HOMCOM 824-068V90 Remote Tower Fan Instruction Manual

HOMCOM 824-068V90 Remote Tower Fan

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic safety precautions should always be obeyed, including the following:

READ ALL INSTRUCTIONS BEFORE USING
WARNING : To reduce the risk of fire, electric shock, or personal injuries:

1. This fan is for household use only.
2. Before first use, check whether your voltage corresponds to the product nameplate requirements.
3. For safety reasons, please check the status of the power cord and plug before use.
4. When not in use, be sure to turn off the fan and unplug it from the power socket.
5. Be careful when using this equipment near children.
6. Do not run the power cord under carpets, and do not cover the cord with throw rugs. Do not put cord under furniture or appliances. Arrange cord away from traffic areas so that people will not be tripped over by it.
7. Do not operate any fan with the damaged cord or plug. Discard the fan or return it to an authorized service facility for examination and repair.
8. If the fan’s power supply cord is damaged, it must be replaced by the manufacturer or its service agent to avoid potential safety hazards.
9. Use the fan in well-ventilated areas. Place the fan at least 8 inches from any walls to ensure the proper air flow during use. The fan cannot be located directly under or close to the curtain.
10. Do not obstruct the airflow with any objects or place anything in the opening of the fan.
11. Do not use the fan in areas where curtains may be sucked in.
12. Only place the fan on a hard, flat, dry floor.
13. Do not use the product in extreme temperatures, humidity, or dusty environments.
14. Do not put heavy objects on the fan.
15. Do not place the fan below the power outlet that will suck the cord inside to cause damage.
16. When the fan is oscillating, do not touch the fan manually to avoid damage.
17. Be sure to turn off the power supply before unplugging the power cord from the power outlet to avoid short circuit, fire, or electric shock.
18. Do not twist or pull the power cord out.
19. In order to avoid the danger of electric shock, do not unplug the fan when your hands are wet.
20. Children under 8 years old should not operate the fan.
21. This appliance is not suitable for people (including children) with reduced physical/sensory/mental abilities or people who lack experience and knowledge. Unless the above-mentioned people are supervised or instructed by a person who is responsible for their safety.
22. Children should be supervised to ensure that they do not play with the appliance.
23. Ensure that the fan is switched off and unplugged from the power supply before removing the guard.
24. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
25. Please unplug or disconnect the appliance from the power supply before the repair work is carried out.

Brief introduction

This tower fan is equipped with multiple functions, such as 3 speeds, 3 modes, 85 degree oscillation, 12 hour timer, remote control. With the above functions, our tower fan can provide a cool, healthy, and luxurious lifestyle.

Specification

Structure and parts

1. Control panel
2. Air outlet
3. Remote control storage
4. Air inlet
5. Base A
6. Base B

Parts list

Description| Quantity
Remote control| 1
Instruction Manual| 1
Base| 2
Screw (ST4*12mm)| 6

Installation

1. Taking out the two bases from the gift box. Connect them together. Then fasten two bases by 2 pcs ST4*12mm screws (As shown below)
2. Connect the fan body to the base with 4 pcs ST4*12mm screws (As shown below).

Function

1. ON/OFF
   Press power button to turn the fan ON/OFF. Press once, the fan will start operation. Press button again to stop the fan.

2. Mode
   The model has two modes: Normal/ Sleeping. When you turn on the fan, the default mode is Normal wind mode. If you want to change the mode, please press on remote controller or keep pressing on the control panel for 3 seconds, and the mode will change to sleep mode.
   Sleep wind mode:
   The Sleep light indicator will display when this mode is selected, the fan will run into the Min normal wind and the buzzer will be turned off immediately. 5 seconds after the cessation of the manual operation, the light will dim and then go out. If you want to change the wind speed, just Press on the remote controller or press on the control panel to choose wind speed to choose the wind speed ranging from 1-3. In this mode, the wind speed will be reduced by one level every half an hour, and the level 1 wind speed will be maintained until it is turned off.

3. Oscillation
   Press this button on the remote controller or keep pressing button on the control panel for 3 seconds, the fan will oscillate from the left to the right automatically. Press button on the remote controller or keep pressing button on the control panel for 3 seconds again to stop oscillate.

4. Timer
   Press the on the control panel or press on remote to select the timer you want, every push will add 1H. The timer is from 1-15 hours.

5. Wind Speed
   Press on the remote controller or press the on control panel to choose wind speed, the wind speed ranging from 1-3.

Maintenance and Storage

1. Always remove the plug from the socket-outlet and allow the fan to stop before cleaning it.

2. Clean the external surfaces of the fan with a soft damp cloth (not dripping wet cloth).
   WARNING :
   Do not immerse the fan into water.
   Do not use any cleaning chemicals such as detergent and abrasive. Do not allow the interior to get wet as this could cause dangerous consequences.

3. When the unit is not in use, make sure that it is unplugged from the wall socket. To store the fan, you may pack it in the original carton and store it in a cool and dry place.

4. In case of malfunction or doubt, do not try to repair the fan by yourself; otherwise it may result in a fire hazard or electric shock.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>