and/or cause injury.
CE, UKCA: Equip declares that this product complies with the directives listed
in the section ‘Declaration of Conformity’.
Support.eu@equip-info.net
Support.asia@equip-info.net
Equip® is a registered trademark of Digital Data Communications GmbH ©
Copyright Digital Data Communications GmbH. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>