HOMCOM 834-661V90 LED Light Mirror Instruction Manual
- June 4, 2024
- HOMCOM
Table of Contents
HOMCOM 834-661V90 LED Light Mirror
WARNING AND SAFETY INSTRUCTIONS
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Before assembly, carefully read this instruction manual. Refer back to this manual when installing the product to ensure it is fitted safely and correctly. Keep these instructions for future use.
WARNING Risk of fire and electric shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board before installation and maintenance.
- For indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer and all other parts for damage. If damages are found, do not use this product.
INSTALLATION SAFETY
- Before installation, ensure the product is not damaged or has missing parts. Handle the product with care.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces, just in case the drill slips.
NOTE : The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care, are factors that can’t be built into any product. These factors must be supplied by the person(s) caring for and operating the product. Do not install this product in hazardous locations.
CHECK PRODUCT LIST AFTER OPENING THE PACKAGE
- LED Lighted Mirror X1
- Screws for wall X2
- Type A Plastic Anchor X2
- Installation Manual X1
- Junction Box X1
TOOLS YOU MAY NEED
INSTALLATION
-
Measure the distance of the hanging hole.
-
Mark the hole position on the wall.
-
Drill the holes and place the suitable plastic anchors.
-
Arrange the screws on the wall, leaving about 3/8 inch outside the wall, and.
-
Connect the mirror with the main supply.
-
Hang the mirror on the screw.
ATTENTION:
PLEASE CUT OFF THE MAIN POWER SUPPLY BEFORE WIRING!
OPERATION INSTRUCTION
Button lights up when connected to main supply.
- Touch the button to turn on/off the mirror
- Hold the button to adjust the brightness.
- Confirm the setting by removing your finger when it reaches the colour you need.
- The defogging function on the mirror will activate simultaneously with the lights and automatically turn off after 30 minutes of operation.
AFTERCARE INSTRUCTIONS
Before cleaning, ensure the mirror is turned off.
Clean using a soft and dry cloth. Never use cleaning agents or abrasive
materials. Do not allow moisture to come into contact with the lamp.
Customer Support
If you have any questions, please contact our customer care center.
Our contact details are below:
0044-800-240-4004
enquiries@mhstar.co.uk
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park,
Horsenden lane South
Perivale, UB6 7RH
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>