SUNCO LIGHTING NL-WH-2760K 4 LED Retrofit Nightlight User Manual

SUNCO LIGHTING NL-WH-2760K 4 LED Retrofit Nightlight

What’s in the Box?

Retrofit Downlight

| |
---|---|---
Light Fixture| TP24 Connector| E26 Base

Before You Start

Safety Information

To reduce the risk of fire, electric shock, or physical injury:

• Turn off circuit breaker before installing this fixture.

• Professional installation required. Safety gear recommended.

• Abide by regional and local laws or regulations.

• Proper grounding is required to ensure safety.

• Do not alter, or remove wiring during installation.

• Do not make or alter any open holes in wiring enclosure or electrical components during installation.

• Check for shipping damage before installing. If the product is damaged, do not use it.

• Keep fixture away from corrosive substances.

• Clean the fixture regularly to ensure proper operation.
  Do not clean with harsh solvents.

• Suitable for damp locations at temperature ranging from 4°F to 104°F. Not for use where directly exposed to water.

• Use safety precautions and abide by regional and local laws or regulations.

• This product is not compatible with 3rd party sensors.

• This product is not compatible with photo controls.

• This product is not compatible with occupancy sensors.

• This product is not compatible with timing devices.

WARNING:

Cancer & Reproductive Harm- www.P65Warnings.ca.gov

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.

Quickstart Guide

Step 1
Locate the recessed housing.

Step 2
Determine type of connector available.

Step 3
Thread the adapter to make connection.

Step 4
Push downlight into can until secure.

Installation Guide

STEP 1

a. Turn off circuit breaker before installation.
b. Locate the housing.

NOTE: Remove previous fixture. Fixture may be hot so allow time to cool after turning off power.

STEP 2

Determine the type of connector available.
-TP24 Connector(1)
-E26 Base(2)

STEP 3

a. Thread the appropriate adapter to make connection in the housing.
NOTE: the wires may come lose from the connectors so ensure they are attached.
b. Tuck all wires into the can.

STEP 4

Note: This step applies only to the Selectable Retrofit.

a. Slide CCT Selection Switch on retrofit fixture to choose from 5 color temperatures. Test each to find the best fit.
b. Turn off light switch after selecting your choice.

STEP 5

a. Align trim ring with opening.
b. Secure downlight into can; compression clip holds it in place. Insert spring clips into ceiling.
c. Activate circuit breaker and test light.

STEP 6

Note: To toggle between downlight & nightlight, turn wall switch & night light off, wait 3 seconds, then switch on.

To reset fixture, turn off, wait 5 seconds, then turn on.

Product Details

Recommended Dimmers

Scan for the full compatible dimmer list!

Specifications

Common Troubleshooting

We’ve got you covered! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.

If you still need some assistance, feel free to contact us. Our team of lighting experts are happy to help brighten your day.

Installation

Light isn’t turning on.| Double check if fixture is properly connected and circuit breaker hasn’t been tripped.
Light isn’t bright enough.| Check proper wattage and for unobstructed fixture.
Dimming
Light not dimming to lowest setting.| Ensure minimum dimmer load requirement is met.
Light not dimming smoothly| Verify dimmer compatibility with fixture.
Light not compatible with dimmer switch.| Check light-dimmer compatibility.
Flickering
Light is flickering when turning on.| Check that fixture wiring connections are secure
Light flickering with other lights on the same circuit.| Check that the lights are not overloading the circuit
Light flickering when turned on.| Verify fixture compatibility and that it is grounded.
Light flickering when dimmed.| Verify dimmer switch compatibility.
Buzzing
Fixture buzzing with power outages.| Verify light is connected to surge protector securely
Fixture buzzing with appliances.| Look for nearby interferences that can cause buzzing. Such as televisions, radios, computers, etc.
Fixture buzzing when dimmed.| Verify dimmer switch compatibility.

Light Distribution Angle

Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area.
There are two main types of lighting distribution angles: A symmetric lighting distribution emits light evenly in all directions, creating a coneshaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter lighting. Symmetric lighting is also used to a certain degree in up- lighting. An asymmetric lighting distribution angle, also known as beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spill in other areas. Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more. It is important to note that the lighting distribution angle can also be affected by other factors such as the reflector design of the light source, the type of lens used, and the distance between the light source and the surface being illuminated.

Customer Support

Warranty Policy
This product is covered by our industry leading 7 year warranty.
It gets even better – scan the QR code for 2 extra years of protection!
Scan me for two extra years!

30 Day Return Policy
At Sunco, we value our customers and stand by the quality and performance of our products.
If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.
Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your needs! Contact us at:
Email: support@sunco.com
Call or Text: 844-334-9938
support@sunco.com
844-334-9938
AMERICAN
COMPANY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>